Access NAC ' t saved on hard disk images, shows that I have no authorization

Similar Questions

• I can't and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box

  I can not and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box. Firefox displays gooblygook, even if the name of file is an html element, the Notepad of Windows crashes, MS Excel does not recognize the file type. MS Word also displays goobblys when the file has no file extension.

  If you use the file printing, then you will get a file that is supposed to be sent to a printer, and this file has any sort of code formatting for this printer.

  Open such a file in Firefox or a text editor can only work if you use one printer for text to print the file to, then make sure that such a printer is installed and selected.

• I can't get my hard drive to recognize that I have a CD in the tray

  I can't get my hard drive to recognize that I have a CD in the tray.  I can only open and view those that I already copied. Why?

  There are a number of possibilities here.

  1. assuming you have tried several different blank CD (if you are fairly confident that the problem is not the media), it is possible that the laser "burning" the recordable CD is dead. Because this isn't the same laser that reads the CD, you can always read but not write.  If this is the case, the only solution is to buy a new CD player (not expensive).

  2. your CD drive (E :) shows when you click on my computer?  I think it does, or you did that you can open and view copies of files, you have already copied to other CD.

  3. open Device Manager (start > run > devmgmt.msc > OK)

  • Expand the category of CD-ROM/DVD-ROM readers by clicking on the + sign to the left
  • Y at - it a warning next to the entrance icon?
  • Double-click the entry for your CD player
  1. That said under the "device status".
  2. What would you say (at the bottom) under "use of the device.
  • Close the Properties window and Device Manager

  4. open my computer, right-click on the icon for your CD drive and select Properties

  • Is there a tab "recording"?
  • If there is a 'Recording' tab, click on it.  Is the box to "Enable the writing of CD on this drive" checked or unchecked?  (Do not change at this stage)

  I'm not very familiar with Media Center Edition.  In the past, when you copy files to a CD, how did you do?  You just drag files to the letter of the CD-ROM drive in Windows Explorer, or did you have to open an app?  If the latter, what application you use to copy files to a CD.

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• Hello, I have a 29.99 for 10 subscription ever images of months, but this month show that I have 0 left images?

  Hello, I have a 29.99 for 10 subscription ever images of months, but this month show that I have 0 left images?

  Hello

  The assignment of the image is added to your subscription renewal date.

  Your allocation of 29 March has been used & the following monthly allowance is added to your account on and around April 29.

  Additional images can be purchased at the excess price for your plan until then.

  Kind regards

  Bev

• How prevents you making hard disk image.

  I want to avoid making the hard drive disk image software.i image belongs to the marketing automation industry retail and have more then 1000 guests with the same equipment.
  some of our former employer do drive hard picture one of our client and software copy of sale to others.is it is a software or security with XP to stop this kind of piracy.
  concerning
  Syed Hussain Yes

  Hi sabsarh,

  If the hardware supports it, a basic input/output system (BIOS) password can be defined by preventing changes to the boot device prevents booting from removable media. Combined with physical security locks to prevent the hardware changes, it should help to prevent unauthorized access.

  You may need to contact the manufacturer or refer to the manual for assistance with the BIOS settings.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  You can contact Microsoft Support for assistance on the issue of piracy.

  Microsoft technical support

  Protect yourself against piracy

• problem with shaped text saved to hard disk

  I use a modified code of Macromedia to save the content of a text filed on the hard drive. See the code at the end.

  The code works fine, and a text file is saved in the specified hard disk location.

  The problem is that all the content of the text field appears in a very long line.

  The line breaks in the field text appears at all in the saved text file.

  for example:

  If the following is the content of the text filed on the stage:

  abcdef

  jhijklm

  nopqrst

  uvxwyz

  then the saved file is like: abcdefjhijklmnopqrstuvxwyz

  No line break happens! How can this be repaired?

  Thanks for your suggestions.

  HUMAN RESOURCES

  Here's the code *.

  ----------------------------------------------------------------------------------
  -This handler saves the contents of the field in a text file called "output.txt".
  -more written anything in the file "output.txt".
  ----------------------------------------------------------------------------------

  global myFile

  on mouseUp
  
  If objectP (myFile), then set myFile = 0 - Delete the instance if it already exists
  
  myFile = new (xtra "fileio") - create an instance of FileIO
  
  openFile (myFile, the moviePath & "output.txt", 0) - open the file with R/W access
  
  Delete (MyFile) - erases the file
  
  createFile (myFile, the moviePath & "output.txt) - creates the file again
  
  openFile (myFile, moviePath & "output.txt, 0)-open the file with R/W access
  
  mySaveString = member("input").text - puts the contents of the "input" field in the variable mySaveString
  
  writeString(myFile,mySaveString) - writes the text in the file
  
  closeFile(f) (myFile) - close the file
  
  myFile = 0 - has the instance
  
  end

  ******************

  If your problem is solved?

  In order to get the Manager/JS function to compile, go into a script member whose script is JavaScript. There is a drop down menu top left of the script pane that allows you to change that. For this reason, the JS function should go into a separate #movie with the script script

• access all information on the hard disk for all users.

  I tried to set up a link today from my new laptop computer Windows 7 my most top of desktop running vista.  The liaison program stated that the administrator on my old computer was only a temporary user.  I tried to set up the account as a permanent user without realizing that it would replace the current account.  I have now no access to programs from hard drive of the main user I was using.  I was wondering if there is anything I can do to access the hard disk with this user and import files?  I forgot almost all programs appear on the computer but open to anything.

