Problem: Access to the database.

Similar Questions

• ODAC 12 c Release 3 (12.1.0.2) do support the access to the database to Oracle 10 g Release 2 or later?

  Hi ODP.NET Experts.

  ODAC 12 c Release 3 (12.1.0.2) ONLY does support the access to the database to Oracle 10 g Release 2 or later?

  
  

  It does not mean that this will not work for versions earlier before Oracle Database 10g Release 2?

  Thank you and best regards,

  Alan

  Hi Alan,

  Yes, it took out RDBMS version 10.2.0.2.0 or superior. Please see below for recommended and supported configurations document

  Supported by Oracle Data Provider (Doc ID 726240.1) configurations for .NET (ODP)

  Thank you

  Indana

• How to get access to the database

  Hello

  I am trying to find a way to access the data base (not the customer database) business catalyst is there a way to do it?

  Or can I add my own database to BusinessCatalyst.

  I need to get access to the database because we have a contract with a company which provids us with news items every working day

  and they want to connect there system to the database.

  Danny gr.

  Hey Danny,

  The system does not work like that. There is no database that you can access in this sense. If you want to create news on your site yourself build a web application or to use the integrated blog.

• access to the database of client computers

  Hi all
  
  I installed oracle 10g on windows XP, my computer was not on a network, when I was installing, so I access enterprise manager and isqlplus with "http://localhost:5560 / isqlplus" and "http://localhost:5500 / em, but now I want to place on a network so that other computers can access to the database is possible if yes, how do I go about this?

  Laurette wrote:
  Hi all

  I installed oracle 10g on windows XP, my computer was not on a network, when I installed, so I have access to enterprise manager and isqlplus with "http://localhost:5560 / isqlplus'and'http://localhost:5500 / em , but now I want to place on a network so that other computers can access to the database is possible if yes, how do I go about this?"

  You can access the server remotely by using the ip address? If Yes, then change * localhost * to the ip address of this server and do not forget to start receiving

• customer access to the database problem.

  Hello
  I created an application using MDW. I get the Client to database created.but I donno how to access tables on the client computer by using the command prompt. I just want to see if these tables have all the data. So please tell me the Solution.
  
  Published by: user10797477 on January 28, 2009 06:47

  depends on the platform of the client

  for windows
  system of mSQL /@polite:_

  for windows mobile you have msql executable (and libraries) in the SDK if it is not already there and then run just so and a GUI will appear for you to select the database and enter passwords etc.

• Problems connecting to the database msaccess 32 bit on 64 bit 11G

  Here's the question:

  I have a database to 9i (32-bit windows) with a connection hsodbc to an old one to an Access database so once the schema can see and copy data from an access database has said, everything works fine.

  I'm about to move the 64 bit 11.2.0.3 on windows 2008 server 64-bit database, database is migrated and tested ok.

  The problem comes from the connection dg4odbc, I created the AS400 database connections and they are ok, but I set up an ODBC for the access database, using the 32-bit ODBC interface as MS recommends, but I always get this error message:

  ERROR on line 1:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  ORA-02063: preceding 2 lines of RADERDB

  According to MS technet, it is do not use the c:\Windows\SysWOW64\odbcad32.exe to set up the ODBC connection, but I used only executable, when I use the ordinary 64-bit ODBC admin I can't even see msaccess drivers first.

  The funny thing is, when I point the tnsnames.ora on the old server 9i entry, it uses the ODBC connection and then the dblink 11G and then works fine. However, it is a band-aid solution and I want to get everything works from the new production database server.

  Any suggestions?

  Thanks in advance...

  The message means you are using a 32-bit with a 64-bit program ODBC driver. It does not work. If you want to connect with the 64-bit DG4ODBC, you must use a 64-bit ODBC driver. A package is available on the Microsoft Technet site (AccessDatabaseEngine_x64 - http://www.microsoft.com/en-gb/download/details.aspx?id=13255 ) that ships the drivers ODBC 64-bit for their Excel/Access programs.

  Please note that product installation gateway 32-bit on Windows 64-bit is NOT supported.

  -Klaus

• Access to the database/schema to another server...

  Hello - I have a need that will require me to access additional information about a schema on a server that is different from what my APEX installation runs on (IE 3rd part of the data that is not part of the inherent schema that accesses the APEX)...
  
  My APEX server running version 3.2.1.00.11 on top of oracle 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production. We will call this server "A".
  
  The target server is currently an Oracle server, but will eventually migrate to a Teradata installation (no - I have no word to say in the matter!). We will call this server 'B '. No idea what versions in both cases.
  
  I understand that if I needed to access different patterns on the same server (IE Server A) it would be easy enough to do using grant statements.
  
  Also, I understand that to access a schema on server B, I could use a DBLink to do.
  
