Accounting on ACS 3.3, doesn't seem to work.
Hi guys,.
I followed 6 lines configured on our gear, switches, router & Cisco ASA.
However our worm 3.3 ACS did not appear to be seized of the commands used by the CLI users.
1 2 3 4 5 6 |
AAA authentication login default group Ganymede + local AAA authentication login VTYLogin group Ganymede + local AAA authentication login CONLogin group Ganymede + local the AAA authentication enable default AAA authorization exec default group Ganymede + local AAA accounting exec default start-stop Ganymede group. |
These 13 lines of configuration I have on our ASA 8.2
1 2 3 5 6 7 8 9 10 11 12 13 |
RADIUS Protocol RADIUS AAA server AAA-server RADIUS (inside) host x.x.x.19 timeout 30 cxxxxxxxr key AAA-server RADIUS (inside) host x.x.x.20 cxxxxxxxr key AAA-server SDI sdi Protocol AAA-server SDI (inside) host x.x.x.64 authentication AAA ssh console RADIUS LOCAL Console http AAA RADIUS authentication Console Telnet AAA authentication RADIUS LOCAL AAA authentication secure-http-client |
These 15 lines of configuration, I used previously to another organization that I worked at.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
AAA authentication login default line VTYLogin authentication connection group Ganymede + line of AAA. CONLogin authentication connection group Ganymede + line of AAA. AAA authorization config-commands AAA authorization exec default group Ganymede + authenticated if AAA authorization commands 0 default group Ganymede + authenticated if AAA authorization commands 1 default group Ganymede + authenticated if AAA authorization commands by default 4 Ganymede group. AAA authorization commands 15 default group Ganymede + authenticated if AAA accounting send stop-record an authentication failure AAA accounting exec default start-stop Ganymede group. orders accounting AAA 15 by default start-stop Ganymede group. AAA accounting network default start-stop Ganymede group. Default connection accounting AAA power Ganymede group. AAA accounting system default start-stop Ganymede group. |
Your contribution is very much appreciated and evaluated.
Try looking the GANYMEDE + Administration, report rather than accounting report.
Tags: Cisco Security
Similar Questions
-
I have purchased Adobe Design Standard CS6 2013 with serial number, but can't find the to no download on a new mac laptop. When I try and add the serial number to 24 digits on my account it doesn't seem to work?
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
My spellchecker of firefox doesn't seem to work; That's assuming that it exists at all. For example, when I misspell a Word when you compose an email using hotmail and I try to correct using the spell checker of hotmail, I get a message saying that I am using a browser that has of own built-in spellcheck. If it is integrated, how the hell can I find?
This has happened
Each time Firefox opened
Is as far as I know, always
You must install a spelling dictionary, only the US version comes with a dictionary.
https://addons.Mozilla.org/en-us/Firefox/language-tools/ -
I've updated my information of payment more than four times, but my annual creative cloud plan doesn't seem to work? It is said that it will update within 24 hours after I update, but it seems to never work.
Hi Nick, your prepaid subscription expired more than a month, then I recommend you to buy a new creative.adobe.com/plans plan
For questions about billing, it is best to contact the Adobe Support first to ensure that we can sort on the side account prior to troubleshooting, etc. Let me know if you have any questions!
-
I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him an Apple store. However, the phone doesn't seem to work. Also I don't have apple care more.
You will pay full price for a new iPhone.
Apple Care does not damage water still > liquid for iPhone or iPod is not covered by the warranty - Apple support
-
How can I remove the button from menu? The custom option doesn't seem to work for this.
How can I remove the button from menu? [This IChing looking for three line on the toolbar icon].
The tool bar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I would trade on the NoScript icon.
Hi, I can not recommend that you do, but if you are really determined, this article can help.
-
Hello
We tried the window. ResizeTo and window. Methods MoveTo using javascript. It doesn't seem to work in version 9.0.1. Please suggest any alternative.Thank you
AvinashThis is no longer allowed for security reasons (bug 565541).
See https://support.mozilla.org/nl/questions/880032
https://developer.Mozilla.org/en/DOM/window.MoveTo -
I'm used to be able to refresh a page by pressing the F5 key. With 4.0.1 which doesn't seem to work. Y at - it a different keyboard shortcut, or I can create a?
Try CTRL + R
-
On the side of my ear legt is stronger than the right side and I tried the L and R slider in the settings but it doesn't seem to work! Help, please! BTW, I have the iphone 6 sec more
Left *.
earphone *.
-
ASSIGNABLE button 6 doesn't seem to work.
