Access to the stadium when not at the Doc root

Similar Questions

• When it transfers data to the microcomputer by Uart, USB etc PC, it must either be aware access to the hard drive of the PC or not?

  I want to know when it transfers data to the microcomputer by Uart PC, USB etc., it must either be aware access to the hard drive of the PC or not.
  When the Windows operating system run my programs, hard drive is accessible when there is a space of memory?
  For example, virtual memory method return page-by-page, page-out using the drive hard when memory is used in full.
  I am using Windows 7 Home Premium 64-bit. The access to my PC hard drive light flashes even though I don't run my program.

  The lamp for the drive starts flashing as the computer is running and programs are running. Windows is a program that runs all the time and access the hard disk.

• When trying to download Adobe Flash player, error, do not have access to the installation program

  I have a windows 7 64-bit and I am the administrator, but when I try to download flash player, it says that I don't have access to the installation program, now I'm without flash and almost nothing works. Any ideas?

  First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.

  You should also add a corrupted on.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• Table or view does not exist when try it and the table access to the remote but database was OK before

  Hello

  With the help of 11.2.0.3

  SQL that accesses, one table of remote database link remote db - fonctionnee during over a link db months readonly

  The remote database table has been abandoned and then recreatde.

  Is there some other step needed to allow access to the table in the remote database?

  Thank you

  You have lost your privs when the table was dropped.

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• Have been locked my apple account and do not have access to the email recovery. Someone knows what to do?

  I recently bought a new iPad Air. When I went to buy a game, that he told me that I have to put in my answer to security question I tried to do, but I got them wrong because I did not in so long. He ends by me locked my account and asked me to send an e-mail to the e-mail address of recovery that I could not access because my step mother had set up the account for me and it looks like she has put in her e-mail. I do not see my father and my step MOM more, so there is no way to get access to the email account. Any help is greatly appreciated.

  You must contact the Support of your country to get reset questions: Contact Apple for the Apple ID account security support

  If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset you can then update your email address of relief for possible future use: on your Apple ID - Apple Support email addresses

  Or you might be able to change to 2-step verification: frequently asked questions about two-step for Apple ID verification

• Access denied: the IP address of this computer host is not on the list of eligible access of the target.

  Hi all:

  I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

  The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

  Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

  Thanks anyway. National Instrument of love. Hope to work there one day.

• I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  I have these multiple .exe running on my registry? security of wireless modem?

  I have 2 questions:

  1. I use a wireless modem to get on the internet at Virgin Mobile Broadband2Go device. Is it possible for some to get access to my PC, when this device is active?

  2. I think that someone is due to ghosting my PC. On my registry, I have 2 of the following: iexplore.exe attributed to administrator. Then I have an explorer.exe attributed to administrator. I have 6 svchost.exe running 2 assigned the Local, 2 assigned to network service and 2 running service attributed to the system. Can anyone provide an answer why I have these multiples, exe running on my registry?

  Thank you very much

  GreenGiant

  Hello
   
  Yes, it is possible to gain access to your computer; but not without your permission. The firewall on the computer prevents any unauthorized entry. Refer to the following articles.
   
  What is a firewall?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-firewall
   
  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall
   
  How will I know if a wireless network is secure?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure
   
  When you say "Record" do you mean "Services" in the Windows Task Manager. Its common to have these processes or services to run in the background.

  'iexplore.exe' means 'Internet Explorer'.

  'explorer.exe' means 'Windows Explorer'.

   

  What is svchost.exe?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-Svchost-exe

   

  You can scan your computer with MSE to check the virus or malware if it affects your performance.

   

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• Windows asks for a password when you try to access to the "view work group computers."

  We are on a network.  Main computer, that we can access through the receptionist connect you and access shared files on this computer.  Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers."  We tried to use its password.  However, the shared files are still not accessible.

  Hello

  1. what happens when you enter the password?

  2. how many computers are connected to this working group?

  Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  I hope this helps!

