Access movieclips of movieclip with a loop?

Similar Questions

• creation of an area of dynamic text inside a movieclip using a loop for

  I'm having issues creating several areas of dynamic text inside a movieclip using a loop for.  I use 2 ACEs.  Here is the code I've created so far

  var leading: Number = 0;

  function drawClip (): Void

  {

  this.createEmptyMovieClip ("mc", 10);

  for (i = 0; i < 5; i ++)

  {

  mc.createTextField ('text areas' + i, this.getNextHighestDepth (), 0, leading, 200, 200)

  MC ["text boxes" + i] .text = i;

  leader + a = 20;

  }

  }

  drawClip();

  Create a mc but she only display the number 5

  Any thoughts?

  You are cionstantly, crushing the textfield created previously due to the use of the wrong depth define.  You point to 'this' to get a depth value, but he planted inside 'mc', so it's always at the same depth since "this" index of depth does not change.  Use...

  mc.createTextField ('text areas' + i, mc.getNextHighestDepth (), 0, leading, 200, 200)

• Added an movieclip with motion tween.

  Hello!!   I created a movieclip with a motion tween and I added it to the stage with the following code: var pop: msgBox = msgBox new; addChild (pop); the msgBox is the class name of the movieclip and pop is the name of the instance of it.   the problem is that the animation is not read correctly. for example, I drew a rectangle and converted to a movieclip symbol and then I converted inside himself to a graphic symbol. I created a motion tween growing form of movieclip, but when I added it with the above code, it starts to animate properly but on its iteration, it starts to not behave correctly. It seems that flash pro, adding a new instance on each iteration that overlap on the previous.   What should I do to fix this?   Bravo!   Atar.

  That is roughly what I have described as being your problem... come back you on the frame when you create a new instance, so it gets created.  You will need to put a conditional around this code any process only once if you only want to process once.

• ScrollBar of a movieclip with dynamic content

  How to make the roll bar work for a movieclip with dynamic content.

  var senderLoad: LoadVars = new LoadVars();

  var receiveLoad: LoadVars = new LoadVars();

  senderLoad.sendAndLoad ("http://www.web.com/my_php.php", receiveLoad, "POST" ');

  receiveLoad.onData = {function (src)}

  var messageA:Array = src.split(",,,");

  messageA.pop ();

  var xPosition:Number = 0;

  var yPosition:Number = 0;

  for (var i: Number = 0; i < messageA.length; i ++) {}

  var msgA:Array is get [i].split(",,");.

  _root.patHolder.attachMovie ("garSpecBtn1", "btn" + i, _root.patHolder.getNextHighestDepth ());

  _root.patHolder ["btn" + i] ._x = which;

  _root.patHolder ["btn" + i] ._y = PositionY;

  PositionY = PositionY + 31.0;

  _root.patHolder ["btn" + i].textBlack.text = Msgto [0];

  _root.patHolder ["btn" + i] .number_lnk = "http://www.web.com/images/" + Msgto [0] + ".png"; ""

  _root.patHolder ["btn" + i] .txtN = "pattern" + Msgto [2];

  _root.patHolder ["btn" + (i)] .onRollOver = btnOverNumber;

  }

  }

  The scroll bar should work with patHolder.

  Add a scrollpane to your stage component and assign an instance name (for example, sp).  assign the symbol from the library of patHolder a login link (for example, patHolderID).  You can then use:

  sp.contentPath = "patHolderID";
  var _root.patHolder:MovieClip = sp.content;

  var senderLoad: LoadVars = new LoadVars();

  var receiveLoad: LoadVars = new LoadVars();

  senderLoad.sendAndLoad ("http://www.web.com/my_php.php", receiveLoad, "POST");

  receiveLoad.onData = {function (src)}

  var messageA:Array = src.split(",,,");

  messageA.pop ();

  var xPosition:Number = 0;

  var yPosition:Number = 0;

  for (var i: Number = 0; i

  var msgA:Array is get [i].split(",,");.

  _root.patHolder.attachMovie ("garSpecBtn1", "btn" + i, _root.patHolder.getN extHighestDepth());

  _root.patHolder ["BTN" + i] ._x = which;

  _root.patHolder ["BTN" + i] ._y = PositionY;

  PositionY = PositionY + 31.0;

  _root.patHolder ["BTN" + i].textBlack.Text = Msgto [0];

  _root.patHolder ["BTN" + i] .number_lnk = "http://www.web.com/images/" + Msgto [0] + ".png"; ""

  _root.patHolder ["BTN" + i] .txtN = "pattern" + Msgto [2];

  _root.patHolder ["BTN" + (i)] .onRollOver = btnOverNumber;

  }

  }

• How to copy a movieClip with filters and alpha in bitmapdata?

