Access MMIC on C210 with IExplorer 10

Similar Questions

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• Can I access on my iMac with MacBook cd drive

  Can I access on my iMac with MacBook cd drive

  You can if share you it on the network.   But you need to enable the sharing of files on the CD while it is inserted in the Mac by reading the information in the file menu, select it in the Finder.      Unfortunately the MacBook not having Firewire or love at first sight, you cannot use Disk Mode target using the player.

  It can be slow, is it a USB - C ethernet card or WiFi.    If you want to make sure you get the highest possible speed a USB optical drive should work fine.  http://www.MacSales.com/ made a few that actually work very well with Macs.

• Desktop remote access simultaneously in windows with multiple session in Windows Server 2008 support?

  I would like to have a remote desktop solution that allows me to connect to remote computers even while users are connected, with the help of another session. The idea is that the user working locally in the remote system can function normally undisturbed by the remote user. I have tried TightVNC , but I couldn't understand how to enter an independent session. I am using Windows Server 2008 and I want two users access to the server with two different sessions as remote users.

  There are forums dedicated to Windows Server, please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• Cannot access my IOGEAR BOSS with Vista home premium

  I have problems to access the directories on my external device with my new PC, and I hope you can help me.

  I just replaced my old HP Desktop running XP OS with a new DELL desktop which is under Vista Home Premium (32 bit) and now I can't access the device of utility of IOGEAR BOSS. I was able to access the external device with it and can be accessed with 2 other PC at home now. Can't seem to connect to the external device with this new system.

  What I can do:
  I am directly connected the BOSS and can access the internet via the BOSS. I also see the external device in my network. I can ping, tracert it. That's where! Just can't log in there!

  What I can't do
  Map a drive to the external device or authenticate in the unit. (When I try to access it, it prompts me for the ID/PW as it should, but he does not like the ID/PW I provided). I know that the PW & ID works calibrated it works on 2 other PC's connected on it.

  Steps to access the external device
  I am trying to access by taking the following measures:
  1 map a network drive
  2 assign the letter Z
  3 path: \\192.168.2.1\share
  4 pushes. me for ID & PW - admin\ *.
  5 ERROR Message: Logon FAILURE - NOTES: now shows the ID: Desktop\admin

  What I've done
  1 Contcted IOGEAR - checked all the settings of security, network and pwermission and reset the permissions of the external device to the original state. Did not work. They sent me to Ms & Dell.
  2. contacted Dell - did the same exact steps. They sent me Ms.

  Can anyone help?

  According to the site Web of IOGEAR (http://www.iogear.com/product/GNS1000/) it is only compatible with Windows® 98SE, 2000, ME, XP.  So so looking for a compatibility issue.  The update of the firmware is from March 2006, you might want to update the Firmware and see if that helps, but with compatibility issues, it's a scenario 'best effort '.

  Below you will find the IOGEAR support page, I hope that helps solve your problem.

  http://atenpbsr2.ATEN-USA.NET:8000/Inet_tech/form/us/index.asp

  Stephen Davies MS

• Control access to the network with ACS device

  Hi all!

  I currently have in place an Appliance, Cisco Secure ACS using Windows as main server authentication. Cisco Secure acts as a GANYMEDE server +. I have two groups defined in Cisco Secure: Netadmins and security ITD. Users of the Netadmins group need access to all switches and routers on the network. ITD security must only access async line 53 on a router 2611 for a band of a firewall and no other access to all network devices offline. How can I limit access to the Cisco Secure security ITD group to line 53 only?

  My current config on this router is:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  connection ITDSEC authentication group Ganymede + line of AAA.

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  line 53

  No exec

  authentication of the connection ITDSEC

  transport of entry all

  StopBits 1

  Speed 115200

  line vty 0 4

  exec-timeout 30 0

  login timeout 120 response

  login authentication netadmins

  but users in the ITD security can still access by vty and then reverse telnet to any asynchronous line on the router. In addition, security ITD always access any switch or router using telnet: what should be my setup on these devices? I do an ACS configuration?

  All other devices:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  Line con 0

  password 7 141C015C5806

  login authentication netadmins

  line vty 0 4

  password 7 11020A 524310

  login authentication netadmins

  line vty 5 15

  password 7 11020A 524310

  login authentication netadmins

  Any help will be greatly appreciated.

  Hello

  In the security group, I would create a Restriction of access to IP network with an entry permit. Essentially to allow access to the single port on 2611 only.

  The AAA Client field is the name that you gave to the 2611 in the network config. Address will be * unless you want to restrict access to the ip or address. Port... never quite sure with async if the port value must be "async 53" or "line 53".

  If you look in the pass/fail for the nas-port attribute, you'll see what that T + sends to the ACS. This should help you know what to put in the NAR.

  Mounira

• How do I access the folder allowed with standard user?

  I have 2 accounts, one is standard, the other is the admin account.

  My PC has a permitted record that only allow admin to access.

  I always connect with the standard user and sometimes need to access these files from parmitted, but no authorization for the standard.

  So, every time I change the user access. It's too boring.

  I tried the command runas, but does not...

  Please give me some advice that can access the folder allowed with the standard user, if possible.

  Thank you

  I have 2 accounts, one is standard, the other is the admin account.

  My PC has a permitted file that allow only to admin for access to.

  Please give me some advice that can access the folder allowed with the standard user, if possible.

  You must change the permissions of this folder so that everyone has full access.

