access to the database of client computers

Similar Questions

• Problem: Access to the database.

  Hello.

  I have a problem with my NI Multisim 12 (Student Edition). It installs correctly and correct registry also, but when I run the program it displays these messages

  "Problem: access to the database."

  The data are not available. Functions using the database will be unavailable. »

  And similarly for the database and database user.

  In the end, it shows this message:

  "Multisim has detected that the main database is not on the current user. Reinstall the program from the original media. »

  I have the original of 2012 Labview and Multisim 11 (from a myDaq) media.
  After that, I can place any component because the program cannot access data bases. I can open previous designs, but it is not properly simulate.

  I am the only user of the computer, and I am the administrator.
  I have a 64-bit Win7 with Core 2Duo 3 GHz.
  I recently installed Labview 2012, which includes this software, so I uninstalled previous Multisim.

  On the same computer without any problem, I used Mutisim 11. I tried to reinstall Mutisim 11, Mutisim 12, delete windows registry, remove files after installation, giving permission for all files and nothing works. Whenever I have reinstall Multisim it displays these messages.

  Please, help me!
  Any help, or anyone with this problem or similar, let me know also.

  Thank you!!!

  Once again, many thanks. I solved the problem just now. I need to change the windows registry, following the instructions in the link. Thank you
  PD: Do not use Ultralibrarian unless you have a non-free license! hehe.

• Windows asks for a password when you try to access to the "view work group computers."

  We are on a network.  Main computer, that we can access through the receptionist connect you and access shared files on this computer.  Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers."  We tried to use its password.  However, the shared files are still not accessible.

  Hello

  1. what happens when you enter the password?

  2. how many computers are connected to this working group?

  Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  I hope this helps!

• ODAC 12 c Release 3 (12.1.0.2) do support the access to the database to Oracle 10 g Release 2 or later?

  Hi ODP.NET Experts.

  ODAC 12 c Release 3 (12.1.0.2) ONLY does support the access to the database to Oracle 10 g Release 2 or later?

  
  

  It does not mean that this will not work for versions earlier before Oracle Database 10g Release 2?

  Thank you and best regards,

  Alan

  Hi Alan,

  Yes, it took out RDBMS version 10.2.0.2.0 or superior. Please see below for recommended and supported configurations document

  Supported by Oracle Data Provider (Doc ID 726240.1) configurations for .NET (ODP)

  Thank you

  Indana

• How to get access to the database

  Hello

  I am trying to find a way to access the data base (not the customer database) business catalyst is there a way to do it?

  Or can I add my own database to BusinessCatalyst.

  I need to get access to the database because we have a contract with a company which provids us with news items every working day

  and they want to connect there system to the database.

  Danny gr.

  Hey Danny,

  The system does not work like that. There is no database that you can access in this sense. If you want to create news on your site yourself build a web application or to use the integrated blog.

• Restrict access to the database for the upgrade of the application

  Hi all

  We're performing an upgrade of the application that requires us to perform a lot of scripts on our server Oracle EE 11.2.0.4.

  This specific database has around a website based end and a front end based client, but it is also accessible on the network through TNS SQLPLUS/Toad, ODBC, JDBC etc.

  For obvious reasons, the upgrade, I want to make sure that no one else that the DBA can access the database. Usually change us the listening port of 1521 to let say 1544. This prevents all access.

  But now we run in a physical Data Guard with two Standby configuration so I don't really want to play with the listener ports. The upgrade must propagate changes from primary to Standby. I could interrupt them temporarily, but I would like to avoid that if possible.

  Another way I thought would work was to stop the database and open it in restricted mode. But before that, I would need to grant the privilege of the Session to RESTRICT all users upgrade scripts using (around 5 users).

  This approach using the restricted mode seems reasonable?

  Other opinions would be much appreciated.

  Thank you

  This is exactly what restricted session is for. You can do online and then kill a session is currently connected. No need to stop:

  orclz > alter system enable restricted session;

  Modified system.

  orclz > change system disable restricted session;

  Modified system.

  orclz >

• customer access to the database problem.

  Hello
  I created an application using MDW. I get the Client to database created.but I donno how to access tables on the client computer by using the command prompt. I just want to see if these tables have all the data. So please tell me the Solution.
  
  Published by: user10797477 on January 28, 2009 06:47

  depends on the platform of the client

  for windows
  system of mSQL /@polite:_

  for windows mobile you have msql executable (and libraries) in the SDK if it is not already there and then run just so and a GUI will appear for you to select the database and enter passwords etc.

• Access to the database/schema to another server...