• When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.

  Original title: Windows Explorer announced.

  When I have access to the internet, I get a page advertisement of Windows Explorer that is empty.  How can I stop this coming?

  I think I found a solution.  A very good actually, if it works.  I opened the adversiment. just a line in the upper part of the screen and goes to unsubscribe.  The line mentioned coupons that I'm not interested.

  He said that it takes several days to unsubscribe, so I don't know if it will work.

• Compacted Outlook Express and save some of my emails. Now, I need access to the following, but can not open them. How to reopen these emails? __

  Compacted Outlook Express and save some of my emails.  Now, I need access to the following, but can not open them.  How to reopen these emails?

  Hi Redtiger1705,

  Lost emails immediately after compact preforming?
  If so, Outlook Express creates BAK files before compaction. They are copied there as a precaution, in case something goes wrong with the compaction. The following steps should help those rear:
  
  1) open Outlook Express and go to tools, Options, maintenance, store folder. Copy the entire path to the storage folder, and then click OK.  Close Outlook Express.

  (2) go to the basket and search for all files with the .bak extension.  Restore the most recent .bak files. That he will put in the OE store folder, but still like a BAK file.

  (3) click on start, run and paste the path that you copied in step 1 in the run box, and then press ENTER.

  4) click Tools, Folder Options. In the Folder Options window, click the view tab.

  (5) less advanced, uncheck the "Hide extensions for known file types".

  (6) you should see the two sent a Sent Items.dbx from the file as well as the Items.bak. Rename the Sent Items.DBX to Sentold.dbx and Rename Items.Bak sent to Sent Items.DBX. When you open OE, your messages sent items must be restored.

  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access to the Internet and get a "atl100.dll" error when you try to use Firefox

  I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

  Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

  Hello

  1 did you changes to the computer before the show?

  2. What is the full error message?

  3. who is the antivirus installed on the computer program?

  4 are you using wired or Wi - Fi to access the Internet?

  5. What is the version of Internet Explorer installed on the computer?

  The possible causes:

  • ATL100.dll file is missing, as it was accidentally deleted from your computer
  • ATL100.dll file is damaged by viruses and your computer cannot access the file.
  • ATL100.dll associated with registry files is corrupt and obsolete.

  Perform the steps:

  Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2: Reset of internet explore and check. (If you use Internet Explorer)

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the links:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• When you try to share Windows Media Player, error, you must first be allow access to the library

  I want to share my Windows Media Player and have checked all the boxes according to the needs

  But when I go to another identical computer, it displays the name of the library to share but said

  "Before you can play items in the library, you must first access to the library" it works the opposite way round - I can see the other computer media and play from there, but cannot read any media on this computer.

  In the box, I want to run the media on I can see the name but not the small triangle to expand the options

  Am running Vista professional

  Any ideas please?

  Hi TonyCope,

  1 are you able to share files both ways on both computers?

  Have you checked if you have configured media sharing on the computer that doesn't work properly?

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-sharing-media-in-Windows-Media-Player

  2 are the two machines running Windows Vista Business?

  3 a share already worked on both computers, or has it always been this way?

• Windows cannot access the specified device, path or file. May not permissions to access you the item. Can someone tell me how to overcome this problem.

  Windows cannot access the specified device, path or file. May not permissions to access you the item. This message appears when I try to access also anti programs anti-virus will not play CD in windows media player. Can someone give me advice on what to do to remedy the problem.

  Hi Lee,.

  • You did any computer change?
  • What anti-virus program is installed on the machine?
  • What is the full and an error code error message when you access the CD through Windows Media Player?

  Follow the steps mentioned below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Note: try to access Cd rom drive and antivrirus program and see that you get an error

  Perform a clean boot according to the link below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 in order to his usual manner once completed troubleshooting computer

  The analysis of Microsoft Security Essentials online according to the LienSuivant:

  http://OneCare.live.com/site/en-us/default.htm

  Reply back with the results

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.