access to the router, by default admin admin password?

Similar Questions

• HTTPS access to the router does not work with Firefox 33.0

  HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
  Thank you.

  Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?

• Failure of firmware WRT54G leaving no access to the router config

  I have a WRT54G Router.  Running Vista SP2 64 bit on a laptop computer connected to the router.  When I tried to upgrade the firmware I'm connected wireless.  (I know, please just think it is but do not type it)  During the upgrade, disconnected from the Internet and the upgrade has failed.  I connect right now wireless using someones unsecured network.  I tried to update the firmware to 8.00.7.  Since then, I am unable to access the router config using IP 192.168.1.1.  I read so many posts that I can handle it.  I checked and this is the IP address on display in Vista, (network & sharing, view the State, properties) however I cannot ping as intellectual property.  It expires every time.  I did all resets (10 seconds up to 1 minute) on the router and the power of the cycle etc.  Nothing.  I downloaded the firmware utility and I get a message error every time that it is impossible to get responses from the server.  I tried my password, I think it went due to all the resets, and use admin as password.  I disabled my firewall.  I have Network Magic and when I checked the internet access control it says I am able to do.  Is there a way to disable Network Magic?  May this be the cause?  When this all started, I got my own internet connetion.  I am moving so I unplugged my internet service.  Because I'm just trying to connect to the router locally, should I really to have a live internet connection?  Help, please!  I don't want to buy a new router.  It has been very reliable.  If I don't buy something again, you can recommend something just as reliable.

  There have been 2 or 3 times where it looked as if I would be able to connect to config interface and the basic screen firsrt of loads with minimal data and not of clickable links to allow me to change the screens.  The '&' from one of the links that are supposed to appear but do not, is the only thing that appears in this field and if I click it, I either an error in IE that it can not connect, or, it takes me to the screen of Ports with minimal data and I can't move forward from there.  In the upper right corner of the screen, it shows that the firmware version is 8.00.7.  ?????

  P.S. Obviously, I only am not computer savvy very so excuse me if I'm missing what is obvious.

  Kevj,

  Thank you for your support.  Thank you to tell me that TFTP is tricky because I would have just given up.  Imust have tried 15 times without success yesterday.  I have run this morning.  Try first worked.  Go figure!

  Thanks again,

  Steve

• EA6700 - could not get access to the router - hangs forever

  I hope really I can get help from som here, because this time Iom stuck.

  Just today, I have problems with my router connection.

  I use 12 IE, Firefox or Chrome. Normally, either would work.

  But now it seems that iff the router is not responding (but it is) - all web access works well - and I'm just not passed on to the GUI login.

  In Firefox, I was always able to get forwarded to the router, even if the certificate was not valid by adding an exception, but now it does not work.

  I get the following "error" messages:

  
  

• E8350 in Bridge mode allow me access to the router with 192.168.1.1

  I have a small home network with the E8350 (AC2400) and a PK5001A of Qwest ActionTec modem.  I needed to put the router in Bridge mode to enable NAT in the modem works properly.  By simply disabling the NAT in the E8350 network broe. Once I placed the E8350 in bridge mode, I lost connectivity via 192.168.1.1.  The network seems to work correctly, I can't access the router remotely.  Is this normal or is it a different setting I'm missing?

  When you have done this, you probably have a new ip address of the primary router. See what she is looking at the main router connections or by manually adjusting it 192.168.1.2 or some other ip that is in your network. If the primary router uses a different subnet as 192.168.0.x, then you must use an IP also in this same range.

• WRT110 disconnects when multiple PC access to the router

  I am new to router technology and have had my router wireless of the WRT110 for almost a year.  We normally have one (sometimes 2) hard laptop computers connected to the router, and a third computer laptop wireless connection.  It seems that when my other child is home from College and connect wirelessly to the router all the connectivity for all PC gets declined.  Connectivity behaves as if it is connect and then disconnect frequently.  When my child goes back to school we have usually not problems more.

  Am I overload the volume of traffic on the router with 1 2 wireless and 2 wired or wireless Wi - Fi and 2,?  An electric bike helps sometimes, but should I always have to do that?

  Any help will be appreciated as I learn best practices for this device.

  See you soon!

  I changed the settings you suggested and connectivity has been solid as a rock!  I had several laptops and wired PC on and the signal remains solid.  Hope that he holds at the time of my other child home from College.  Thanks much for the advice.

