Access telephone IP SRP547W of line through Vlan VoIP Wifi No.

Similar Questions

• Red circle with a line through

  I look a my email, hit something on my keyboard and I had a red circle with a line through it on my email that I look one including all the others with the same subject / receiver. Now, emails are no longer there and I have not received all messages from this person either, at least not through Thunderbird. I don't know what I did. Any help is greatly appreciated.

  Thank you

  Mark

  See Menu (Alt + V) > discussions > ignored threads

  See https://support.mozilla.org/en-US/kb/ignore-threads

• I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help?

  I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help

  Try to drag the image to id web site (favicon) on the left side of the address bar, instead of the URL.

• Cannot use the button Delete, build, forward, or any box above. There is a black line through each box.

  There is a black line through deleting it, the answer, the next high school & page E-mail t button. It I cannot select any option. E-mail works fine in Internet Explorer. Please help find my e-mail options.

  It seems that the same problem has happened once with Gmail. The proposed solution can be seen here, although he did not have all the answers: override system colors

• Icon has a circle with a line through it, so I can't move the icon to dock... why? Fix > |?

  Icon of Firefox which is shown to go in my applications folder
  a circle with a line through it, which does not allow me to drag the icon
  in my dock for us opening and closing of browser... why? And how
  can I get rid of this circle?

  I deleted an earlier version of FFox so I hae no icon to open with.
  I get message that says Ffox can not open - please help.

  thx. weidner
  

  http://www.Mozilla.com/en-us/Firefox/4.0/system-requirements/
  
  Mozilla Firefox 4.0 does not support Mac PPC or versions prior to 10.5.

  For older Macs that are not considered supported in Firefox 4.0, try TenFourFox for PowerPC in performance Mac 10.4.11 and 10.5.8.
  
  http://www.floodgap.com/software/tenfourfox/

• Horizontal line through the taskbar

  Hi, I have a white horizontal line through my window in the task bar.  I too, was a piece of editing and left the computer for a half an hour approximately.  When I came back, all my video had disappeared, both in the project and the timeline.  I send you a picture of him.  This happened to someone else?

  Thank you

  Sally

  Everyone sees the same thing on the field of fuzzy time code.

  The good news is that it works fine even if it looks ugly.

  Some users have had loss of similar things to what you describe.

  Take a look at the events currently open to see if FCP X has moved their.

  Also check your Mac for any active automatic system power activity. e.g. energy, App Nap management.

  Al

• Why other users (family members) have access to my library of photos through account here on my Mac?

  Why and how other users (family members) on my iMac accounts have access to my library of photos, I don't want anyone to have access to my photos to accept through my account that I am the administrator?

  Also I don't want my children who have iPhones to access my accounts photos by user accounts here?

  Thank you community pls help.

  You share an iCloud account?

• on my removable drive e. the pictures on my media card all have lines through the pictures, I never understand was wrong before, I use windows 7 on my laptop nephews

  all images of this disc player seem to have several lines through them... even if they appear very well during the Preview on the camera with that I took photos!  HELP PLEASE!

  Hello
  This happens on all computers or only this one. It seems that one of two things happening. Either these pictures has not registered properly, or there is a problem with the format in which they were saved and Windows has trouble reading.

  You have another SD card, you can try with device photo/computer?

• all my icons in windows messenger have a diagonal red line through them

  red line through the messenger icons

  Did block all contacts? If this post answers your question, click mark as answer .

• Prints horizonal lines through white photos

  Photosmart C4780 Print/Scan/Copy

  HP Everyday Photo Paper using

  When printing photos, it puts white horizonal lines through the pictures.  Looks like shit.  How can I fix it?  I ran the diagnostic doctor and he says that the printer works fine.

  Any help will be appreciated.

  Jean

  Hello JeanBurton.

  Please check this document.

  See you soon!

• Cannot connect the switch Cisco Cisco SG300 - 28 p spend and traffic through VLANS

  Try to connect the Cisco SG300 - 28 p switch to another switch and proceed 2 VLANS between them.  Not doing any circuit.  If I connect a computer to the port on the SG300 - 28 p I can access the VLAN 2 and take a DHCP address. However, when I connect to another switch on the port and connect it to a port on another switch secondary I am unable to access VLAN 2 and pull an IP address.  I checked that the works of secondary switch (WS-C3560G-48PS-S) connected to the other 3500 s, but not this latest SG300 - 28 p.  Here's the configuration for both, I'm leaving areas that shouldn't matter and add if necessary.  Try to connect the SG300 - 28 p Port 26-WS-C3560 Port 1 port.  Once again, if I connect a computer to port 26 on the SG300 - 28 p I access the VLAN 2 as expected, but not when I connect to channel 2 on the secondary switch.

  Cisco SG300 - 28 p

  !
  interface vlan 1
  Internet name
  !
  interface vlan 2
  LAN name
  IP 172.20.5.11 255.255.0.0
  no ip address dhcp (this is the VLAN I'm moving)
  !
  interface vlan 3
  private name
  !
  interface vlan 4
  name of Nortel
  !
  interface vlan 101
  name Video_Project
  !
  interface gigabitethernet26
  Description VLAN2-ACCESS-CISCO3500
  switchport mode access
  switchport access vlan 2 (this goes to port 1 on the other Cisco 3500 switch to provide access 2 VLAN)

  Cisco 3500

  !
  interface Vlan1
  NATCO Internet description
  no ip address
  no ip route cache
  no ip mroute-cache
  !
  interface Vlan2
  NATCO LAN description
  IP 172.20.5.13 255.255.0.0
  no ip route cache
  no ip mroute-cache (this is the VLAN I'm moving)

  !
  interface Vlan3
  Description LHPrivate
  no ip address
  no ip route cache
  no ip mroute-cache
  !
  interface GigabitEthernet0/1
  switchport access vlan 2 (this is the port that I connect to the SG300 - 28 p)

  !
  interface GigabitEthernet0/2
  switchport access vlan 2 (this is the port I hang my computer to and trying to access VLAN 2 other switch)

  Hello

  Yes, STP is the problem here. As you can see on your release of the Cisco 3500 switch, port Gi0/1 is BKN (The FEW is a shortened form of "Broken").