  Hello - I have a need that will require me to access additional information about a schema on a server that is different from what my APEX installation runs on (IE 3rd part of the data that is not part of the inherent schema that accesses the APEX)...
  
  My APEX server running version 3.2.1.00.11 on top of oracle 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production. We will call this server "A".
  
  The target server is currently an Oracle server, but will eventually migrate to a Teradata installation (no - I have no word to say in the matter!). We will call this server 'B '. No idea what versions in both cases.
  
  I understand that if I needed to access different patterns on the same server (IE Server A) it would be easy enough to do using grant statements.
  
  Also, I understand that to access a schema on server B, I could use a DBLink to do.
  
  My questions are:
  
  (1) oracle allow a DBLink to teradata? I found the following thread that seems to indicate that it is possible (or at least used to be - don't know if it's still a valid configuration) Re: Teradata to Oracle connection
  
  (2) is there another way to make this available external data source? A tech in our team 'Architecture COMPUTING"said DBLinks are not recommended or a best practice. He proposed adding the data source 'directly '?
  
  This thread (add multiple schemas in a workspace seems to speak of adding multiple schemas to a workspace, but I do not have access to this part of our oracle server (I'm only a workspace administration).)
  
  (3) if I create a view that accesses the tables through the DBLink to Server B when it comes to Oracle, and then update the DBLink to point to the new teradata server during the migration happens - it will break anything within the APEX?
  
  My hypothesis is that the table names are the same concerns only APEX that the view is valid and not what fuels the view.
  
  
  The rationale against using DBLinks gave me was that "it is not sensible for APEX down to the oracle database (its native underlying server/schema) to cross to another server and return to the oracle database that then went up to the APEX." It makes more sense for APEX to go straight to the other source of data. Normally, I would say that they (Apex/infrastructure) are the same server so it does not really matter that he might have to go through additional 1 'service' or 'interface', but this area is not my specialty.
  
  Also - I think that technically speaking our APEX service is already separated from its native schema/data on different servers (for load balancing), so in this case really maybe a middle Server Getting (IE Server APEX A-> native schema/data of the server where the DBLink might be-> server B) do an unnecessary extra jump (APEX Server A)-> server B. Note : I am sure that our architect does not know that this is the case, then it is not part of its raison d'etre.
  
  Thoughts?
  
  Thank you!
  Jim

  (1) there is a wide variety of databases that you can access from Oracle using the links to the db. The main purpose of a db link must provide connectivity between databases that are not consistent with the use of a certain type of driver or translator. Some databases provide native connectivity with other thing than their own products.

  (2) I would ask another dba from this source that he or she recommends, and if he or she has all the documentation. The long and short of it is (as I explained above) few providers of database provides native support for other database engines, which is needed for the kind of "direct connection" implies that person. My suspicion is that this person is an ODBC user and is equivalent to the use of ODBC drivers with "direct connection", which is far from accurate. ODBC only provides a generic interface to a database, at the expense of speed, functionality and efficiency thanks to the translation of the command and overhead.

  (3) oracle generally doesn't care about the back end of a connection to a different database and neither does APEX. As long as you can build a database to the database in question, shouldn't you have any problems ask these data, although only in a reduced performance due to air travel, networking, drivers, etc.

  Really, APEX is intended to be run against and integrates better with Oracle databases. If your main data is on another platform, APEX may not be the best solution for your needs.

• Read only access to the database

  Hi all
  
  I am unable to give read-only access to a newly created in the Oracle database user. I grant only read permission to the user, but the problem, it's that this user is able to delete data from a table or schema.
  
  Must only give 'Read only' access to the user who will be sql query for any table, schema, etc.
  
  
  I followed the steps.
  
  1 creation of the user
  
  2 granted suite privilege
  
  CREATE SESSION
  
  SELECT_ANY_TABLE;
  
  SELECT_ANY_DICTIONARY
  
  Please guide on the same.

  user8934591 wrote:
  Hello

  I created the user "MFC".

  and granted 'create the Session '.

  Thank you and best regards,

  Fine. But I asked PUBLIC.

• No access in the database in the part without head

  Hi Experts,

  I use Sqlite database App. App works very well in the foreground.

  But when trying to access the same database in part without a head it is said table is not output.

  Please suggest where I am absent...

  Thank you & best regards

  We use the same database in both headless and UI without problems
  (other than those described in http://supportforums.blackberry.com/t5/Native-Development/Using-sqlite-database-from-headless-and-ma...

  You may click on the link above and share your application if it is different?

• How to give users access to the database schema?