• Block access of the public to Apex admin/workspace

  Hi friends Apex
  
  4.1 Linux 2.0 oc4j 11g listener
  
  I want to block public to go to workspace administration/Apex pages (4550 4500)
  
  I came across this site that does, I do not know how to implement it.
  example
  
  Your comments are much appreciated.
  
  
  Thank you
  NS
  
  Published by: Hunk09 on February 6, 2013 10:53
  
  Published by: Hunk09 on February 6, 2013 10:57

  Hello

  If you use OSH or Apache, you can add rewriting rules.
  Here, so few links which may help to write rule
  http://tylermuth.WordPress.com/2008/08/12/mod_rewrite-and-apex/
  http://tylermuth.WordPress.com/2008/08/13/mod_rewrite-and-apex-part-2/

  A way is also converted to the single runtime environment. There is no APEX or APEX instance admin generator
  http://docs.Oracle.com/CD/E37097_01/doc/install.42/e35123/otn_install.htm#sthref285

  Please note that if you convert to the runtime Environment you can no more develop in this instance.
  Only you can deploy and run applications.

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

  Published by: jarola on 7 February 2013 07:18

• How do you want to give other users access to the Mode to develop Admin?

  Hi - I can see the tab 'develop' when I connect to the my sites, but other users Admin can not. Does anyone know how to change this?

  Thank you!

  Sorry guys... but I forgot to ask.  Are these users non-partner? The "develop" button is visible for users of partner.  There is no work around at this point.  If indeed a partner user and the button does not appear, then it would be a problem.

  -Sidney

• What is the default admin password

  I've just set up my new laptop Windows 8.1, with a local account. Now when I try to do anything he asks administrative password. I never put a password, y at - it a default password

  No, it isn't.

• Can I restore my computer to erase my default admin password?

  Well from what I read I can't reset my password.  I changed it just cause last week a member of the family got ahold of him by chance.  I have not connected because I changed it last.  I know what it is but he always tells me that it is the bad pswd.  I tried my old ones too, even tried different variations that it is incase I hit the wrong key.  I don't have a pswd reset disk and I don't have another admin ACCT.  Like I did today.  I don't have a cause of disk windows vista it is pre loaded on my computer when I bought it.

  The only other thing I can think to do so is to restore my computer to factory default settings.  I thought that the last time I had to do this when I got the win32 Trojan horse and could not clean the system I had to configure everything again.  Including the admin account and password.  Someone has other suggestions before I try this road?  I don't want to use software downloaded online if possible cause I have no interest to pay for access to my admin account again.  Thanks in advance for any help or suggestion.

  Sorry another thought I just had was to restore the computer to a date before last week, I changed my pswd.  Would this work?

  Well, I read on the site that you gave me the link.  Very much appreciated.  I'll let you know for sure.  I check with Best Buy Geek Squad who wouldn't tell me SQUAT of course...  That there is a command in the command prompt to raise the level of administrator.  That's what I searched, for the last time now.  I really don't want to restore the computer, but if I have to.  I don't have time to wait until I can get this album which did not belong to me anyway.  And my main fear is that if I use it I'm having probs with the registration key I have for mine.  I guess overall it is possible that the young girl to the geek team did not understand what I was asking.  But they are a bunch of useless people so useful!  I won't buy anything at best buy.  I understand they have geek team for some reason and earn money from good intentions and unconscious that cannot set their own machines.  But the round back in January so that my computer was still under manufacturer's warranty that I called cause them my nephew.  Don't ask me what they were spent, I wasn't there, but he stopped and would not start again.  After taking to run a comprehensive diagnosis on this subject that they don't tell me something if I wasn't going to pay.  So, after calling their toll-free number and this nice lady make a few suggestions I have restored my computer.  Anyway enough of that.  I will let you know thanks for posting, listening and responding that this gave me a migraine pain and eye of squinting at the small text characters.  Laughing out loud

• by default admin password

  I added a user with administrator privileges and now the original log admin on request a password. I did a. Y at - it a default password?

  By default, there is no password, so just press the Enter key.

• Is it possible to have access to the code for default password manager?

  As an add-on it developer I am able to access the 'open source' code? If yes where can I ask? In particular, I would like to see the code that retrieves the user name and password and returns it to the password manager. If it has unlimited access, I would like to know where to go.

