Accept/reject changes and adjustment brush buttons disappeared

Similar Questions

• Pavilion dv6-1140ew: 1140ew button Mute and the wireless button disappeared

  My Mute button and the wireless button disappeared. They are neither orange nor blue, they are not highlighted.

  I did my Lalonde normal and regular cleaning. With the help of the manual I disasembled the phone until I could access the fan/heatsink and clean it with air preasured. After reassembling the laptop, I discovered that the two buttons are not appearing on the cover of the switch. I thought that I must have failed to plug something properly, but after checking twice, I am sure that everything is as it should be. The wireless card works perfectly, so are the speakers. The computer turns on automatically (I'm actually hit him), wifi works perfectly (well, I'm on it) scrolling volume works ok, so media buttons. But everything I try, I cannot get the Mute and buttons wireless to work once more.

  Any help would be welcome.

  PS.

  I tried the hard reset, with deactivation of all sources of power. Does not work.

  Hi @Schanez,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-1140ew Notebook and the Mute button and the wireless button not working not properly. This package contains the software that enables the quick launch on the keyboard to program buttons. Simply download and install sp46731.exe.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• 5 Lightroom adjustment brush has disappeared, just the cursor of the watch. I don't know what size I use. Just happened without reason. Looked in the Pref and there nothing to adjust, etc.

  Just using the adjustment brush in Lightroom 5 on a picture and suddenly the circles brush missing lmao! Cannot find anywhere to return, thought that maybe I hit a button accidentally turning off or something. All I get is the mouse cursor while I use the brush, but I have no idea how the brush is large or where the hell the brush is used! Trying to close the Application and restart as you do, and nothing changes, still no brush.

  Using Mac OSX 10.9.4 with Lightroom 5.6

  Hi GlennMorley

  Please try to start your system at startup.

  See below on how to connect at startup.

  http://support.Apple.com/kb/HT1564

  Launch of Lightroom and check if the adjustment brush appear. Restart the computer normally, and then check in your original account.

  Thank you

• Cannot change the adjustment brush in LR3

  A week after installing LR3, I suddenly lost the ability to go back and change the brush strokes. The effects of the brush strokes are still there, but the circle that indicates where the brush started disappeared. Without it, I can't select the brush stroke to change its settings.  Everyone knows about this problem?  How did you solve this problem?  At the moment my solution is to cancel the brush stroke, change the settings on the brush and then make a new brush.  :-(

  Press 'h' on the keyboard. This shortcut mask/poster filter adjustment brush/degree points.

• Adjustment brush anchors disappeared

  While using the adjustment brush to point 2.3, LR has crashed on me and since then, all the anchor points for my brushes settings I've done about photographs and new adjustments have disappeared (but the effects are still there of course). I tried the upgrade to 2.4 and this has not solved the problem. It seems that there is no way to go back and select/change a setting. Any ideas?

  Try to press 'H' for 'hide/show '.

• CS5-Mac-RAW adjustment brush has disappeared!  Clone/spot tools do not work.

  My adjustment brush does not display when I'm trying to use it.  Only a normal cursor appears.  The works of brush ghost, I don't control.

  I also noticed that the tool clone and stain remover work well.  (I've been open images in PS to change instead of trying to use these tools.)

  I do NOT have the cover lock and I restarted the program and the computer.  I did a disk utility clean up to make sure things were very good.

  Suggestions?

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Camera Raw 6.7.1 update

• How to get back to changes in adjustment brush?

  I use LR 4.2 and I have a question about non-destructive Editor, specifically the use of the adjustment brushes.  After that I work with an adjustment brush and then continue with my editing that I can't figure out how to make the settings for which was darn earlier on the adjustment brush area.  With all the other editing features, I can change something, and then later make a change.  For example, I can put 10 highlights and then later I can change bulleted highlights-15 and then later change it to something else.  With things, I did with brushes of adjustment well that I did not understand the technique to do.  If I select adjustment and then brush click the box that I had changed earlier with an adjustment brush, apparently not reselect this area so that I can tweak it.  Is there a way to go back and change the fields selected with an adjustment brush?

  Yes, you can change the parameters of the adjustment brush after the fact by opening the adjustment once Brush tool again and selecting the PIN for the mask you want to adjust. The PIN will then have a black dot in the middle and adjustments for this mask will be in th cursor Panel, you go!

• Drag and Drop exercise: buttons disappear

  Hello

  When I hit the button 'Send' an exercise slide / move quiz buttons 'Back', 'Reset' and 'Send' (that come automatically with the Drag and Drop exercise) disappear.

  Any idea what goes wrong?

  I see, in English these are the buttons cancel, restore, and submit. Only the last is really necessary. The other two buttons can be selected in the Actions tab, but are not mandatory.

  

  If you have kept the default settings, which means 1 attempt and the two actions on the success and failure are left to continue it is normal that all the buttons disappear after clicking on the submit button. They will also disappear when you gave a correct answer, even if efforts are not exhausted. They will remain on the slide when you have an incorrect answer and attempts are not exhausted: in this case, the buttons will remain and the legend of the failure appears. With undo the last action can be cancelled, with reset all sources of drag are returned to their original location. The two buttons are also active before the submission of the response.