  I have the following databases:
  
  Running test of Oracle9i Enterprise Edition Release 9.2.0.6.0
  Production is currently running Oracle9i Enterprise Edition Release 9.2.0.7.0
  
  I created a user at the same time and on the production side, it works fine, but on the side of test, I get ORA-1017: name of user and password invalid. connection refused when I try to connect via my web application or when I try through sql more is not log to the side test but does for the Pb of the production.
  
  How can I compare two users?
  During the creation of my table, procedure, etc. scripts, I have granted access this even sure if the user has rights to the tables and other objects.
  
  There is another main user account that is able to do everything that I need so I know it's possible, but need me something to allow my new user to connect.
  
  Thanks for any help you can give me.
  
  Published by: jerry8989 on March 16, 2012 08:10

  jerry8989 wrote:
  I have the following databases:

  Running test of Oracle9i Enterprise Edition Release 9.2.0.6.0
  Production is currently running Oracle9i Enterprise Edition Release 9.2.0.7.0

  I created a user at the same time and on the production side, it works fine, but on the side of test, I get ORA-1017: name of user and password invalid. connection refused when I try to connect via my web application or when I try through sql more is not log to the side test but does for the Pb of the production.

  How can I compare two users?
  During the creation of my table, procedure, etc. scripts, I have granted access this even sure if the user has rights to the tables and other objects.

  There is another main user account that is able to do everything that I need so I know it's possible, but need me something to allow my new user to connect.

  Thanks for any help you can give me.

  Published by: jerry8989 on March 16, 2012 08:10

  "ORA-1017: name of user and password invalid; connection refused '.

  Oracle is too easy to lie about it. It has noting to do with what privileges you have given to the user. There is never far enough to worry about privileges. Either you provide a user name does not exist, or you provide the wrong password for this user name. Period.

• Access to the database 7

  Hello all, im trying to find the best way to query a base 7i, wich driver should I use on a linux machine.
  I would prefer to use something low like C, but it has beem difficult to find a solution for me.
  
  Any help?
  
  Published by: user9532594 on 19/Dec/2008 17:08

  Ok. Looks like you have some problems.

  The first version of the client available for public download Oracle is 9.2, but this version does not support connections to an Oracle 7 database. You may be able to get a previous Oracle 9.0.1 or client supports, assuming that you have a valid support contract, but it may take a bit of work according to this old software Oracle happens to have on hand.

  Then you have the problem of getting a version of the Oracle client that is supported by what version of linux you are using. Since 9.0.1 has not been supported in some time, you will probably need an older version of linux to run.

  OCILIB does not seem to have been tested against an Oracle 7 database, at least according to the documentation I can find. You can always write pure OIC and OIC API tends to be fairly complex. Not necessarily the type of API you would like to start with. What kind of verification you are trying to implement?

  Justin

• No access to the hyper-v client

  I created a hyper-V host 2008 R2 64 bit. I have two 2008 R2 hyper-v client running. When I bring the second VM, I have no connectivity to the second computer and cannot ping the client. The host and the computer two virtual receive a static IP address.

  MZ

  Server are better asking questions here

• How can I request to have access to the database of the Microsoft Flight Simulator?

  I develop an application that works well with the full data base land provided in Microsoft Flight Simulator.  How can I access?

  Hello, Ronnie,.

  Thanks for posting your query in Microsoft Community.

  As a developer, I suggest that you re - ask your question in the MSDN forum rather than on this forum. MSDN is watched by other developers who would more than likely be able to help.
  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues

  Hope this information is useful.

• Download file from the database server, through application server.

  Nice day

  I use Jdeveloper 11.1.2.3.0.

  I have a requirement to download a file that already exists on the database server Directory. Now my current scenario is that user is connected to the application server, and the user has no direct access to the database server.  I drew a diagram of my requirement as:

  
  

  

  
  

  I get a way to do this. Please suggest.

  
  

  Best regards,

  Julien

  The session does not expire if you are streaming data from the application to the client. However, you will need to manage the data sent over the network, because it can make the very slow network if you send this amount of data at high speeds on the network and then to the customer. This connection between client and server is the biggest problem, because bandwidth is usually small. Think about downloading software by one side oracle (for example 1 GB), this takes time and is prone to errors.

  We did something similar by transferring the data from the database (in our case, it has been stored in a BLOB) on a dedicated server with a server web apache on it. Then, we send a link to the client, which then uses the link to get the special file server data.

  The advantage is that you don't have to code the transfer of huge files in the application of the adf but can already use ready to use of software (balancing bandwidth and the recovery of a broken download).

  Timo