Access rights don't get inherited on the children of the directory. Why?
I have the following problem:
on a pc from a colleague, a configuration that I built runs the following command
Cacls "WebsiteDir" / t/e/g ASPNET:F
This adds properly on behalf of the directory of Web sites on the Security tab.
But when I check the web.config file in that same directory there not this account under the Security tab.
I checked that the web.config file has the box checked for the inheritance of permissions.
When I go to the dir website and I go to the Security tab and make sure that the check box for "replace entries permissions for all child objects by the entries displayed here and that apply to child objects" then there also the correct permissions on the web.config. I can also set the permissions on the Web.config directly from the installation, but it means that I don't know what goes wrong. If I know what is the cause maybe I can also have a good solution in my configuration.
Does anyone know why the permissions may not be set in the web.config file
This problem does not exist on my pc or in my vmware in test environment.
BTW none of the files in this directory get these permissions, until Manuel solve this problem eventually.
Hello
The question you have posted will be well suited in the TechNet forums. Click on the link below.
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
Tags: Windows
Similar Questions
-
I don't get updates for the retina of my macbook pro 15 mid 2015 2.5 processors 16 g ram, last updated, I got was garage to April 8, may be there is no more updates at this time, but what made me think twice as more than one reader app have update to search for the app store When news, nothing happened and onedrive will not be updated, and this dose of update does not appear in the section updates in the app store app
any body can help?
That's what I have in the last few weeks
Make sure you have a good WiFi connection and are signed in iCloud / App Store
-
1. How can I get rid of the classic theme?-hating to the square of the tabs.
2. where is low toolbar that lets me know (such as to empty the trash on my Mac) where I am trying to go to a new page?Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
Why I don't get previews of the icon? (Mac OS)
Mac OS 10.7.5. Photoshop CC.
Everything is set accordingly:
Yet I only get generic file icons. No previews. Why?
You can find the only Photoshop CC file in this folder, all the others are files Photoshop CS6?
MacOS has a few bugs sometimes preventing him from properly build the thumbnails.
Sometimes reboot will solve sometimes erase operating system directory caches, and sometimes to do a clean installation of the operating system.
We have notified Apple of the problem, but have not yet heard any results on their part.
-
I don't get updates. The last was in September. What is the problem?
Only updates that I get are for Office 2007, which I don't have on my system. Tried several times but no luck. I need an easy solution short of reinstalling windows.
Hey Bright,
Please keep us updated.
Follow the suggestions below for a possible solution:
Method 1: You can follow the steps in the article and see if that does the trick.
You receive an error code "0 x 80246002" when you use Windows Update or Microsoft Update Web sites to install updates
http://support.Microsoft.com/kb/958056
Method 2: I recommend you to reset Windows Update components and check if the problem persists.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Hope this information is useful. If you need further assistance, please answer and we will be happy to help you.
-
I can't set the HDMI output as default device and I don't get sound from the HDMI output.
I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there. Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.
Windows Vista Home Premium SP2 64-bitwith the NVIDIA GeForce GTS 250 graphics cardOriginal title: audio HDMI cable no.I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there. Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.
Windows Vista Home Premium SP2 64-bitwith the NVIDIA GeForce GTS 250 graphics card==========================================================
The following article might be worth a visit:Windows Vista - HDTV: frequently asked questionshttp://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions
(See _ why don't I hear audio when I connect my computer to a HDTV) -
I don't get to use the global variable. Take a look in my form, please.
Hello.
I'm ashamed. I'm not able to use a base on the LiveCyle feature: Global Variable / object.
I have a textfield for the user to put your name. Then, the user must click at the base. His name and value must be of value to a global variable, then I would use this value in any form.
This look at my example I would use this value.
https://Acrobat.com/#d=k0YlC1MXEdVTh1g2TXAJxw
What is the error? I tried to put as a global variable, but it does not work.
PS: Call of the value using textfield (TextField.rawValue = TextField2.rawValue), it works fine, but I prefer to use the variable
Thank you very much.
Hi Rafael,.
I'm good thanks
I do not know if I understood the question, but I think you're asking if it is possible to have a field that displays the value of a global variable (i.e. the 'view' you refer to), which is updated automatically via scripts of calculation or similar to but not dependent on another event, such as 'click '.
In my view, using a linked across the object world is the only way, and you are right - it is certainly easier.
Please let me know if I've not understood the question
Thank you
Tim
-
my friend can't access to my wireless, I gave him the password why?
I gave him the password of the router, but does not always have access to my wireless
Hello
1. what exactly happens when you try to access wireless?
2. you get any error message?
3. you can access the Internet through connected?
4. what operating system is installed on the computer?
I suggest you to follow the steps from the link below and check if it helps.
Wi - Fi and in Windows network connection issues:
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsHope this information is useful.
-
Windows 8 don't get files from my mobile phone via bluetooth, why?
I have a Sony Ericsson WT13i mobile. It pairs with any windows/pc/laptop via Bluetooth very well except with WINDOWS 8! 'Add a device' using Bluetooth OK, but it does not appear in 'Start' also during reception of files - shown as sent on my mobile - this error appears:
Bluetooth file transfer is not complete
Windows was not able to transfer files
PLA Pla Pla Pla
To try again, click the arrow to the left.
P. S.
updated 1-driver and works well - or is it just that WINDOWS 8 says.
2 - I've set the startup type of service support of Bluetooth to "automatic".
