Accidentally plugged usb battery. Its now on Audio jacks are dead

Similar Questions

• How to set up a USB Microphone and a headphone audio jack at the same time on Windows 7?

  I recently bought a CAD u37 USB microphone for use in various records and a commentator game on Youtube when I came across a problem. When I plugged the microphone all other sounds immediately extinguished and I couldn't hear the game. I tried to unplug and re - plug in the headphones and the microphone, even play with no helmet without result.

  I did some research and found out it's because the microphone is automatically configured for audio input and output and the card sound/headset, not having a configuration. I've recently considered buying a $5 female jack audio converter USB to work around this problem.
  Will this work, or just be a waste of money? Are there simpler solutions like a flick of a switch of audio control panel configuration? Are there any programs that will allow me to configure the audio and input output? Is it still possible? Thank you!

  Hi Ben,

  I suggest you try to connect USB female to the converter audio jack, this should help to solve the problem with simultaneous USB microphone and audio input jack using headphones.

  If you have any more questions, respond to this post with the State of the question. I'll be happy to help you.

• My audio jack is "cut", the speakers still work, but when I plug the headphones there is no sound. Help please.

  Basically, I dropped my phone on the carpet with the headphones in. Now, the audio jack is pushed inward.  What is the best way to go about fixing this problem without having to disassemble my laptop me?

  I just noticed in the title of this thread you wrote there is no noise of the taking. In this case, repositioning just decision-making may be insufficient, and the plug should be replaced. As I said, this could involve replacement of the motherboard.

• HP m7160n the front audio jack problem

  I am running Vista Home on my PC Media Center m7160n.  I used to be able to plug my headphones into the front audio jack and it would reduce the rear speaker output.  Now it doesn't!  I entered the sound properties and is set to turn off the rear socket, when the system detects a card into the front socket.  The helmet still works, but I need the speakers off when using the headset.  I hope this is enough information.

  Hi MrBassMan26,

  It's weird and looks like the jack-detect is not working properly. This problem just started happening? It happened after installing anything, even a Windows Update?

  If it just started happening, you can try to perform a restore of windows to an earlier point when it was operating normally. Or you could try to re - install the driver audio or even install a updated audio driver. Who should take care of it, and if not you may need to make some configuration changes in one of the sound properties (Windows or Realtek).

  I see that you have Vista, you accidentally upgraded to Vista XP?

  Try to install audio driver for Vista from Realtek: http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & GetDown = false

  Let us know how it goes.

• I've got my head phones plugged in but it says no Audio output device is installed that they was working yesterday now they aren't... someone can help?

  I've got my head phones plugged in but it says no Audio output device is installed that they was working yesterday now they aren't... someone can help?

  Hello

  What is the brand and the model number of your computer?

  You are running audio troubleshoot, if not I suggest you follow the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=Tab03

  I also suggest you to check the system information from the link.

  View your computer information

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-your-computer-information

• My Mac ran out of battery and now stands at Gray loading screen. Help, please

  Any help would be appreciated. Thank you in advance.

  Rigman wrote:

  Any help would be appreciated. Thank you in advance.

  The battery is now charged?  Are you still connected to a power source or did you go to battery only?

  He may be sitting on the gray screen because it's stuff that should be done after the power failure.  Longest I've seen here is a user who has had to sit on the gray screen for 3 hours before he left for blue - then office.

  Keep the laptop plugged in-stalled upward, so it can stay cool and wait - it can also sit on the blue screen for a while.

  After that your desktop comes up - do a restart and look at the screens - as it might still have some startup problem - if yes - once more generally he does.

• I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I use a splitter cable, and have verified meter that it is properly connected.  Also the microphone that I try to use the works when connected to a separate Recorder device, so I know who works very well.

  The audio output on a 2012 port does not support the audio input.  You will need to use the USB ports for audio input.  This will require an appropriate hardware and software.

  Ciao.

• I was on YouTube with my helmet and then I unplugged the and plugged them back and now I don't got no noise at all.

  I was online on you tube with my headphones and then I unplugged the and plugged them back and now I had no noise at all, what can I do? I checked the audio Manager and it seems fine.

  Hello

  (1) you use Internet Explorer or another browser to go online?

  (2) this happens on all websites and pages?

  (3) other sounds work fine on the computer?

  (4) may I know the operating system you are using?

  (5) were there any changes before the show?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Check the playback settings to see if the device is turned off / disconnected.