  This is caused by an incompatibility of versions PLEASE used between the two switches. Small businesses (including series SG300) switches are use legacy STP or Rapid STP (your case), but uses templates to business (such as catalyst 3500) PVST + (each VLAN spanning tree version of STP).

  Two versions between group of switches are compatible only under certain conditions. Important condition is that the two switchports needs to use a VLAN 1, vlan access/native and not any other number VLAN.

  It is to make your communication work, you must:

  • disable the STP at least 3500 Cisco switch:
    • on overall global (Switch (config) # no vlan spanning tree 2)
    • or by the base interface (switch(config-if) # no vlan spanning tree 2)
  • change the configuration of your connection between two switches by following the path:
    • change the switchport trunk (trunk switchport mode) mode
    • do 1 VLAN as native vlan (vlan switchport trunk native 1)
    • Towing VLAN 2 as vlan tagged on that Stump (switchport trunk allow vlan add 2)

• 8703e blackBerry smartphones shows a circle with a line through it and box behind. Lights on. NEED HELP!

  My wife just got this BB and worked great, when all of a sudden there isa circle with a line through it and a box in the center of it with a cirle, square, and a triangle inside the box.  We tried to remove the battery, nothing works.  Spoke with someone at one of the section local stores and he said I need to download the Desktop Manager.  I did, but it does not connect to the phone.  Any suggestion?

  Click on the link

• BlackBerry 8800 Smartphone, symbol of the battery with a red line through it. Does not start. Help, please!

  I recently bought a 8800 and when I inserted a battery, I got was a battery symbol with a red line through it, on a dark screen.  I changed the batteries, tried to charge it via the USB port and a wall outlet without result.  I tried cleaning the contacts and tried to download t a new OS, but it does not recognize the phone when it is in reality.    I am at the end of my rope with this phone and can't figure out what else to do.  It is just gone? Please help me

  Clipboard?

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  It might not work. You should try a connection with JLCmder 20 to 25 times, as well with the battery and the battery.

  See what's happening.

• I have a red circle with a line through it on my need for speed Shift II in my Start menu, the game does not open

  Problem: I have a red circle with a line through it m need for Speed Shift II in my Start menu.   I have never had a red circle with a line pop up on any program in my Start menu, I wanted to know why it happened and how to fix it. The game accepts updates in the form of 'Add packs' of special vehicles in the original site via the EA download manager sports. So I guess that the game is installed correctly, but the game will not open and run at all, not from the start menu, or by clicking the desktop icon. Any help learn more about the red circle with a line about my program and what to do in case it happens again.

  Recently, I installed my Windows 7 Ultimate OS on a SSD which had been replaced because of a total failure of the car. I've updated the operating system with all

  latest updated windows and the updates of my video card, motherboard, HHD and SSD updated; Thus, all the hardware and software are up to date.

  I was going to restore the disk using last good upward from the orginal SSD before he died a month or two ago. So I think this will probably fix my need for speed II problem, but since it's the first time I've ever seen this problem with a program I would like to know how to cope.

  Any help would be greatly appreciated,

  Take care. Skyraider33

  I've never seen what you describe in the Start Menu, either

  You have a new installation of Windows on your new SSD, Yes? If the game is on another HARD disk,
  is that what you did re - install the game after installing the new Windows?
  Otherwise try to reinstall the game and origin. He would register
  entries, both in the previous installation of Windows.

  If this does not help forums EA would probably be a better place to find out if the
  mods are the source of the problem.

• Access to the Service of maintenance through Javascript

  Hey guys,.

  Had a problem with access to the service of maintenance through Javascript.

  Let's start first of all, here's the section of code:

  **********************

  var objXMLHttpRequest = new XMLHttpRequest();

  objXMLHttpRequest.open ("POST", "http://localhost:8020/determinations-server/interview/soap/10.4/OPA_IS", false); Point of Service endpoints, synchronous method

  " package of var = ' < soapenv:Envelope xmlns:soapenv = ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:typ =" " http://Oracle.com/determinations/Server/interview/OPA_IS/types ">\

  < soapenv:Body >.

  < typ:open - session-request / >.

  < / soapenv:Body >.

  < / soapenv:Envelope > ';

  
  

  objXMLHttpRequest.send (packet);

  
  

  **********************

  The ODS with the relevant innterview service has been deployed and I can test this very well through SoapUI. He returned with the correct answer in this casting the Session ID for the new session of the OPA.

  When I run the present thanks to my JavaScript code, I get the following error in my log:

  com.oracle.determinations.server.exceptions.InvalidActionException: no action for 'null' does exist in the service 'odsInterviewService104 '.

  Thus, it seems that it does not find "OpenSession" action that is needed.

  My question is: How to indicate the type of action in my SOAP package?

  I ran across the ODS code and I can see what is causing the error, but everything I try, I can't seem to be able to add action to resolve.

  Kind regards

  Evert

  OK, that is now resolved. Added action and settled the question of calls cross-domain that came after that.

  Everything works now.

  Evert