  Hi kismet.

  1. What do you mean by link program?

  2. What have you tried to do?

  3. how many accounts do you currently on the computer and what are they?

  4. what happens when you try to access the files on the hard drive?

  It seems that you do not have permissions to access the files on the hard drive.

  I suggest that take you the files and folder try to access.

  To take ownership of a folder

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and then click the owner tab.

  (c) click on Edit. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) click on the name of the person you want to give to the property.

  (e) If you want that person to be the owner of the files and subfolders in this folder, select the check box Replace owner subcontainers and objects .

  (f) click OK.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Factory installation on a new hard disk Image

  The hard drive on my Dell Inspiron 530 has recently had problems starting intermittently, and I ordered a replacement drive to ensure that I swap try it before it goes belly up.  The new drive is empty and I want to load the factory top of old hard drive image.  Can someone give some advice on the best way to do it?  Y at - it a doc there to walk me through it step by step?  Thanks in advance...

  jrcallinan

  You need an imaging utility, similar to True Image Home 2011 either Migrate Easy 7.0

  http://www.Acronis.com/homecomputing/products/TrueImage/

  http://www.Acronis.com/homecomputing/products/MigrateEasy/

  If you buy the Seagate hard drive retail box version, a copy of Acronis should be included, it can be used only with their readers, or you can download it from the Web of Seagate website, you will also find that other hard drive manufacturers have their own free cloning software available.

  First, install the new drive as the secondary image, the exsisting C: / for her.

  Immediately stop the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  Bev.

• Windows 7 custom deployment of a Multi HARD Disk Image

  Hallo

  We have about 100 new jobs arriving (it's a college with network of course) and I send an image HDD for the seller
  in order to clone this HARD drive to each new computer, so when they come here they must be connected and powered
  and the image from HARD disk to look for to deploy.
  We have windows 7 Professional, we have customized it and syspreped Generlized + stop and removed the HARD drive.
  My question is, is the right way to do it?  last time we have to many computers got the "not authentic" and could not be activated with kms server.
  I remember reading about a specific procedure, you need to do before sending your image HDD for cloning but can't find it
  any help would be
  Thank you

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Satellite 300CDT: number of HARD disk - partitions show only 4 GB

  I have an old Satellite 300CDT, I can't support it appears not yet listed on the Toshiba site.
  I have added a new hard drive and bought a 40 GB drive, but it will only show 4 GB per partition.
  I want 2 partitions that I have and in fdisk I said 50% for each but it only shows 4GB each even though it says support big readers.
  I'm running Windows Me.
  Is it possible for an old laptop of this type to display the size of the hard drive.

  Thank you

  Hello

  Did you use the FAT32 or NTFS?
  I use partition Magic 8 to do and to manage the partitions on the HARD disk.
  In my opinion, you should try this program. I think that using the PM8 you will get the total size of the HARD drive.

• I have disk defragment now show that I have no free space left

  I try to Defrag. and cleaning disc once a week. I normally like 30% free space. After that I have the defragmentation. last week, he went to zero, all free space (white bar) became red. I have not downloaded anything. I tried to remove programs, which would total more than 15% free space mark. If I run it defrag goes to zero. Any thoughts?

  Hello

  Method 1:

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Try running the disk check on your system with the help of the link below.

  How to perform disk error checking in Windows XP: http://support.microsoft.com/kb/315265

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope this information is useful.

• my disk driver does not work or even showed that I have have I have the driver on my compyter

  on 'My computer', it shows same (on hard disk drivers) I have a driver cd, and when I put a CD looks like it's trying to work, but nothing happens.

  How to fix this?

  Hello

  Did you of recent changes to the computer?

  This problem may occur if one of the following scenarios is true:
   
  1. pilots of filter in the CD and the DVD storage stack are not migrated successfully to Windows 7.
   
  2. you uninstalled CD software that fails to withdraw properly in the registry.
   
  3. that you have installed a software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  I suggest you first click "Run now" article.
   
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If this does not work, manually follow the steps indicated below the articles.
   
  The CD drive or the DVD drive does not work as expected on a computer on which you updated for Windows Vista/7
  http://support.Microsoft.com/kb/929461

  Registry warning

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• access of the lost messages "sent" it is essential that I have again access to my messages as history affects future communications about a foreign nation

  Lost access "sent messages".

  It is essential that I have again access to my 'sent messages' as history impacts futuire communicatio about events in a foreign country. I have Hotmail through Qwest Communications.

  Since you are using Hotmail, you will need to repost your question in forum Windows Live Hotmail listed below that.
   http://windowslivehelp.com/product.aspx?ProductID=1

  In general, for help on Hotmail/Windows Live products please visit Windows Live Solution Center:
  http://www.windowslivehelp.com/

  Sincerely,

  Marilyn

• Windows 7 shows that I have 4 discs of additional withdrawal on my system. I don't. How can I remove these imaginary disks in the system?

  Don't know why they came on the system.  I want to just get rid of them.  Thank you.

  Additional removable disks may appear when you have one or more of the following, connected to your computer:

  -Camcorder
  -Cell phones, especially smart phone
  -MP3 players
  -new model printers - some come with media of the 'camera' slots to allow direct printing of photos.
  -Camera digital media card readers