Accidentally, by clicking on the security apparatus Softwear would disable my Win 8 admin password?
I have no idea what could have happened to my password admin on my new Windows 8, (gateway NV), but it's not good! I have MONTHS of research on what I can not access to, and do not know how he would have changed, I am the only person who had it. I don't even know if this button was touched, I'm looking at all the possible things that could influence a password parameter.
It happened when I had multiple open windows, for the most part to different legal sites, as ILCS & heritage.org, sites that I wouldn't think would be compromised. I have installed Norton. Also Malwarebites, both have proved to be effective and will work together. I starts to implement the program of the voice, & was the programming of the microphone. It's the last thing I was doing.
The speakers muffled, then a reverberation resonated... This still is, & it picks up every little sound of echo.my dogs lose their minds, it's kinda weird for me also. But the more I tried to find a way to stop it, more I didn' there know what I was doing, of course. The next thing that happened was whenever I click to access anything EITHER, the Admin password screen opens, but the password I have on all three of my computers no longer works on this one, and it's where all the one is I NEED for my research. They are originl and cannot be replaced, I have not even the camera or whatever it is now. So, they are not saved anywhere else. I have network the computers together, so I can access photos of each of them, for different parts of the book that is intended for the computer. But I can't access them on those other PC either, without Admin PW... What the hell happened?
Sorry, this really sound like a Windows support question and not at all related to Firefox. First thing to do would be to talk to the bridge (since it's a new device) and see if their support can help you.
* Fixed! (I hope!) * Firefox crashes / accidents by clicking on the Browse button to upload files
I was about to put this problem here but I found a solution, I wanted to make this post so I hope that others may benefit.
I checked all the current solutions on the Forum, but none of them worked. To reinstall Firefox, creating a new profile, disabling and troubleshooting plugins, start in safe mode, by unchecking the option "expand to current folder" in files from Microsoft Explorer... I even ran ' sfc/scannow' in an elevated command prompt and rebooted my computer. Nothing.
However, I went browsing on other forums and someone mentioned a program called CCleaner. I had used this program years ago and knew that it is reliable, then I installed once more and clean Windows, my apps, and the registry.
It worked! Difficulty easy and nice I wish I knew about 3 hours ago. I hope that this has helped others out there, you can find CCleaner here: http://www.piriform.com/ccleaner/download
Let me know if this helped!
(EDIT: Nevermind, the problem came back.) (Help?)
Thanks for your help John, fortunately I managed to solve the problem. You were right, it was based on Windows. I noticed that there are a lot of people with this problem and almost no solution. So frustrating! For those who have the same problem, what I did. I hope it'll work for you.
1 Start computer in "Safe Mode with network. Press F8 on your keyboard while your computer starts up, until it's in Windows. You should be able to select this option. Check if the problem still persists. I hope not. It didn't with me so then...
2. I did a clean boot of my machine, to make this early success, type "msconfig" in the search box, and then press ENTER. Click on the 'general' tab, then 'selective startup '. Clear the checkbox "Load Startup items". Now, go to the services tab, click "Hide all Microsoft services", and then click on 'Disable all' for all that is left. Click OK, and then restart.
To see screenshots of this process, go: here. And click on what operating system you have. This will also explain what you should do after you did a Reboot own. Follow the instructions and I hope it solves your problem.
It is a Windows problem, because it mainly affects browsers the amount of troubleshooting on this subject in the browser support forums is staggering. Without what I see, I looked for hours trying to solve this problem.
I hope that this will help people who come here looking around for a similar question.
Once again, thanks to John99 and Wesley Branton. I'm sorry I may have lost your time!
Accidentally, I clicked on the box "don't show" on the start page. How can I get the menu back?
Then in the start page, I accidentally checked the box "don't show". Now I can't find a setting to bring it to the time where I start the program. Can someone help me? I use Adobe Fireworks CS5.
Well, I found it, it was in the preferences option in the Edit tab.
left click in the web browser options are disabled in the latest version
In all previous versions of firefox, I had no problem in the drop-down list when a left click to open a link in a new tab or save the highlighted text or even to save an image on my disk. But now with the last update (20.0.1) I came across something that bothers me by the length of the drop-down list (too long, too much stuff on it) and half the options are disabled, making it harder for me to surf the web that I used to do. I took a screenshot of my question. I hope this will help. In addition, that my OS is windows 7. http://www.darkworlds.se/images/other/firefx20bug.jpg
It is a problem to have an out-of-date version of Firebug, most likely you have disabled the automatic update of the addons.
The best way to fix it is to go to tools-> Addons and then clicking the wheel upwards button near the search box. From there you choose ' Check for Updates ' and unless you need specific versions of an add-on, choose "automatically updated addons ' while you there.
You will probably need to update Firebug twice, because it updates a version obsolete and from there to the newest one.