  I have a movieclip with an image that has transparency and the filters applied to the movieclip. I know that I can use 'draw' to copy the movieclip on bitmapdata object, but it does not copy the filters and the transparency of the image. How can I copy these so the bitmapdata matches the original movieclip in appearance?

  Sorry, Lee, but the draw very good copy filters. And thankfully so - what happens if the clip in question is not a parent - that is to say, it's parent is the stage... that wouldn't work at all then.

  I'm not sure of the problem of the OP, but draw copies certainly filters and transparency without problem.

• How to print a Movieclip with filter effect?

  Hi all

  I have a movieclip, which is to have the shadow and glow effect applied to the filter.

  I don't know how to print through flash. Pls help me...

  Thank you
  Claudine

  If mc is your movieclip with a filter, use:

  import flash.display.BitmapData;
  var bmpd:BitmapData = new BitmapData (mc._width, mc._height);
  bmpd. Draw (MC);
  var tl:MovieClip =;
  tl.createEmptyMovieClip ("h", 1);
  h.attachBitmap(bmpd,1)

  var pj:PrintJob = new PrintJob();
  PJ. Start();
  pj.addPage(h,null,{printAsBitmap:true});)
  PJ. Send();

  p.s. Please mark this thread as answered

• Create an array of MovieClips with a statement

  Hello
  I'm trying to create a matrix of MovieClips with a statement, but it does not work.
  The code is the following:
  
  var PicLoader:MovieClipLoader = new MovieClipLoader();
  
  function createMovieClips() {}
  var c:Number = 1;
  var Pic1:MovieClip = new MovieClip;
  var Pic2:MovieClip = new MovieClip;
  var Pic3:MovieClip = new MovieClip;
  var Pic4:MovieClip = new MovieClip;
  var Pic5:MovieClip = new MovieClip;
  var Pic6:MovieClip = new MovieClip;
  var Pic7:MovieClip = new MovieClip;
  var Pic8:MovieClip = new MovieClip;
  var Pic9:MovieClip = new MovieClip;
  var Pic10:MovieClip = new MovieClip;
  var Pic11:MovieClip = new MovieClip;
  var Pic12:MovieClip = new MovieClip;
  var Pic13:MovieClip = new MovieClip;
  var Pic14:MovieClip = new MovieClip;
  var Pic15:MovieClip = new MovieClip;
  var Pic16:MovieClip = new MovieClip;
  for (var i: Number = 1; i < = 4; i ++) {}
  for (var j: Number = 1; j < = 4; j ++) {}
  _root.createEmptyMovieClip (eval ("Peak" + c), _root.getNextHighestDepth ()); eval("PIC"_+_C)._x = i * 100; eval("PIC"_+_C)._y = j * 100;
  _root. PicLoader.loadClip ("' http://www.sages.hu/galeria/kepek/kep1.jpg ', eval ("_root."+ eval ("Peak"+ c)));
  c ++ ;
  }
  }
  }
  
  createMovieClips();
  
  What I've done wrong?

  It is quite a mess. Try:

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• Can I access on my iMac with MacBook cd drive

  Can I access on my iMac with MacBook cd drive

  You can if share you it on the network.   But you need to enable the sharing of files on the CD while it is inserted in the Mac by reading the information in the file menu, select it in the Finder.      Unfortunately the MacBook not having Firewire or love at first sight, you cannot use Disk Mode target using the player.

  It can be slow, is it a USB - C ethernet card or WiFi.    If you want to make sure you get the highest possible speed a USB optical drive should work fine.  http://www.MacSales.com/ made a few that actually work very well with Macs.

• Machine condition with timed loop?

  Hello world

  Is it possible to have a state machine with timed loop? i.e. on the last State, wait us here until the end of the period to return to the initial state again.

  Thank you

  crazycompgeek wrote:

  Hello world

  Is it possible to have a state machine with timed loop? i.e. on the last State, wait us here until the end of the period to return to the initial state again.

  Thank you

  Yes.  However, when the loop is running, there is no way to stop the program or do any other action.  But if this is what you want, yes it is possible.

• Application crashes with parallel loops

  I developed an application that controls a digital fluorometer using a C++ DLL (provided by the seller) via a USB connection. I created specifically as QMH architecture because long scans on the fluorometer may take a few seconds and I want the user to be able to control the façade while the equipment is running in parallel. For some reason any, when the loop of material control is bound to its analysis, the façade hangs. If I click anywhere in the window, I get the «...» "" Message do not answer ' in the toolbar until the scan is finished. " While this happens, memory and processor remain substantially the same so I do not think he is tied up system resources. In addition, Windows normally responds.

  I think the DLL is called to a level that affects all vi and when the call of the DLL will be made, each process LabVIEW gets put on hold. I'm leaving basic with this assumption? If this is not the case, how could one breach of this situation?

