WRT110 disconnects when multiple PC access to the router

Similar Questions

• When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.

  Original title: Windows Explorer announced.

  When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.  How can I stop this coming?

  I think I found a solution.  A very good actually, if it works.  I opened the adversiment. just a line in the upper part of the screen and goes to unsubscribe.  The line mentioned coupons that I'm not interested.

  He said that it takes several days to unsubscribe, so I don't know if it will work.

• Micro adapter USB keeps disconnecting when I try to copy the files.

  1 messages
   
   
  Micro adapter USB keeps disconnecting when I try to copy the files.

  Hello

  I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

  Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

  Any help will be appreciated, thanks in advance!

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  Method 1:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2:

  I suggest you to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

• I have first items 13, recently installed on a new laptop of Dell Inspiron 17 5000 Series. The program works very well. However, when I have access to the program, I get a message that there is an update available, 13.1. I let you go ahead and do the upda

  I have first items 13, recently installed on a new laptop of Dell Inspiron 17 5000 Series. The program works very well. However, when I have access to the program, I get a message that there is an update available, 13.1. I let him go ahead and do the update before using the program. It only updated, then restarts first elements 13. As soon as the program loads, I again get the message that 13.1 update is available. How to stop the happy ground?

  RTA,

  Thank you very much for your answers. As you suggest, I went to the help/updates and found that 3 points were scored update, Manager, 13 Photoshop and first elements 13 elements. On a hunch, instead uncheck one of them, I thought I'd see what would happen to let update all 3. It took a while, but, long story short, stopped the happy Vangogh and everything seems fine. Thank you for your messages, much appreciated.    Walt Maken

• HTTPS access to the router does not work with Firefox 33.0

  HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
  Thank you.

  Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?

• Failure of firmware WRT54G leaving no access to the router config

  I have a WRT54G Router.  Running Vista SP2 64 bit on a laptop computer connected to the router.  When I tried to upgrade the firmware I'm connected wireless.  (I know, please just think it is but do not type it)  During the upgrade, disconnected from the Internet and the upgrade has failed.  I connect right now wireless using someones unsecured network.  I tried to update the firmware to 8.00.7.  Since then, I am unable to access the router config using IP 192.168.1.1.  I read so many posts that I can handle it.  I checked and this is the IP address on display in Vista, (network & sharing, view the State, properties) however I cannot ping as intellectual property.  It expires every time.  I did all resets (10 seconds up to 1 minute) on the router and the power of the cycle etc.  Nothing.  I downloaded the firmware utility and I get a message error every time that it is impossible to get responses from the server.  I tried my password, I think it went due to all the resets, and use admin as password.  I disabled my firewall.  I have Network Magic and when I checked the internet access control it says I am able to do.  Is there a way to disable Network Magic?  May this be the cause?  When this all started, I got my own internet connetion.  I am moving so I unplugged my internet service.  Because I'm just trying to connect to the router locally, should I really to have a live internet connection?  Help, please!  I don't want to buy a new router.  It has been very reliable.  If I don't buy something again, you can recommend something just as reliable.

  There have been 2 or 3 times where it looked as if I would be able to connect to config interface and the basic screen firsrt of loads with minimal data and not of clickable links to allow me to change the screens.  The '&' from one of the links that are supposed to appear but do not, is the only thing that appears in this field and if I click it, I either an error in IE that it can not connect, or, it takes me to the screen of Ports with minimal data and I can't move forward from there.  In the upper right corner of the screen, it shows that the firmware version is 8.00.7.  ?????

  P.S. Obviously, I only am not computer savvy very so excuse me if I'm missing what is obvious.

  Kevj,

  Thank you for your support.  Thank you to tell me that TFTP is tricky because I would have just given up.  Imust have tried 15 times without success yesterday.  I have run this morning.  Try first worked.  Go figure!

  Thanks again,

  Steve

• access to the router, by default admin admin password?

  When you try to access the router using default admin admin passwords I can't. Said unauthorized access.

  What im I doing wrong? I have not changed the default as ive just installed it?

  Any suggestions?

  Well re installed with less haste... it turns out that during the installation of the router refers to own name and password.

  You must remove this and replace (if you want) with the so-called default... admin... Admin.

  That is the question... Thanks for the help.

• E8350 in Bridge mode allow me access to the router with 192.168.1.1

  I have a small home network with the E8350 (AC2400) and a PK5001A of Qwest ActionTec modem.  I needed to put the router in Bridge mode to enable NAT in the modem works properly.  By simply disabling the NAT in the E8350 network broe. Once I placed the E8350 in bridge mode, I lost connectivity via 192.168.1.1.  The network seems to work correctly, I can't access the router remotely.  Is this normal or is it a different setting I'm missing?

  When you have done this, you probably have a new ip address of the primary router. See what she is looking at the main router connections or by manually adjusting it 192.168.1.2 or some other ip that is in your network. If the primary router uses a different subnet as 192.168.0.x, then you must use an IP also in this same range.

• When Photosmart C6380 connects to the router Netgear WNDR3400, internet connection lost.

  Using HP Photosmart C6380 wireless connection to a Netgear WNDR3400v2 router.  When the printer is on, all devices of lose the internet connection, but can be crazy.  Network WPA2 authentication. the printer shows WPA authentication configuration page so maybe that's the problem.  How can I keep my internet access while the printer is connected to the network?

  FRST, make sure that your router has the latest firmware.

  Let's define an IP address static and exeternal DNS of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• EA6700 - could not get access to the router - hangs forever

  I hope really I can get help from som here, because this time Iom stuck.