It's the solution, I came on as I had the same exact problem, I tried to create a new profile and tastes.
System Restore with the keyboard and the mouse works do not and do not know admin password
I recently decided to update my drivers on my 9 year old bridge. Apparently the program that I used to do didn't realize a bad driver when he sees... Sort of my keyboard and mouse not responding while windows was loaded. They work enough for me to access the bios, enter the menu start and also when I hit enter to boot from a windows cd.
I'm trying to access my restore points to get rid of the driver that has been installed. Unfortunately when I put the windows CD and try the repair option I can't log on to the volume because it requires an administrator password. I tried Admin admin admin admin and leave blank. I even ran a program to reset passwords (I do not use any which way.) still cannot log on to the volume. I also tried to pass in front of the screen to repair and installation of windows to fix this. I can hit escape and pgup and pgdown but not f8 to agree to the agreement.
When I boot in safe mode with command prompt that it still forces me to click on an account to connect. Which I can't because the keyboard and the mouse do not work when windows is loaded.
I can't get to the command prompt to display the box to help restore points?
· Did you do changes on the computer before the show?
I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.
How do I recover from a corrupted registry that prevents Windows XP startup
Regarding the password administrator there are chances that you must have defined and now you don't remember or if the bridge keep some default password. You can also contact the Support Technology Gateway for help on the issue.
Technical support Gateway
Hope this information helps.
Win 7 Admin password lost stuck in the guest account
Assalam O alaikoum...
I have windows 7 Home Edition premium, I lost my password for the administrator account, I'm stuck in the guest account, I don't have a password reset disk, I don't even are allowed to copy the data FRO C drive and paste into other readers, please help me and I don't want to reinstall my windows. Thank you * address email is removed from the privacy * cell + 923149001117
Andou...There are a lot of options built into Windows to help you out of this situation:
- Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
- Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
- Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
- Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
- Check your paper files (works only if you threw down the password somewhere)
Accidentally took possession of the C: drive, I am able to come back on this action and give back the property to the SYSTEM?
I took possession of some files in CMD when I accidentally took possession of the car, I installed Windows (c), and I panicked. is it possible to return to this action?Thank youEDIT: I also accidentally made the terrible mistake of appropriating of System32. I hope that the information you give me to C: will be equally useful for this!
I suggest to follow the steps provided and check if it helps.
(a) click the drive you want to delete the property to and then click Properties.
(b) click on the Security tab, click Advanced, and then click the owner tab.
(c) click on edit. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(d) click on the name of the user or group, and then click Remove.
More information: What to know before applying permissions to a file or a folder: http://windows.microsoft.com/en-US/windows7/What-to-know-before-applying-permissions-to-a-file-or-folder
Hope this information is useful.
How to do in the security settings
Can how I get in the security settings of safari
Depends on what you mean. Security preferences are located in the preferences panel security & privacy of system preferences. For Safari, open Safari preferences and click on the Security tab.
Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session
My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?
Welcome to the Forums of HP Support!
I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.
I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.
That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.
NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.
If you have completed all the above steps and your product still has a problem, the printer service.
Contact HP for service in all countries except Asia-Pacific.
First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
Cost of repair out-of-warranty printers may apply.
What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to choose your
Step 4. Scroll down and click on: contact HP options - click Get phone
File number and phone number are displayed.
I hope this helps. Good luck!
Microsoft Update: Could not get to the site because the requirements for activex but no pop up displays to allow picking to run. Went through all the security setting and security tools disabled. setting are the same that second pc where MS Update works
Without much to say... can't make MS Update site
Hello shaimls, welcome.
I apologize if I'm running on all the steps you have already tried, but give it a shot:
* Disable all antivirus/security software is installed on the machine. Internet Explorer can not effectively block ActiveX content in this case.
1. open Internet Explorer
2. at the top right, click on tools > Internet Options
3. click on the "Advanced" tab and click on "reset...". "all the way down
4 confirm you want to reset all settings to the factory settings
5 restart the computer
After the reboot
1. open Internet Explorer
2. at the top right, click on tools > Internet Options
3. click on the security"" tab.
4. click on 'Trusted Sites' chart to select
5. click on the button 'Sites '.
6. Add the following text to the list of trusted sites
Afterwards, click on "Ok" or "Ask" to all windows and restart the computer. Then try to update Windows.
Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Could not start the Security Center Service
I clicked on Windows security alerts, it showed "The Security Center Service is disabled". Then I clicked "Activate now", came a "Could not start the Security Center Service" message. Please tell me what I need to do.
Thank you very much!!!
See if these are useful:
Impossible to turn off read-only - and I already checked the Security tab
Hello, I use Vista Ultimate. I'm on my home computer and have full administrative rights. Have a big problem trying to get the recovery off the power on a personal folder read-only. It is NOT a folder on a network or is a system folder. When I go in the folder and click on the Security tab, ALL users have full right to make any changes. No error displayed whenever I then deselect read only on the general tab, click on
or . But when I re - open the folder and check the properties, read-only is still active. It's driving me crazy. HELP!?!?!?!
