Account blocked because of "activities contrary to the terms of USE.

Similar Questions

• Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  I would be out of system repair and safe boot mode:

  Start your PC, just before the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Unable to activate Windows XP, error: If invalid code because it vaiolated the terms of use.

  Original title: I made a mistake when I tried to validate my number.

  I have 2 licensed processors for Windows XP.  Recently, I changed the hard drive on my laptop for a larger capacity and when I tried to authenticate my installation it told me that my code was not valid because it violates the terms of use or something like that.  When I answered the questions, I thought he was asking me how my software can be loaded on computers and I said two.  Currently, it is not loaded on another computer.  So, when I remove the old drive and install it on the new drive, it will still only loaded on computers.

  How can I fix it?  When I called the number back once again to try to go through the process again, it's just flat told me it was an invalid button and that's it.  I bought myself, and I know it is loaded only on this one computer.
  Help!
  Thank you
  
  
  
  

  Use the Activate by phone again.

  When asked what service your require the ansafone, fail - eventually the service will put you through an operator, who can deal with you.

• I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements made n

  I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements does not help.

  System requirements | Creative cloud

  The system requirements (lightroom)

• Accept the terms of use

  When you try to sign live account to the security settings for the direct family indicated by the terms of use have not been addressed or accepted. I accept the terms of use?

  Hello

  I am happy to assist you on your request regarding accepting the terms of use for the safety of the family. You can make these changes by following the steps below:

  1. open your browser and go to family safety.

  2 sign in using the Windows Live ID Admin and the password

  3. the terms of use must be displayed and you can accept the

  4. Once you have accepted the terms of use, then try to connect to the FSS client

  Let us know the results later.

  Thank you.

• Unable to accept the terms of use, which is needed to manage the security of the family

  Hello

  I have a new laptop with Windows 8, which I created two users - one for me and one for a child (Standard user - and Coachman on behalf of child) (Administrator). I created a real account for the child and filled out all the necessary information - my live account has been used for a few years, but I update personal information.

  When I try to manage parental controls from the Control Panel, I get an error message indicating that I should go to account.live.com to agree to terms of use. I can't find any place to accept the terms of use, or my account og the child account. I looked for a solution and found that many have had similar problems. One of the solutions that seeems to help was to connect to fss.live.com, but this page just redirects to a generic MS information page of security for the family.

  Any suggestions?

  Thanks for the quick response!

  I managed to find a solution, not an elegant solution, but it will keep your real account (parent1) to monitor your kids.

  1. create a new live account (parent2)
  2. create a new account admin on the PC using the new live account (parent2)
  3. connect to the computer with the admin account and create an account for child
  (using either an og existing live new account - don't forget to check the child...)
  4. you should now be able to manage via the parental control panel
  5. Add a new parent in parental control (your old existing live account - parent1)
  Some steps are probably not necessary, but I managed to get the "accept the terms of use" hampers by following these steps.

• How can I accept the terms of use, to use Parental controls in Windows 7 Professional 64-bit edition?

  After you install the Windows Live Essentials on Windows 7 Professional 64-bit operating system, I tried to access the Parental control feature.  I was unable to access this feature and said to connect with my Windows Live ID to accept the terms of use.  Once connected, there is no option to accept the terms of use, on the terms of use page.

  Found!

  http://FSS.live.com/

• I can't click Next after that I accept the terms of use on programs during installation

  I can't click Next after that I accept the terms of use on programs like photoshop or solid works? Help, please

  Hi Elano,

  Thanks for joining us out on Microsoft Community Forums.

  According to the description provided, its looks like you is faced with a problem during the installation of programs.

  It would be great if you can answer these questions to help you further.

  1. is the issue limited only during the installation of any program in particular?

  2 have you made changes on the computer before this problem?

  I suggest you to check if the program is compatible with Windows 7.

  Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  If it is not compatible with Windows 7, then try to run the program in compatibility mode.

  Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

  I suggest to perform a clean boot, and then try to install programs.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve problems using the clean boot in Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: Once the diagnosis has been made, make sure that you try to step 3 of the article to reset the computer as usual

  We would be more than happy to help you if the steps above did not solve the problem.

• Try to find the terms of use of documents and Web pages

  Hi am writing my

  my university thesis. I'll try to find the terms of use on the use of VMware

  diagrams, documentation and Web page in thesis.  Heart of my thesis is

  the best possible instructions how to install and use Labmanager in

  University teaching. No idea how I read, call, or mail?

  I think that you can reuse for educational purposes.  Just follow the correct citation format (APA, MLA, etc.) for the way in which the thesis is written.

  And I see no reason why you can't, as much as it is for the promotion and support of our product.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Cannot go beyond the terms of use?

  I can't get at the end of the terms of use - can not go beyond 24.9 to continue the download. I'm not Fred, but I'm sure that's not me. Help please

  Hi denephew9999,

  You will need to provide more information about this software, you are downloading, you use the operating system and the browser to download the software.

  Let me know the exact error message when downloading with possible with screenshots.

  Otherwise you can try to download from direct download links available at: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  But make sure you follow the steps mentioned on the page before you start the download.

