Acer Aspire One AO751h only detect key 2 GB Ram 1 GB

Similar Questions

• Does not open roxio Smartphones blackBerry Desktop Manager Ver 4.5 on Acer Aspire one

  When I try to open Roxio, Desk Top Manager V 4.5, it gives a message that my screen resolution should be set to 1024 x 768, but my Acer aspire One is only capable of 1024 x 600. It works fine on another laptop and my desktop computer. I really want to get my music and files jpg of my 8830 to this new laptop also. Does anyone know of a work around for this problem? Thank you.

  You can do it with windows Explorer, connect the device to the computer and open windows Explorer, and you can manage all the pictures and songs, because the device is detected as an external hard drive

• How many slots does memory have a netbook Acer Aspire One 721 MS2298?

  We have an Acer Aspire One 721 MS2298 Netbook with 2 GB RAM and Win 7 64 bit. He will perform better with 4 GB of RAM.

  How many slots memory has this netbook, and what is the maximum that can be installed.

  I have beleave to DDR3 - 1066 modules SODIM.

  Specifications:

  http://support.Acer.com/acerpanam/NetBook/2010/Acer/Aspire/AspireOneAO721/AspireOneAO721sp2.shtml

  System memory^{1, 4, 5,}

  Support DDR3 SDRAM dual channel with two modules soDIMM

  • Up to 2 GB memory DDR3 expandable to 4 GB using two modules soDIMM (for Windows® 7 Home Premium and Basic)6
  
  
  • Up to 2 GB of DDR3 memory at system (for Windows® 7 Starter only)7

• My CTRL key does not work on my acer aspire one laptop.

  My CTRL key is not working.both of them are not working.there is no dust inside or whatever it is else.im do not know if they are turned off.if they were, I don't know how to turn them on. I asked this question before but I forgot to mension that I have a laptop and its acer aspire one.a windows 7. someone gave me the answer for windows xp. It would have been helpful if my computer was an xp but it isn't.ive tried pressing both keys CTRL at the same time and then tested but the help of nothing.please. Thank you!

  I found this in another forum.

  "Here are a few ideas.

  1. try pressing the left and right CTRL keys at the same time and
  see if that release CTRL.

  2. go to start / settings / control Panel / Accessibility Options.
  Keyboard options.
  Turn off CTRL lock if it is enabled.
  If he solves and to avoid future problems, press "settings".
  Disable "Press modifier key twice to lock.
  Turn "disable automaintenues keys if 2 key at the same time."
  Or disable "use shortcut".

  3. clean your keyboard.

  Clean the laptop keyboard
  http://www.computing.NET/HOWTO/simple/keyboard/

  Is that any help?
  Hummer.

  Name of the original author is the basis of the solution...

• Acer Aspire One D257-13450 fixed size window too big for the screen

  I have an Acer Aspire One D257-13450 running Windows 7 Starter Edition, and when I open some windows (e.g. Brother MFC 990CW control of scanning parameters), the window is too large to be completely displayed on the screen. The bottom of the window is hidden under the bottom edge of the physical screen.  The window can me moved around the screen as usual but I can't move it to the top of the screen enough to see the bottom of the window - this is where the selection of options for this window buttons. This particular window has only a close button in the upper right and not the usual buttons Minimse or restore down. I have connected a monitor external and also adjusted the screen resolution and nothing doesn't affect the ability to resize the window and get off at the buttons of options I need. I was able to guess the buttons under the edge of the screen by using the tab key to tab through all the options in this window, but it is not very satisfactory. Any suggestions please?

  Many netbooks with Starter have only a 1024 x 600 screen - if the program needs a minimum of 1024 x 768 it may not work or may not display all. But it wouldn't be because of the netbook, Windows.