• Get the error message "error loading DLL communication" when trying to access Wireless Utility Setup with a LexMark impact S305 printer

  Original title: trying to access Wireless Utility Setup with a printer LexMark impact S305 on windows 7, can nybody help me?

  lxeapss: error loading DLL communication, I get this pop-up box several times trying to access Wireless Utility Setup with printer. I have tried, defrag, virus scan (vipre), stop, went to the Lexmark Web site to get the latest software downlaod for printer?

  Hello

  Click on the link below.

  http://support.Lexmark.com/index?page=content&ID=so4452&locale=en&UserLocale=en_US

  Hope this information helps.

• How to access the PDB (s) with multiple shared users?

  is it possible to access the PDB files with multiple shared users?

  Consider the scenario:

  I have two common user:-c# a PDB and c ##b:-PDBTEST

  I am facing problem:

  When I connect with the common user - c ##b, I am not able to see the table of PDBTEST created by connecting you with c# a.

  However, I have assigned rights in PDBTEST for both users c# a and c ##b.

  For the common c ##b user, is there another way, I can access PDBTEST?

  I'm following measures:

  Connect as sysdba

  1 > created two user c# a and c ##b (container = ALL)

  2 > common role granted with all privileges: c ##role (container = ALL)

  3 > assigned c ##role both user: c# a and c ##b (container = ALL)

  4 > created PDB: PDBTEST

  Changed session and containing value = PDBTEST

  5 > granted c ##role to two users: c# a and c ##b inside the PDBTEST

  6 > connect with c# a (and not as sysdba)

  Changed session and containing value = PDBTEST

  7 > table created and inserted record: TestTable

  8 > connection with c ##b (and not as sysdba)

  Changed session and containing value = PDBTEST

  I'm not able to access the record of "TestTable" after you connect with c ##b...

  Even more, if I connect with c# a, I can access inserted records.

  Help, please.

  Hi Big Boss,

  It has nothing to do with the PDB, it is just the works of oracle way - to query a table that belongs to another yo uhave to precede their schema name unless you do one of 2 things

  (1) create a synonym (public or private) for their purpose

  (2) use alter session set current_schema

  So in your case you'd be (both logged in as ##b c)

  (1) create synonym c# table_name #a.table_name;

  (2) alter session set current_schema = c# a;

  Now, if you say

  Select * from table_name as c ##b it will work.

  (1) is permanent

  (2) must be adjusted each time you connected

  I think you're confusing a pdb with a schema file.

  See you soon,.

  Rich

• Access movieclips of movieclip with a loop?

  There is a moviclip under the name of the instance of 'stage', inside, I have 4 'connect' moviclips - "log0", 'log1 ',... "log3."

  The thing is, I don't know how to access each of them with just a loop of the Interior. As if I had 1000 balls inside, it's stupid to write code by hand to each of them.

  My Code:

  for (var i: uint = 0; i < 4; i ++)

  {

  var x: int = stadium.this ["log" + i] .x;

  ...

  }

  then of course, it gives me an error, because the way it is written is incorrect.

  What is a solution for this? Thank you...
  

  use:

  for (var i: uint = 0; i<4;>

  {

  var xvar:int = stage ["log" + i] .x;

  ...

  }

• Problem with iExplore to access the view manager

  Hi all.

  I installed a small lab environment to try VMware View 4. On the other hand, it's great.

  I m just use PCoIP to access my vDesktops.

  If I use VMware client View all works very well.

  But, when I try to access my vDesktop using iExplore (6 and 7) I get this error:

  "The Office has not opened (vDesk_XP_PoC). The Protocol to display for this office is currently disabled. Please contact your system administrator. »

  Any ideas?

  Best,

  Eduardo.

  
  
  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  You can use PCoIP via the customer view and not view portal.  And it looks like you does not allow users to choose a different protocol (such as RDP using View Portal) when the pool was the installation.  If you authorize the change of Protocol, then it should automatically connect via RDP via view portal.

  -jonathan

• Several Sites are blocked by saying that the certificate is not valid. I can access each of them with a different browser

  Most of them are sites I visit every day. I downloaded opera and it works fine so I don't think it's a firewall or security problem. Occur after the update. I can't even access the Firefox web site tells me that it isn't valid too.

  Hi pipefitter619, please check that. "DigiCert High Assurance EV-1 CA" is correct for this site. On the error page, could you expand the technical Details section and search for the error code, and paste it here. It usually begins with sec_error...

  For avast!, if you go into the settings of Web Shield, can you try disabling secure connections analysis? I don't have avast! but, from the various posts on the web, it could be under "Scan for secure connections" or "SSL scanning.

• Cannot access Mac on LAN with the name of user and password correct

  I have two Mac Pros, it of brand-new and came with El Capitan installed, the other I've just updated to El Capitan.

  I need to have access to the Mac via my local network and would usually use the option in the sidebar of the Finder. I can't access the new Mac.

  I have the good registered user name and password, but every time I try to connect it just shakes and refuses to connect.  Strangely, if I choose screen sharing, it works perfectly!

  Is there something obvious that I do not forget to allow me to access the first Mac?

  Thank you

  Adam

  by chance, you have file sharing enabled on the new Mac? (Preferences system - share - file sharing) Looks like you have active screen sharing, but not file sharing.

• I have blank page while trying to access the virtual shop with Journ.E tou

  After the update and reset, the page is empty, no access to the virtual store

  as I entered the serial number S / n: PX1530U-1ET1 :-) the correct S / n: this is not used and I don't know how I can fix it with correct password

  What to do about it? Without virtual store shelf is useless.

  Thanks for any solution...

  Post edited by: mirokmiro

  My personal accounts is: 33460

  Can't anyone help me?

  Thank you