  Yes - your problem is with the loop of wire/root LabVIEW UI. There is a very good article about it here.

  Your call library function node is set to 'Run' in the UI thread which means that it will be executed in the same thread as stock user interface or anything else that requires that the user interface thread. In other words, no other action of the user interface can occur when your C++ DLL function runs - it blocks the thread to continue.

  You need to know if the DLL is thread-safe, and if this is the case, change the method of appeal of the C++ DLL in the call library function node to 'run in any thread '.

  You can make a difference in the color of the COLD LAKE:

  

• Desktop remote access simultaneously in windows with multiple session in Windows Server 2008 support?

  I would like to have a remote desktop solution that allows me to connect to remote computers even while users are connected, with the help of another session. The idea is that the user working locally in the remote system can function normally undisturbed by the remote user. I have tried TightVNC , but I couldn't understand how to enter an independent session. I am using Windows Server 2008 and I want two users access to the server with two different sessions as remote users.

  There are forums dedicated to Windows Server, please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• Cannot access my IOGEAR BOSS with Vista home premium

  I have problems to access the directories on my external device with my new PC, and I hope you can help me.

  I just replaced my old HP Desktop running XP OS with a new DELL desktop which is under Vista Home Premium (32 bit) and now I can't access the device of utility of IOGEAR BOSS. I was able to access the external device with it and can be accessed with 2 other PC at home now. Can't seem to connect to the external device with this new system.

  What I can do:
  I am directly connected the BOSS and can access the internet via the BOSS. I also see the external device in my network. I can ping, tracert it. That's where! Just can't log in there!

  What I can't do
  Map a drive to the external device or authenticate in the unit. (When I try to access it, it prompts me for the ID/PW as it should, but he does not like the ID/PW I provided). I know that the PW & ID works calibrated it works on 2 other PC's connected on it.

  Steps to access the external device
  I am trying to access by taking the following measures:
  1 map a network drive
  2 assign the letter Z
  3 path: \\192.168.2.1\share
  4 pushes. me for ID & PW - admin\ *.
  5 ERROR Message: Logon FAILURE - NOTES: now shows the ID: Desktop\admin

  What I've done
  1 Contcted IOGEAR - checked all the settings of security, network and pwermission and reset the permissions of the external device to the original state. Did not work. They sent me to Ms & Dell.
  2. contacted Dell - did the same exact steps. They sent me Ms.

  Can anyone help?

  According to the site Web of IOGEAR (http://www.iogear.com/product/GNS1000/) it is only compatible with Windows® 98SE, 2000, ME, XP.  So so looking for a compatibility issue.  The update of the firmware is from March 2006, you might want to update the Firmware and see if that helps, but with compatibility issues, it's a scenario 'best effort '.

  Below you will find the IOGEAR support page, I hope that helps solve your problem.

  http://atenpbsr2.ATEN-USA.NET:8000/Inet_tech/form/us/index.asp

  Stephen Davies MS

• Control access to the network with ACS device

  Hi all!

  I currently have in place an Appliance, Cisco Secure ACS using Windows as main server authentication. Cisco Secure acts as a GANYMEDE server +. I have two groups defined in Cisco Secure: Netadmins and security ITD. Users of the Netadmins group need access to all switches and routers on the network. ITD security must only access async line 53 on a router 2611 for a band of a firewall and no other access to all network devices offline. How can I limit access to the Cisco Secure security ITD group to line 53 only?

  My current config on this router is:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  connection ITDSEC authentication group Ganymede + line of AAA.

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  line 53

  No exec

  authentication of the connection ITDSEC

  transport of entry all

  StopBits 1

  Speed 115200

  line vty 0 4

  exec-timeout 30 0

  login timeout 120 response

  login authentication netadmins

  but users in the ITD security can still access by vty and then reverse telnet to any asynchronous line on the router. In addition, security ITD always access any switch or router using telnet: what should be my setup on these devices? I do an ACS configuration?

  All other devices:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  Line con 0

  password 7 141C015C5806

  login authentication netadmins

  line vty 0 4

  password 7 11020A 524310

  login authentication netadmins

  line vty 5 15

  password 7 11020A 524310

  login authentication netadmins

  Any help will be greatly appreciated.

  Hello

  In the security group, I would create a Restriction of access to IP network with an entry permit. Essentially to allow access to the single port on 2611 only.

  The AAA Client field is the name that you gave to the 2611 in the network config. Address will be * unless you want to restrict access to the ip or address. Port... never quite sure with async if the port value must be "async 53" or "line 53".

  If you look in the pass/fail for the nas-port attribute, you'll see what that T + sends to the ACS. This should help you know what to put in the NAR.

  Mounira