  You can try this modification to allow higher resolutions:
  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

• Reinstall Windows 7 Starter Acer Aspire One D257

  I have an Acer Aspire One D257. It has no built in DVD / Draw.  It came pre-installed with "windows 7 starter" I don't have a disc of recovery etc for this program. Last year I used widows any time upgrade to install "windows 7 Home premium upgrade," which has been installed via the internet by a Microsoft technician. Then I had the upgrade key sent to me by e-mail, what's left.  Later, I had problems with the computer and decided to windows 7 from re - stall. I visited the Microsoft site and downloaded the program on a USB Home premium windows 7 (32-bit).  I have this installed successfully in the D257 of Acer. But I was unable to activate with my key upgrade Windows 7 Home premium, for some reason any he does not accept it?  So now that I have a dilemma, I have a key that has cost about £76,00 for the upgrade that seems unnecessary.  Also, I am unable to revert to the original "windows 7 starter", as the system restore will allow me only to come back to a point in time that is after I installed windows 7 about 2 weeks ago. How can I fix this without having to buy another program again. P.S. I use an external DVD draw if I need. Can anyone help please.

  Original title: bobgoodman1706

  Hi thanks for the info. Unfortunately, the recovery was wiped out when I installed the new windows 7. However, I have now solved the problem by buying a new product key that has been a success so now have windows 7 home premium installed and fully active. Thanks to everyone who tried to help me.

• WINDOWS 7 STARTER/ACER ASPIRE ONE UPDATE HELP

  I have a brand new Acer Aspire One Netbook.  It is brand new, so after I did the initial installation for the new netbook, Windows 7 is an update.  When the update is complete, it blocks my netbook.  I get a black screen and a cursor only.  The only way I can fix it is to restore back to the factory and start all over again.  Anyone know why this is happening or that updates 62 is the cause? I basically can't update my OS until it is fixed or know where it is and it can check the updated list.

  You say you have 62 updates. The only true way to know what update is the cause of the problem is by installing one at a time.

  I was looking especially the optional updates as shows drivers etc. If you are offered drivers, you should consult the manufacturer's website to see if indeed you really need the updated drivers.

  TaurArian [MVP] 2005-2011 - Update Services

• Reinstall Windows XP on Acer Aspire One - computer did not come with a recovery CD

  How to use the product key that came with my Acer Aspire one to reinstall Windows XP without CD?

  Hi MariaMouzes

  You can restore your computer configuration using the procedure described in the link below.

  How can I restore my system using eRecovery management program?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12869

  Or you can buy the recovery media by hint at the link below.

  https://store.Acer.com/store/Acerna/DisplayDataValidationServicePage

  Good luck.

• Acer Aspire one 721-3922

  We know what the maximum memory taken in charge by the motherboard of an "Acer Aspire one 721-3922'?

  It has two slots of memmory.

  Maximum size and type by slot would be extremely useful.

  Currently the a slot has DDR3, but I watch a youtube where the author stated that "according to acer support" it will also accept DDR2.

  Thank you

  Your laptop supports up to 4 GB - DDR3 - 1333 MHz (2x2gb). Only of DDR3.

  OS: Windows 7 Home Premium - 64-bit

  Here are the bars of origin:

• Windows 7 will not update on an Acer Aspire One 722

  Hello, I have an Acer Aspire One 722 - A0722 - 64-Bit - I used the laptop and installed Windows 10 on it and it came to a crawl.  I decided to reset the computer to factory settings.  He succeeded, however, I can not install the updates of Windows.  I am running Windows 7 Home Premium with Service Pack 1.

  I tried to install updates for the first time without success and tried all the solutions I could find online.  I searched through forum after forum and tried all of the solutions that I found and not luck.  I installed several downloads, as recommended by Microsoft and not solutions.  I had subsequently to error code 8008005 and 0x8024402C and 0x8024001e.  I tried again the solutions and nothing has worked.  Most of the downloads that I did from herre: https://www.microsoft.com/en-us/download/windows.aspx

  I finally install CCleaner and updated to Explorer 11 I downloaded directly from the Microsoft Web site.  Who succeeded.  Nothing else has.

  So, I wiped out the computer again and reset to factory settings and am at square one.  I installed NOTHING else at this point expect try Windows updates.  All I get is the progress monitor to continue to operate.  It was 'running' and research updates for nearly 30 hours and nothing.  It still reads ' check for Updates ' and nothing else.

  Any help would be appreciated as I know what else to try.  This seems to be a common problem with no real solution at this moment that my search Google told me.

  Two screenshots are below.  Thank you for any help or advice.  At this point, the computer is basically unusable and it's very frustrating.  I spent hours and hours and hours and nothing.