I tried to affect 'assignable button 6' to 'steadyshot' on my FS7, but it doesn't seem to work.
Countermeasures that I tried:
Thinking that I might need to reboot the camera, I have it turned on and then turning off. I also tried to unplug and re - connect my connection the handlegrip LANC and swapping of lenses (all the Sony E-mount). I also tried other functions as peaking to assinging but no matter how hard or soft how I push the number 6, he's as dead as a dodo.Has anyone else had this problem or is there something that I'm not just doing?
Sorry everyone. I'm afraid that the culprit was myself. I expected a menu pop up and did not notice that the icon has been change to reflect the State.
Therefore, the button works very well - it was my brain and eyes (I didn't put my glasses on!) which were defective.
-
Satellite M40X-148: Microphone doesn't seem to work
Hello
My laptop model is SATELLITE M40X-148.
My mic has stopped working.I changed my microphone.
It doesn't seem to work. They worked well earlier.Could you get it someone please let me know how to solve this problem.
Thanks in advance.
Kind regards
SureshHave you checked the settings of the external microphone?
Go to the Control Panel-> audio devices & audio and on the Volume tab, click the Advanced button.
Then a new window should appear and you could see different volume controllers.
Please check if mute was not activated in micro controller
-
Siri doesn't seem to work, he won't answer when I hold the home button?
Siri doesn't seem to work, he won't answer when I hold the home button?
Have you checked to see if the settings > General > Siri is on?
-
EOS 1Ds Mk II rear wheel doesn't seem to work
Hello. My EOS 1Ds Mk II has a problem. The rear dial doesn't seem to work, that he will never change any setting in shooting mode. In all other respects, it works very well, but in M mode, for example, changes in command-line before shutter speed, but the back is zilch. Similarly, exposure to flash comp., comp. regular, both do not work with the rear wheel. Am I missing something? The power switch is on, but the camera behaves as if it was off. The dial works for the selection of the menu and move the menus.
Am I missing something? I have reset all custom settings and personal, reset the date/time clock, and the firmware is up to date.
I agree. Send it to Canon service. I think that they continue to work on the 1Ds Mk II, but not the 1 d Mk II.
-
[Can't press Ctrl +] to the telnet command, it doesn't seem to work?
[Can't press Ctrl +] to the telnet command, it doesn't seem to work?
Hello
1. have you made changes on the computer before this problem?
2. the computer is on a domain network?
Follow these steps to escape the Telnet connection.
a. to start a Telnet session
b, click the Start button, click Run, and type command prompt.c. type telnet {destination or IP address}
[(d) in order to escape the Telnet connection, type Ctrl +].
Also, please provide an explanation more detailed of how you try to get the command works and what you expect to happen.
-
Acer C720 Chromebook - drag - déposer doesn't seem to work.
I recently acquired an Acer C720 and drag / move (found this when you try to move a tab in Chrome) does not work. I went looking for the gesture and he said to hold with a finger and move with each other - it doesn't seem to work for me. What I have to put in place or it does not exist on all models?
I can turn on tap and drag within the parameters of Chrome (which is everything I wanted in a first time) - I don't know I should be able to move with two fingers, I'm a little afraid it does that.
Any advice? (other acts listed as how do scroll down and right-click work very well)
I was being so gentle with her, I only just realized you can 'click' on the mouse pad.
By experiementing, I found that you can also three finger roll horizontally in order to move between tabs.
This machine is amazing for the cost - knowing that now, I would have paid more.
Maybe you are looking for
-
Not able to upload some photos to iCloud
Hello. So... My library weighs 120 gigas according to the info in the Finder. However, after the purchase of 200 GB worth of space in iCloud and download my entire library, iCloud tells me that 90.2 gbs are used with Icloud library photo. At the bott
-
NSZ - GS7 will support a keyboard and a mouse?
I would use a keyboard full size and the mouse. NW Media Player will support this. If it is not in native mode, y at - it an application or download other SW to enable this?
-
Original title: Slverlight 5 update? I try to install llatest update of silverlight, but get a message "the feature you are trying to use is on a network resource that is unavailable" I already uninstalled the previous version of silverlight, run an
-
I installed Windows Server 2008 R2 Standard as a test version of an iso download got on the product site in Ms. In the meantime, I bought the software. Once the software has been delivered, I tried to activate with the key provided me with the softwa
-
Problem with Amazon app.
When I click on my Amazon icon on the bottom toolbar, the application is displayed for 3 seconds then disappears. I love Amazon and you want this feature on my new computer to work. Windows 8 on a new Dell computer