  You can see all the code in Firefox via the site Web of MXR, but only the latest versions of all the branches and not for these 13 Firefox an old version that you are currently running.

  Return to Mozilla: http://mxr.mozilla.org/

  • https://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/latest/source/

• HP Streaam 11 RTL8723BE: How to get around the disabled system and Admin password

  Hello

  I'm having the problem of forgetting the poiwer-on password

  (1) model: 11 flow HP

  product: RTL872BE

  (2) off System Error Message: 75794015

  If someone could help me please quickly I had a lot of app [reciate it.]  I have a test to take today online!

  Kind regards

  Matt

  Hello:

  Restart the PC and enter the unlock code...

  60692031

• The admin user doesn't have access to the Standard user account files

  OK, I'm lost.  It's crazy.

  After reading the reasons to do most of your work on/as a Standard user, I created a user account (quite a while) and have been using it since--and perhaps the way I did have this problem.

  If I remember correctly, this is how I did it.  I had a LOT of files under my old ID admin, so I created another Admin account and then replaced by former Admin account is a Standard user account.  I have been connected and makes every slot the user account Standard since then, with Windows poping a request my Admin password whenever he needed.

  Today, I needed to change a tax return of 2013 - and when I reloaded TurboTax last year and needed to get the State program, TurboTax wouldn't, claiming that I need to be logged in as an Admin user (I have not the popup asking my Admin password).

  OK, here's the problem.  When I have users to switch to my Admin account, after the passage, almost all the icons on my desktop disappear AND there are only a couple of files in my files of Documents Libraries\Documents\My.

  Everything to go.  I thought as an Admin user, I had access to everything.  How can I get all this stuff back (the icons on the desktop for example and other user account files, etc.)

  When I was logged in as an Admin user, it seemed that I could share files with other Useers - so I thought, Aha, that's how it works.  So I logged on my Standard user account - but the ability to share my files, etc. did not exist, at least as far as I can tell (that is, cannot find this option anywhere).

  If all goes well there is something simple that miss me that things work so that as an Admin user, I have access to other user accounts where - it is supposed to work, isn't.

  Obviously need help.  Thank you.  Ron in round rock

  In fact, I have nothing - as stated in the above comment, I could see all my files and folders User\ron

  -> This either means that the folder is already shared, or that UAC (User Account Control) is disabled on your PC. This isn't a good idea because it exposes your computer at serious risk.

  I can edit, delete, running back, I can't (or maybe since I am the only user on this machine, I should leave him alone).  Just curious as to what I did exactly.

  -> If you have shared with read/write access, you can create/edit/delete the files.

  And finally, as an Admin user, I have only 4 icons in the taskbar (IE, Chrome, Windows Media Player and Windows Explorer) - that doesn't sound right.

  -> You'll get exactly icons you placed here while it is logged on as admin user.

  And really Finally, with regard to the disappearance of all the icons on my desktop when logged in as Admin user.

  Each user has his own profile. Inside the profile, there is the user's desktop. Desktop shortcuts that are visible while connected as user A are not visible when you are logged on as user B because each user has his own office!

  There is one exception: most applications require at installation time if their shortcuts must be visible by all users. If you answer 'Yes', then the shortcuts will go into this common folder: C:\Users\Public\Desktop.

• I forgot my admin password... and I'm stuck on the computer.

  They gave me a computer that was won by rafel. It came with no software and no purchase receipt. I lost the paper with my admin password on it, and I'm stuck on the computer. I need help.

  * original title - I forgot my admin password... and I'm stuck on the computer. The cmputer gave as part of rafel, so there is no software to the computer. Can someone please help IT

  ..  I lost the paper with my admin password on it, and I'm stuck on the computer...

  While your application may very well be authentic, it could also be interpreted as a surreptitious attempt to bypass Windows security.

  The only recommended method to retrieve an administrative password is to login as another administrator account and reset the password to a known unknown. If the administrative passwords could be easily overcome, there would not be much point in them.

  It is in the terms of use and the Code of conduct of the responses of these forums to request or provide assistance to the cracking a password. Do not forget that you agreed to these and review if necessary.

  You can view the policy of Microsoft about lost or forgotten passwords (KB189126) for more information on what resources are available to you.

  The only advice that I can offer you is either begin to guess what the password could possibly be or reinstall Windows by default.