• Cannot accept the terms of use

  I'm trying to update apps on my phone and I am informed that "media Apple Service terms have changed" I press agree and and I get nothing. Is happening?

  Hi HappyMan2120!

  I understand that you are unable to accept the terms and Conditions on your iPhone 6. It is important to be able to update your applications!

  You posted at the time where the system status page reflects a problem with the iTunes and the App Store: Friday, September 16, 2016, some users experienced a problem with the iTunes and the App Store.

  The system status page now takes into account that the iTunes Store and the App Store work as expected. Please try again. If you have problems, restart your iPhone, and then try again. Here's how:

  Restart your iPhone, iPad or iPod touch

  Enjoy your weekend!

• I have two versions of Shockwave Flash in my Firefox: 17,0 r0 is blocked because of security concerns, while the r0 19.0 seems to work very well.

  Now I ask: what can I do to get rid of this annoying version 17.0 r 0?

  You are welcome

• Block initialization parameter default value of the session variable used in default prompt as "(toutes les valeurs de colonne)" "

  Hello

  I have a business requirement for a dashboard that we built location to get the users that belong to a certain geographic location to the default view of the dashboard with guests together in their geographic area.  He is just giving them a default view to enhance their experience when they connect each day.   Because of the way that we put the default value for the period of time they watch, with the HELP of SAUVÉ the CUSTOMIZATIONS IS NOT AN OPTION.

  I created the default values for the prompt called "area" in a block of initialization. This variable is called V_USER.

  My problem is that only about 80% of users have a value of 'Area' in the hierarchy of our employees.   I would like to someone else by default "(toutes les valeurs de colonne)". "  I was unable to understand how and where do.

  Some of the things I've tried:

  (1)	Setting the default value in the initialization of an empty space block ("in SQL)
  (2)	Setting the default value in the initialization "(toutes les valeurs de colonne) block '"
  (3)	Setting the default value in the initialization block 'null '.

  None of them have worked and the result is that the user who does not have an area ends with a load of zombie dashboard, and while the guest gave rise to fashion "- select value -", the user must press "Apply" again to get the dashboard to display the data.

  The text which lies behind the encircled area in green below correctly becomes the value of the variable to V_USER (it is empty as default and I don't have a box).

  For @{biServer.variables ['NQ_SESSION.]} {[USERS ']} the default zone must be @{biServer.variables ['NQ_SESSION.]} {[V_USER']} {}

  In the red circles below you can see that the guest actually becomes a value: *) nqgtu(* )

  
  

  The illustration below indicates the default value for a user without a box. the second quick block is not updated until you press on apply again...

  

  Thanks for your comments.  I was not able to make this work for my needs.  I have however to solve the problem by changing using a 'SQL result' for my default selection.  Then I created a query that returns rows NULL unless there is a correct answer:

  SELECT 'Service Delivery MOS '. "' Organizational hierarchy. "" Area ".

  "MOS DELIVERY."

  WHERE ("organisational hierarchy". ("" Area number "> 0) AND ("Service Delivery MOS". "Organizational hierarchy" "." " Zone' = ' @{biServer.variables ['NQ_SESSION.]} {[V_USER']} {} ")"

  The "returns no line' I mentioned above resulted in all values being selected.

• the terms of use,

  I keep getting errors when I play the ripped music. Player will not play. Usage rights are missing out on these files. Player does not refresh the license, WMP 11 Windows XP SP3 NeedHelp, Pleeeze!

  What is the exact text of the error message?

  This could happen because you ripped to WMA and with the copy protect music setting (Options of WMP - music Rip) checked. Please close all instances of WMP/Windows Media Center, and then use Internet Explorer to go to http://go.microsoft.com/FWLink?LinkID=34506 and click on the upgrade button. Who help me?

  I also recommend that you clear the copy protect music, to avoid this problem with future tears.

• App works perfectly well on the Simulator (using all modes) and peripheral when z10 in the communiqué of the execution and debug mode. But creates a 'SIGSEGV = 1 fltno = 11 ip = 781722ec error code' when the term is used.

  My application switches between two documents qml is a home page, and the other is actually a video player. Whenever I press the button to go to the video page, it crashes on my z10 and generates the error «terminated code SIGSEGV = 1 fltno = 11 781722ec = ip...» ". But on the Simulator, it works (without of course plays video). When I use the race version and the debug mode, it works perfectly on my z10.

  This problem occurs frequently when I add a new code element. First of all, it happened when I added a scrollview and container, and it's happening now again when a defined a struct in the header file.  It would be nice to ignore this problem? or y at - it some deeper underlying problem which is the cause

  Just tried, I received the SIGSEGV error too, it looks like parent to AbstractPane fixed it.

  void ApplicationUI::changeScene(const QString& newQmlFileName) {
      // Create root object for the UI
      QmlDocument *qml = QmlDocument::create("asset:///" + newQmlFileName).parent(this);
      qml->setContextProperty("_app", this);
      AbstractPane *root = qml->createRootObject();
      root->setParent(this);
  
      // Set created root object as the application scene
      Application::instance()->setScene(root);
  }
  

  My test project is also attached to this message.