3 - I deleted and added the device again.
4 - my laptop _Toshiba satellite L850-b411_ and the visibility of my mobile is set to 'Visible '.
5. I heard that many users Windows 8 has had the same problem because of the wrong windows drivers Bluetooth.
6 - my windows is in the Virgin order refresh/restore/reinstall/upgrade to windows update will be not useful.
Any help will be appreciated!
Hello
What I can suggest is to go to the screen, boot go to Search and type fsquirt. The window of Bluetooth file transfer . The next step will be as follows:
- Select send files (a list of Bluetooth devices is displayed).
- Select the device to send files and click Next.
- In the next window, click Browse to select the files to send, and then click Next.
Windows will attempt to send the file to the selected device. A message should appear on the device asking if you want to accept the transfer. Once the transfer is successful, a message appears saying "file transferred successfully" appears. Let us know how it goes.
Kind regards.
-
I'm implementing a collection on my desk to use the moble option. I am using Windows 7 and when I click the icon it shows the collection dialog box which is + collection guess to have a box to check called 'sync with lightroom for mobile' but he's not here. How do I rectify this?
You'll need-
1. the CC subscription plan photography. (Stand alone v6.5 provides mobile sync)
2. the sync works behind the plate of identity under the menus - click the menu drop down.
3. then you click on the icon of synchronization next to your standard collection in the collection library panel (and not a smart set)
-
I am running Mozilla Firefox under Windows 7 Ultimate 20.0.1.
I'm trying to import favorites from Internet Explorer 9.0.15.
If the bookmark has a subdirectory, I don't get any of the links in the subdirectory.It didn't happen on my other computers:
Internet Explorer 8 Windows XP Professional
Internet Explorer 9 on Windows 7 ProfessionalThis incomplete import sometimes for unknown reasons.
You can manually export your IE Favorites and then import them into Firefox by using an HTML file as intermediate format. This thread has the steps: only 1/3 of my imported IE Favorites. How can I move the rest?
It work?
-
Hi all
When I updated to 6.5 LR. on a captain El MAC, I got an LR error stopped and asked me to change file access rights. I did it but the problem remains.
I have change the law according to the recommended page.
My Mac is in the language of the French OS.
Who can help me, I'm stuck without the possibility to use LR on my MAC for 24 hours already
Thank you
Patrice
Hello Tanuesree,
problem solved. I've been away the ~/Library/adobe access.
Now it's working.
Thank you very much
Patrice
-
Original title: no update
I noticed that after I downloaded Visual Studio 2013 month or two before, I don't get any auto matic updated more?
Why?
I use:
* Windows 7 Ultimate
* eMachine
* Pentium (R) dual-Core processor T4400 2.20 GHz
* 32-bit
* Microsoft Windows
Version 6.1 (Build 760: Service Pack 1)This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers) -
Don't get daily business Family Safety report
Original title: have the user opens a session sent me
Hello
I don't get all of the daily activity of my children sent to me by e-mail. I have an Outlook account.
Hello
Have you checked if the activity report is turned on?
If it is already enabled, please disable and then enable the activity tracking settings. This process will update the configuration and we will know if it has no effect on the issue in the next report of activity that you will receive.
Here are the detailed steps:a. the account login parent in http://fss.live.com.
b. under the child's name, click change settings.
c. Select Activity reporting.
d. place a check next to disable the activity tracking.
e. click Save.
f. now, return to the same settings and tick turn on activity monitoring.
g. click Save.
If this does not help, you can refresh the parental control settings and check if it helps. Refresh the family safety filter to ensure that it uses the most up-to-date information.
How to update the family safety filter?
http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-filter-FAQ
Let us know if it helps. If the problem persists, we will be happy to help you.
-
Some fields in a form doesn't get presented with the XML - is - it a setting to toggle it?
I wouldn't consider myself to be an expert with Acrobat or LCD, but I am pretty familiar with PDF forms and have created some...
I edited recently a former, and now some fields don't get included in the XML which can be emailed...
Is there a setting somewhere that active / disabled individual to be included or excluded from the XML fields?
Is there anything else I should look at? I tried to change the name to make them all unique, but still no joy...
Have you checked the settings on the tab object-binding data binding?
Maybe you are looking for
-
Music - get all of a sudden ' this requires the library iCloud music. "
I am a subscriber of Apple's music. Today, 08/31/2016, I started music app on my iPhone and was invited to open a session. I don't know why, since I leave always connected. But I connect and then tried to download a song. I got the message "this re
-
Can not view the image url on Firefox I can on Chrome
I am trying to copy a set of images that have urls such as the following: http://www.Halldis.com/resources/apt_resource_1564_1272014118921.1 These images will display well on Chrome, but not Firefox, where I get a lot of funny characters. The site is
-
Just not upgraded for Windows 10, 7.1 Surround Sound no more functions
I use a Logitech G633 helmet, which is compatible with a 7.1 surround sound. Before moving to Windows 10, one worked perfectly well with Skype and my sound quality surround sound was crystal clear. After the upgrade to Windows 10, Skype does not use
-
I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please
-
Bike E 2nd Gen supports Bluetooth Aptx codec?
Hi all Does anyone know if the E bike (2nd generation) supports the Bluetooth Aptx codec? The official website of Aptx is not reliable for this info, because there are devices that I know support Aptx, but are not listed on this Web site. Does anyone