  My questions are:
  
  (1) oracle allow a DBLink to teradata? I found the following thread that seems to indicate that it is possible (or at least used to be - don't know if it's still a valid configuration) Re: Teradata to Oracle connection
  
  (2) is there another way to make this available external data source? A tech in our team 'Architecture COMPUTING"said DBLinks are not recommended or a best practice. He proposed adding the data source 'directly '?
  
  This thread (add multiple schemas in a workspace seems to speak of adding multiple schemas to a workspace, but I do not have access to this part of our oracle server (I'm only a workspace administration).)
  
  (3) if I create a view that accesses the tables through the DBLink to Server B when it comes to Oracle, and then update the DBLink to point to the new teradata server during the migration happens - it will break anything within the APEX?
  
  My hypothesis is that the table names are the same concerns only APEX that the view is valid and not what fuels the view.
  
  
  The rationale against using DBLinks gave me was that "it is not sensible for APEX down to the oracle database (its native underlying server/schema) to cross to another server and return to the oracle database that then went up to the APEX." It makes more sense for APEX to go straight to the other source of data. Normally, I would say that they (Apex/infrastructure) are the same server so it does not really matter that he might have to go through additional 1 'service' or 'interface', but this area is not my specialty.
  
  Also - I think that technically speaking our APEX service is already separated from its native schema/data on different servers (for load balancing), so in this case really maybe a middle Server Getting (IE Server APEX A-> native schema/data of the server where the DBLink might be-> server B) do an unnecessary extra jump (APEX Server A)-> server B. Note : I am sure that our architect does not know that this is the case, then it is not part of its raison d'etre.
  
  Thoughts?
  
  Thank you!
  Jim

  (1) there is a wide variety of databases that you can access from Oracle using the links to the db. The main purpose of a db link must provide connectivity between databases that are not consistent with the use of a certain type of driver or translator. Some databases provide native connectivity with other thing than their own products.

  (2) I would ask another dba from this source that he or she recommends, and if he or she has all the documentation. The long and short of it is (as I explained above) few providers of database provides native support for other database engines, which is needed for the kind of "direct connection" implies that person. My suspicion is that this person is an ODBC user and is equivalent to the use of ODBC drivers with "direct connection", which is far from accurate. ODBC only provides a generic interface to a database, at the expense of speed, functionality and efficiency thanks to the translation of the command and overhead.

  (3) oracle generally doesn't care about the back end of a connection to a different database and neither does APEX. As long as you can build a database to the database in question, shouldn't you have any problems ask these data, although only in a reduced performance due to air travel, networking, drivers, etc.

  Really, APEX is intended to be run against and integrates better with Oracle databases. If your main data is on another platform, APEX may not be the best solution for your needs.

• Read only access to the database

  Hi all
  
  I am unable to give read-only access to a newly created in the Oracle database user. I grant only read permission to the user, but the problem, it's that this user is able to delete data from a table or schema.
  
  Must only give 'Read only' access to the user who will be sql query for any table, schema, etc.
  
  
  I followed the steps.
  
  1 creation of the user
  
  2 granted suite privilege
  
  CREATE SESSION
  
  SELECT_ANY_TABLE;
  
  SELECT_ANY_DICTIONARY
  
  Please guide on the same.

  user8934591 wrote:
  Hello

  I created the user "MFC".

  and granted 'create the Session '.

  Thank you and best regards,

  Fine. But I asked PUBLIC.

• Restrict access to the database for the upgrade of the application

  Hi all

  We're performing an upgrade of the application that requires us to perform a lot of scripts on our server Oracle EE 11.2.0.4.

  This specific database has around a website based end and a front end based client, but it is also accessible on the network through TNS SQLPLUS/Toad, ODBC, JDBC etc.

  For obvious reasons, the upgrade, I want to make sure that no one else that the DBA can access the database. Usually change us the listening port of 1521 to let say 1544. This prevents all access.

  But now we run in a physical Data Guard with two Standby configuration so I don't really want to play with the listener ports. The upgrade must propagate changes from primary to Standby. I could interrupt them temporarily, but I would like to avoid that if possible.

  Another way I thought would work was to stop the database and open it in restricted mode. But before that, I would need to grant the privilege of the Session to RESTRICT all users upgrade scripts using (around 5 users).

  This approach using the restricted mode seems reasonable?

  Other opinions would be much appreciated.

  Thank you

  This is exactly what restricted session is for. You can do online and then kill a session is currently connected. No need to stop:

  orclz > alter system enable restricted session;

  Modified system.

  orclz > change system disable restricted session;

  Modified system.

  orclz >

• Problem to start the database console

  Hi guys...
  I have installed oracle 11 g release 2 in Ubuntu 9.10
  I need to start dbconsole but, the result is like this:
  
  ORACLE_HOME=/U01/app/Oracle/product/11.2.0/dbhome_1
  ORACLE_SID = archbase
  
  THE DATABASE HOMEPAGE
  . / emctl start dbconsole
  ORACLE_UNQNAME environment variable
  
  
  Oracle@Dede-PC: / u01/app/oracle/product/11.2.0/dbhome_1/bin$. / emctl start dbconsole
  ulimit: 25: wrong number
  ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.
  