  Thank you all and well be.    Brad

  

  

  Hello

  In fact, I found a solution that works!  I found this on another forum... Here is the solution...

  Hi I had this same problem, but it can be fixed easily, fist you need to do this update https://www.microsoft.com/en-us/download/details.aspx?i... There for 64 bit, before this, you must disconnect your wifi and LAN and uncheck the box you run internet settings where will be automatically connect when you start windows, and then restart your PC. Once the back is operational, run the update you just downloaded (make sure do not connect to the internet until the update is complete.  Reset.  Now that you have made, you must update the update here is the link to the DLhttps://support.microsoft.com/en-ca/kb/949104. Now, when it comes to restart your PC and go to update and this time it should find updates, can still take a little time, but usually get fist couple in 10 to 15 minutes.

  PS - It analyzed more than an hour before he found updates and started to download. Yes!  It worked... I also downloaded the downloads on a flashdrive from my desktop PC and installed on the Acer from the USB key.

  Thank you and well being.  Brad

• Acer Aspire One 532H - 2DS max ram?

  So, what is the maximum ram supported of the Acer Aspire One 532 h - 2ds?

  According to the results of google, it of 2 GB, which I just installed a 2 GB key, but the BIOS always reports that 1 GB...

  Any ideas?

  Hello...

• Acer Aspire One d270 ram upgrade

  I recently bought a netbook Acer Aspire One D270-1806. It comes with 1 GB of Ram.

  I'm looking for this move to 2 GB. I could not find a service manual for this netbook.

  Can someone point me in the right direction?

  I've seen some posts saying that the upgrade of ram D270 was deemed not user replaceable. Although Acer may have tried not user replaceable; It is altogether. It was so easy. I went on the standard of 1 GB of Ram for a 2 GB key in about 10 minutes.

  Here's the video I used:

  http://www.YouTube.com/watch?v=vEcIer28aNc

• Acer Aspire One model ZA3 (WIN XP) needs updated drivers

  I'm still enjoying my Acer Aspire One manufactured in 2009 running Windows XP Edition family, but am running into the faults caused by ancient drivers.

  A single analysis indicates that I need a driver updated GlobeTrotter MO40X but where and which?

  Acer computers can update their own drivers somehow?

  Thanks to anyone who can help me

  Where can I get information on the model ZA3?

  It's actually an Aspire One AO751h.  The drivers are available on the page drivers.

  I don't know what you are "scanning", but the "GlobeTrotter" MO40X is not a driver for an Acer system package.

  All the available drivers are on our page drivers.

• Which applications and drivers get I need once I clean installed my Acer Aspire One 725 Windows 10?

  I already upgraded my Acer Aspire One 0725-10 Windows.  However, it seems to be an incompatibility with some of my courses installed applications and drivers that several questions.  Microsoft support reviewed my concerns and concluded that a clean install of windows 10 would be the way to go.  Before doing this, it would be probably good get applications and drivers that will be needed after the installation.  If anyone can provide me with a list, it would be greatly appreciated.

  Most of the drivers will be updated by windows update when connected to the web.

  on the applications, I think that Acer launch Manager is required to use the Fn keys:

  http://global-download.Acer.com/GDFiles/application/LaunchManager/LaunchManager_Acer_8.00.8101_W81x6...

  but... I read some discussions on the issues on windows 10 with Acer launch manager, worth a try to install.

  to check if all the drivers are installed and work properly, after verifying that all updates are installed:

  Key of the Windows logo + x
  Click on Device Manager

  If the yellow exclamation point is present
  Double click on it
  Choose the tab "Details".
  in the drop-down list, select HardwareIDs
  Click the first value and paste here

• Is there a method for re-flashing a BIOS corrupted for Acer Aspire One D260 (D260-2Dwk)?

  My what Acer one D260 does not start in Windows, I get only a black screen when activated. I downloaded the BIOS support web page, but I can't flash as the computer shows nothing, I can't get into BIOS or Windows.

  So, I would like to know there is a way to Flash the BIOS again in these circumstances (as I found for Acer Aspire A110 or A150, but the method found in this forum does not work with the Acer Aspire One D260.

  If the system does not start, we do not have a method available for the users final Flash the BIOS.

  We suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support