  Just today, I have problems with my router connection.

  I use 12 IE, Firefox or Chrome. Normally, either would work.

  But now it seems that iff the router is not responding (but it is) - all web access works well - and I'm just not passed on to the GUI login.

  In Firefox, I was always able to get forwarded to the router, even if the certificate was not valid by adding an exception, but now it does not work.

  I get the following "error" messages:

  
  

• WRT150N wireless - download speed of connection is super slow when I move away from the router.

  I have a suggested internet high speed through Comcast, and my wired computer is get 6 download MBS. My wireless laptop is close when I'm a few feet from the router, but decreases significantly when I move out of the room - up to 200-300 KPS.

  I can't even watch a movie from netflix on the floor without stopping and buffering several times in a 1/2 hour show.

  Long-story-short: I expect too much on this Wireless N technology, or is there something wrong with my router, connection, configuration, etc. ?

  The strenth of signal on my laptop shows excellent quality for good, but the speed is terrible.

  Any suggestions / advice?

  JL

  It could be due to the wireless settings are on your router has its default value, which is the reason why you might be faced with the problem. I think you need to change some settings in your router...

  Connection to the router configuration page and then click on the tab below the Strip Radio Standard - 20 MHz and the Standard 11 - 2, 462 GHz channel change and wireless... Wireless SSID broadcast should be enabled and then click on save settings...

  Then click on the "Advance wireless settings" sub-tab and below change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• Connection is de-energized when (not if) away from the router

  Hello you all fine technical staff.

  My name is Jake and I have a technical problem.

  So yes, the connection is either super slow or de-energized when I'm in my room. I am writing to you in the room next to the router and everything works A OK. But I'm going to the 7 additional meters to my room and the beginning of the problems. I have even a booster dose is plugged and it's on the same office that the laptop, but the problem persists. I'm getting full bars, but it still has problems.

  Is it maybe a problem with my wireless card? Or is there something interferes with the signal? Its a mystery wrapped in an Enigma, and I hope you smart people can help... Please.

  It could be many things, but first of all, I would recommend making sure you have the latest drivers available from the manufacturer of the system.  In this way you even if you have problems, you just the best possible start to their fixation.

  To do this, visit the Web site for the company that built your laptop (Dell, Asus, HP, etc) and go to the drivers/download section, choose your model and get the latest updates available for your wireless drivers.  This would not be a bad time to make sure that you have the updated Windows 8.1 and all other updates too.

• Garmin Forerunner 210 maintains the connect/disconnect when it is plugged into the HP Pavilion dv6-3040sd

  I have a problem connecting my Garmin Forerunner 210 (GF210) of my HP Pavilion dv6-3040sd. I know that the problem is with the laptop, because I have tried several other laptops and it works well. When I connect the device, windows installs the drivers. So far so good. When the drivers are installed, the laptop recognizes the GF210 and it connects. A window opens to let me choose what I want to do, but before I can decide the device is disconnected and reconnected. He goes on and how.

  On computers laptops onther the GF210 appears in the 'Computer' section as an external hard drive.

  My laptop is running on Windows 7 64 bit and all windows updates are installed.

  Does anyone know an answer to this problem?

  Hi HarmR,

  In fact I have some stuff in my bag!

  Because your system is unable to recognize the Garmin unit long enough to change the drive letter, I have recommended to perform a backup and restore of your operating system. This can be done by following this document on the backup of files (Windows 7), and more to perform a recovery of the system HP (Windows 7). This should restore your system to the factory settings.

  If the problem persists, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl
  
  I hope this helps!

  Have a great rest of your Thursday

• my pc disconnects when trying to save in the folder that is located on the same network share as "offline files".

  I have 11 Windows 7 and they were all 'My Documents' redirected to a folder on a network (H:\) drive, in other words it has been made available offline. On this network drive, there are various files, some are personal folders and some are for public use (DATA, COMMONS, etc...)

  Now, sometimes when I try to save a document in the network drive, but not in my personal file, lets say H:\common, the laptop disconnects and shows me all the folders in this shaded in grey, network drive (as when I'm offline) and by the single folder is the personal folder which is always available. When the application attempts to save to disk network is displayed with an error message saying that he was unable to record on the disc, the laptop comes online again. This process can take anything from 10 seconds to 5 minutes and in a few rare occasions blocked the entire computer and I had to restart the machine.

  I'm having this problem on all computers, but not all the time, it can produce a few 3 - 4 times per hour, sometimes I can secure documents without any problems, and sometimes, it has not allowed me.

  Besides some of the laptops are connected to a windows 2000 server server and others to a Windows 2003 server, and as I said, all have this problem.

  I tested and replaced, hardware, tried the service packs, disabled antivirus programs, disabled the Auto Disconnect on servers... STIL not luck

  Any ideas?

  Thanks in advance

  Hi rpgoni,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Forums TechNet Windows Server général.

• 5.1 ESXi host rest disconnected when it is connected to the new vCenter Server 6

  Hello

  I created a new version of vCenter Server 6.

  I have e vCenter Server 5.1 connect my 5.1 hosts.

  I want to connect hosts to the new vCenter and then upgrade to ESXi 6 guests.

  I disconnect hosts on the old vCenter.

  The I connect hosts to the new vCenter, and it happens with all the vm´s, etc..

  But it is disconnected.

  And it keeps beeing disconnected even when you try to connect again.

  If anyone has experienced this?

  Thank you

  Thomas

  Have you added these hosts in your new server vCenter along with their licenses?

  Otherwise, if please add host license in your vCenter license inventory and assign to those of your hosts and then try to re - connect.