  You can find more tips on D & D:

  http://blog.lilybiri.com/drag-and-drop-tips

  & Slipped in 2016 with Captivate 9 - Captivate blog

• Soft Proofing and adjustment brush / Spot removal problems

  Hello

  Since the last update (at least I think) to 6.5 that I have a problem when soft proofing is turned on. In particular, the adjustment brush and the brush of spotting does not work smoothly. The first problem is that when you try to make smaller or larger brush (keyboard and Tablet) the brush shows the size have immediately brush outside the window or click on the image to see the size of the brush (brush of detachment and adjustment) and the cash withdrawal is very slow and if I want to spend the part I want to remove to make it better appearance it does not update immediately when moving. Also when using either the computer fans brush starts to kick in and work hard. Tried two GPUs and extinguish the same result. but as I turn soon soft proofing off the coast of the brushes as planned work and also the fans to stay out of

  so if someone has problems with these two brushes you might want to look into the option to see if Proofing is enabled

  I have not noticed this. However, I usually do all my withdrawal in cash without proofing turned on. Normally, the only thing I do when the soft proofing is set things like saturation, lights and shadows. Things that affect the overall appearance of printing based on the book that I use. What are the specifications of your computer? OS, RAM, etc.

• Recently upgrade to Lightroom 4 and adjustment brush does nothing.

  I click on the brush and reset all the sliders with the exception of exposure, for example.  I have set to brush and start brushing on the target area.  Nothing happens and does not show the red mask overlay on brushed surface.  Use Mac 10.6.8.  I have also several catalogs upgrade - catalog Lightroom 3-2, -3 and -4.  I'd rather have a single.

  Check the flow rate (how long the effect accumulates) and density (how high it can go).

• Histogram does not change when I change the adjustment brush sliders

  I am editing in Lightroom 5, but none of the dials on the mounting accessories (brush) histogram fill when I adjust them ("effects").

  I uninstalled Lightroom 5 completely empty the trash and reinstalled again, Lightroom 5 still does not meet all of the changes.

  Any help would be greatly appreciated that my limit is urgent...

  Thanks in advance,

  Kylie

  The sliders on the other hand, work in the context of the Brush tool - not outside the context of the Brush tool.

  For example, nothing happens when I slide the exposure slider or any other sliders also. Don't know what else I'm missing...

• I have a mac and my bookmarks bar and the "back" button disappeared...

  That's about it... my toolbar disappeared. It still works if I go into the region of bookmark. In addition, I have more a "back" button...

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Open the Customize via "view > toolbars > customize.
  • Make sure the "Bookmarks Toolbar items" are on the personal bar
  • If the "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the toolbar palette in the window the bookmarks toolbar Customize
  • If a missing element is located in the toolbar palette and then bring her back in the window customize the toolbar
  • If you don't see an item on a toolbar and in the toolbar palette, then click on the "Restore default" button to restore the default toolbar set up.
  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.com/kb/back+and+forward+or+other+toolbar+items+are+missing

• The new Google tab page has disappered and my custom buttons disappeared, although according to Google options, these features are enabled.

  Everything worked well in Mozilla when I finally used my computer. Today, when I opened my browser, it did not, and I kept getting a message from shutdown script. The script error is apparently related to the Extentions Mozila handler, if this information is useful. When he did load the page new Google tab and my ad added buttons missing, although according to the menu options in the toolbar, these features are enabled. I have uninstalled and reinstalled the toolbar and checked to make sure I have the latest version of Firefox. Is it possible to fix this? Is there something I could have done to make?

  Just to clarify, your browser is Mozilla Firefox (Firefox for short), not the Suite Mozilla (Mozilla for short). You are using the latest version, which is good.

  As for your question, it is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and themes and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

  If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please be afraid not to follow my instructions to the line, as everything can be easily undone.

• Close and minimize/maximize buttons disappear when you use a theme (Windows 8).

  I have no idea why he did this. I have all the Windows updates and the latest version of Firefox as well. Please report if you have a solution or get to work for then and know if/when this will be fixed.

  It works OK with the default theme, or who suffers as well in maximized mode?

  Change the Windows theme has an effect any?

  Toggles the false browser.tabs.drawInTitlebar on the topic: config page has an effect any?

• Suspend and expand/collapse buttons disappeared from the top of the Windows Sidebar

  I have a new Mac Mini that I loaded with Windows XP & VMware Fusion 2.0 + upgrade, all at the end of November 2008.   Until very recently, when the Windows Sidebar appeared, she was "buttons" on its top edge, grey-strip 'Suspend' (left) & enlarge/reduce (right).  These buttons have disappeared.  So, I have a workaround.  I use the Help menu in which I type "Suspend", which adds a line to 'suspend' drop-VM & allows me to suspend windows.  I also have a workaround to enlarge/reduce function.

  Why have I lost these buttons?  But, more importantly, how to restore their superior, gray band edge of the Windows Sidebar?

  Thank you.

  birchie

  birchie wrote:

  I have a new Mac Mini that I loaded with Windows XP & VMware Fusion 2.0 + upgrade, all at the end of November 2008.   Until very recently, when the Windows Sidebar appeared, she was "buttons" on its top edge, grey-strip 'Suspend' (left side) & enlarge/shrink (right).  These buttons have disappeared.  So, I have a workaround.  I use the Help menu in which I type "Suspend", which adds a line to 'suspend' drop-VM & allows me to suspend windows.  I also have a workaround to enlarge/reduce function.

  Why have I lost these buttons?  But, more importantly, how to restore their superior, gray band edge of the Windows Sidebar?

  Well your terminology is a little off but I think that's what you're referring to...

  What you have looks like this...

  

  You want looks like this...

  

  How get you...

  From the OS X help file...