  Method 3: If you are using Internet Explorer, check if this option is enabled.

  a. Click Start, type "inetcpl.cpl" and press to enter.

  b. click on the Advanced tab.

  c. scroll down to see the multimedia section and make sure that "play sounds in Web pages" option is selected.

  d. click ok to apply the changes and see if the problem still occurs.

  Restart Internet Explorer and check if you can hear the noise.

  You can also try to update flash player on your computer and check if the problem is resolved.

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope the information is useful!

• PERC 5i replaced battery failure now show missing

  Hi all

  I had a battery failed in our PE2950. I ordered one off Ebay new and successor last week. Then, I went in OpenManage and ran the learning cycle. After a week I went and now it's showing as non-critical. I'll go to my DC the week next to solve the problems, but I guess I can just plug the wire into the battery, go simple, correct? This doesn't seem to be a bad battery?

  Controller PERC 5 / i integrated (integrated slot)
  ID                  : 0
  Status: No reviews
  Name: Battery 0
  Status: missing
  County of charging: not Applicable
  Max charging County: not Applicable
  Learn the State: Active
  Learn next time: 0 hours
  Learn maximum: 7 days 0 hours

  I wanted to just chime on batteries reported "disappeared" by the RAID controller.  I recently bought 8 new batteries to replace in my aging fleet of PE2950 with PERC 6i.  Before you deploy into production, I wanted to test the batteries and give them a bit of a load on a test bench 2950.  I power off the system, Exchange in the new battery power and get the battery "missing" error.   No amount of time with the power system would get the battery to a State of "load". I was incredulous complete 6 of 8 batteries were bad.  I was about to return to the seller when I discovered system power supply cords must be completely disconnected from the wall, and the card mother completely drained to residual before replacing the battery!  Once I've done this before every Exchange battery, all batteries tested well and are in charge!

• Restore accidentally old profile and have now lost emails and settings; where can I find them?

  While trying to save a profile, I accidentally restored an ancient. Now, I can't access the emails and settings. Are they stored somewhere, or completely deleted when you restore a profile?

  When you replace one file with another, what happens usually when an old profile is restored (especially when accounts are the same). Then, you have replaced your mail with another version. You olny option are your personal backups, Thunderbird stores no information about the 'cloud '.

• my screen will Dim when I plug my battery cable

  whenever I plug my battery cable into the light going darker and I like it on the lighter, I see that I do not see

  Hello
  Please write your product number (p/n), computer laptop which system are automatically to the help and the country of purchase.
  
  Resources:
  How to locate the portable computer product number (p/n)

• M7690N installed a Galaxy GT520 now no sound from audio jacks

  I have a HP M7690N that I just installed a Galaxy GT520 video card in and now I can not the audio of any of my audio jacks. If I get the HDMI audio. My system is a M7690N running Windows 7 and windows XP (dual boot). also the audo Realtek card dose not appear in Manager devices under XP or win 7.

  Hello

  Please do not post same question several times. The machine is now using his best so that it disables audio existing. To be able to recover it, you must change the audio setting in the BIOS to Auto (or disabled) on Board (or active).

  • Start the machine
  • Press F10 repeatedly,
  • Go to the Advanced menu & device options.
  • As mentioned above, the change
  • Press F10 to save.

  Good luck.

• iPod is on battery low, now dead but does not load

  my ipod was on low battery and now it is dead, but it does not load, what do I do?

  It is possible that the battery must be replaced.

  Make an appointment at the Genius Bar

  If you can't go to an Apple Store, look for an authorized service provider > Apple - find

• I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  I accidentally used "OPEN WITH" and now everything opens with Microsoft Picture Manager, how to fix this?

  [Moved from comments]

  Right-click on a file, select open with, again, and select the appropriate program in the list.  Make sure that the checkbox "always use..." "is checked.

  Repeat for other types of files that are false

• I renamed my folder in documents and settings accidentally using another account. Now, when I logged into that account, all my data is gone. How can I get it back?

  I renamed my folder in documents and settings accidentally using another account. Now, when I logged into that account, all my data is gone. How can I get back all these data?

  Hello Tiffy.T,

  Thanks for the return of the response.  If this happened recently, I suggest to perform a restore of the system to a point in time before you rename the folder.  Please let us know on this status.

  System Restore:

  http://support.Microsoft.com/kb/306084