And Yes, I tried this:
"To view or to remove the read-only or the attributes of system files in Windows Vista
- Click on start, run, type cmd and press ENTER...
- To view the syntax for the Attrib command, Type attrib------? at the command prompt.
To remove the read-only attribute and to set the system attribute, use the following command:attrib - r + s drive:------
For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command:attrib - r + s c:\test
Be aware that some programs may not operate correctly with folders for which the read-only attribute and the system attribute are granted. Therefore, use the following command to remove these attributes:attrib - r s by car:------
For example, to remove both the read-only and the attributes to system for the C:\Test folder, use the following command:attrib - r-s c:\test
If the run command is not listed in the start menu, follow these steps:Click Start, click principally made programs, accessories, and then click Run."
And get an error that says: parameter Incorrect Format.
Have you checked to see if the files in the folder are effectively read-only or if the only problem is that the file is checked in read-only?
You may need to go higher in the chain of record because some properties are inherited (see advanced security of the folder until you come to one where the special permissions list including all permissions that are inherited for administrators or your user account). It does not stick because you don't have the permissions and/or ownership to allow you to make the change. You must have permissions to full right for all folders (both on the main page and in the special permissions list) and you will have to take possession of the records as well. Then change the ownership and permissions for yourself and administrators and don't forget to check the box for all files and subdirectories. This should give you what you need to make the changes. Here is some information that might help.
To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.
I hope this helps.
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
How can I activate the security system?
I tried to turn on my windows Security Center, open widow and I clicked on the security Tower Center on. I have that then I got an opop window saying windows Security Center service cannot be turned on.
1. did you of recent changes on the computer?
2. What is the full error message that you receive when you start the service?
3. do you have security software installed on the computer?
4 when was the last time it was working fine?
I suggest that you try manually start the service of security of Windows on the computer and check if it helps.
(a) open the Start Menu
(b) type services in the start search box and press enter
(c) in the Security Center locate service list and try to start the service.
When I change any thng... then it shows access is denied... bz in c and d drive all thngs under the Security tab has been denied... _
is Security tab..tht thngs that may access are changed for refusal...
so please now tell me how to access all the operations of tht... bz if I open c or d drive... it shows access is denied...
and it shows in his propertis... u must b an administrative user to display the object properties say security... bt m even not able to make changes in the properties of the account...
ND if I try to open the USB... it does not get approval to open.
Please hlp me to...
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
This would happen if the settimgs of security on the computer have been modified.
I suggest that you reset the default security settings and check.
How to restore the security settings the default settings?
If the previous step fails, then you will need to provide manuully of file permissions or folder.
To apply permissions to a file or a folder
(a) right click on the file or folder and then click Properties.
(b) click on the Security tab, and then click Edit.
(c) do one of the following:
1. If you want to set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.
2. to change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.
What to know before applying permissions to a file or folder
Troubleshoot "access denied" when opening files or folders
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Unable to download the message "check the security setting.
Don't leave me not down load anything... Says check security setting. Where?
1. what browser you use to download the program?
2 did you do changes on the computer before the show?
I wish that you disable the security software and then try to download the files.
Disable the anti-virus software
Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
If you use Internet Explorer to download files, I would try the steps in method 2
I also suggest you to follow the steps mentioned below that allow file download in Internet Explorer.
a. open Internet Explorer.
b. click on tools, then options.
c. click on the Security tab.
d. Select the Internet Zone.
e. click on the custom level button and then scroll down to download.
f. be sure to enable the download of the file.
g. click on apply and Ok
h. restart Internet Explorer and see if that helps.
Hope this helps and keep us informed if you need help.
Maybe you are looking for
Ok. What does average contributed on this site?
I asked two questions. And two of them did not have all the answers and a red "contributed" was written down. IM new here so I don't know what that means. Could someone tell me?
Satellite A660 - recovery and partitioning of the C drive
I have an A660 running Win 7 (64-bit) and he always has to turn more slowly than I expected. I have a 450 GB C drive and would like to reformat the drive and partition to C and D.I want to make a full recovery and re-partition. The question is what s
I can't change the value of parameters.continuetesting in my PreUUT callback. I try to set the value passed on the entry of the user button, but he keeps having the value "true"... what I am doing wrong?
HP pavilion 1260la g4: medardo
Computer laptop mi me pide ingrese administrator password or password password very incorrecto veces despues me appears disabled system 87553230 urge me Ayuda por favor
Computer stuck in the loop of update configuration
original title: after an update of windows the computer configures 3 updates then stops, restarts, and then did exactly the same thing again and again and again. Can't get windows log in screen as it sstays in this configuration and stop cycle How do