  SQL > startup
  ORA-01078: failure in the treatment of system settings
  LRM-00109: could not open the parameter file ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/initarchbase.ora'
  
  
  SQL > alter database open;
  change the database open
  *
  ERROR on line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session IDs: serial number 0: 0
  
  
  SQL > show parameter db_unique_name;
  ORA-01034: ORACLE not available
  Process ID: 0
  Session IDs: serial number 0: 0
  
  Help me please, how to solve this problem step by step.
  
  Published by: [email protected] on February 26, 2010 19:02

  When everything has failed, read the Fine Manual

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e10840/pre_install.htm#i1011717

• Access to the database 7

  Hello all, im trying to find the best way to query a base 7i, wich driver should I use on a linux machine.
  I would prefer to use something low like C, but it has beem difficult to find a solution for me.
  
  Any help?
  
  Published by: user9532594 on 19/Dec/2008 17:08

  Ok. Looks like you have some problems.

  The first version of the client available for public download Oracle is 9.2, but this version does not support connections to an Oracle 7 database. You may be able to get a previous Oracle 9.0.1 or client supports, assuming that you have a valid support contract, but it may take a bit of work according to this old software Oracle happens to have on hand.

  Then you have the problem of getting a version of the Oracle client that is supported by what version of linux you are using. Since 9.0.1 has not been supported in some time, you will probably need an older version of linux to run.

  OCILIB does not seem to have been tested against an Oracle 7 database, at least according to the documentation I can find. You can always write pure OIC and OIC API tends to be fairly complex. Not necessarily the type of API you would like to start with. What kind of verification you are trying to implement?

  Justin

• Problem connecting to the database

  I installed 10.2 of the database under vista.
  
  I can connect to the database using the DBconsole.
  
  I can connect when I say, sqlplus "virtue sysdba".
  
  But I have the problem when I say, sqlplus sys@ecentric as sysdba
  He lifts the ORA-12514 error message: TNS:listener is not currently of service requested in connect
  descriptor of
  
  Kindly tell me where I'm wrong.
  
  Listener:
  
  ECENTRIC =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.x.xxx) (PORT = 1521))
  )
  )
  
  SID_LIST_ECENTRIC =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  TNSnames.ora
  
  ECENTRIC =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.x.xxx) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = ecentric)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  SQLNET.ora
  
  SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias ECENTRIC
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.3.0 - Production
  Start date 26 - AUG - 2008 12:12:20
  Uptime 0 days 1 hour 0 minutes 56 seconds
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  Listener log file C:\oracle\product\10.2.0\db_1\network\log\ecentric.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xxx.x.xxx) (PORT = 1521)))
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'ecentric.rnhub.com' has 1 instance (s).
  Instance "ecentric" READY State, has 1 operation for this service...
  Service 'ecentricXDB.rnhub.com' has 1 instance (s).
  Instance "ecentric" READY State, has 1 operation for this service...
  Service 'ecentric_XPT.rnhub.com' has 1 instance (s).
  Instance "ecentric" READY State, has 1 operation for this service...
  The command completed successfully

  TNSnames.ora
  (SERVICE_NAME = ecentric)

  Use the fully qualified name

  ecentric.rnhub.com

• problem connecting to the database (master repository)

  Hello

  I am a beginner ODI.

  J "tried to connect to oracle 11g pay do the test. But my connection is not always valid.

  Is there a driver to install for ODI 11.1.7 connection to in to the database?

  Hello

  1.) first create a schema of Master_repo and work_repo your oracle database (or you can create a single dev_odi_schema for the master repository and work)

  (2.) in ODI, create master repository using schema Master_repo

  File---> New---> master repository Wizard

  3.) of files in ODI---> New---> create a new ODI repository connection.

  4.) now connect with newly created connection of ODI

  5.) navigator in topology, there are referential tab where you can create the repository to work.

  6.) create connection to repository work. and you can work in it.

  ODI11g: Creating and connecting to ODI Master and repositories work

  Let us know

  Thank you

• problem connecting to the database using dbclient

  Can someone help to solve the following question
  
  The following error occurred when connecting to the database when connecting dbclient to the database on linux from windows
  . TNS dbclient names has been configured with the SID and IP address of the machine from database
  
  ERROR:
  ORA-12560: TNS:protocol adapter error

  Could you share your tnsnames.ora file

  And refer to this topic

  http://forums.Oracle.com/forums/thread.jspa?MessageID=9142058�

• No access in the database in the part without head

  Hi Experts,

  I use Sqlite database App. App works very well in the foreground.

  But when trying to access the same database in part without a head it is said table is not output.

  Please suggest where I am absent...

  Thank you & best regards

  We use the same database in both headless and UI without problems
  (other than those described in http://supportforums.blackberry.com/t5/Native-Development/Using-sqlite-database-from-headless-and-ma...

  You may click on the link above and share your application if it is different?