Similar Questions

• How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

  How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

  Don't know what your problem is - log on to Skydrive and recover the files that you need them, or download the app to Skydrive and they will all be uploaded at the same time.

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• SSD not detected in the Bios after stopping

  Hello

  I bought a SanDisk SSD II specially 2 days.

  I plugged it in the first my motherboard SATA port and a SATA power cable. Then I started up my computer and installed Windows 7 Pro without any problem on the SSD, but after I shut down the PC, the SSD is not longer detected in the bios.

  The thing is that if I enter the BIOS, the SSD is not detected the first time, but if I restart the computer it will be detected on the next launch.

  Identically, Windows, if I do a "reboot", everything works fine, but if I make a stop, then SSD will not be detected the next time I start the computer.

  Do you think I should return the SSD?

  Thanks in advance

  I fixed it by choosing the AHCI mode (instead of IDE).

  FYI, my motherboard is an Asus P7P55D.

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer does not start if the 150 GB Toshiba HARD drive is connected

  Hi, I bought an external hard drive of 150 GB PX1220E of pc world a few days ago. When I start my PC it sticks on the splash screen, and I have to unplug the usb cable and restart the pc, then connect the drive again to use it.

  Is this an error with the drive?

  Hello

  I googled a bit and it seems that it is really a Toshiba HDD.
  However, for me, this is NOT a malfunction.
  The external HARD disk is connected before starting. So I think that the computer is trying to boot from the external HARD drive and so it freezes.

  You should check the boot order in the BIOS and connect the HARD drive after you start the procedure.

• How can I keep windows genuine in my laptop after formatting hard drive?

  Hello
  I have a dell laptop l502 with a premium windows home instlled in hard drive 7. now I need to format the hard drive, but how can I keep my windows 7? is it possible to save or I loss my windows genuine?

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  This will allow that you reinstall Windows 7 while maintaining a true.

  Make sure that you back up your data before reinstalling:

  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
  http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/

• Can not activate my cell phone after replacing hard drive

  I can't activate the computer

  Also the error message when I try to download content

  Hi Trevor,

  What is the accurate and complete error you get when you try to activate Windows 8?

  If you have made significant physical changes to your PC, like replacing your hard drive or motherboard, you will need activate Windows by phone. To learn how, go to the article of the product activation .

  See also the link: http://windows.microsoft.com/en-US/windows-8/why-activate-windows

  Post us the results after trying the steps above.

• How can I reinstall the CS5 after reformatting hard drive?

  I'm teaching for CS5 and Photoshop Lightroom since 2011 license. They are only installed in a computer that needs to have completely reformatted hard drive. What are the steps needed to ensure that resettlement work?

  Thank you

  Soledadcv please see http://forums.adobe.com/message/5418120#5418120 where the oldest download section titles of software Adobe is discussed.

• Not able to install Windows after formatting hard drive

  I am not able to install windows on the computer. I have Dell Inspiron N5010.

  Put under alert.

  -Windows cannot be installed to disk 0 Partition 2.
  Details: Windows cannot be installed to this disk. This hardware may not support booting to this disk. Make sure that the drive controller is enabled in the computer BIOS menu.

  In the BIOS

  SATA - AHCI mode

  Hello

  When you formatted the disk you also partition?   Also, what version of Windows you are trying to install the system, and what media you are using to install it?

  Have you entered THE system BIOS and changed the SATA settings to see if you can get Windows to load on this subject?

  Todd

• Lightroom will not start with the catalogue of external hard drive

  Switching computers (Mac), I've updated Lightroom 6 4. He opened with an old catalog that won't only up until 2013, which is on an external drive. I tried to revive with my current catalog, and I get a message: Lightroom catalog cannot be used because the parent folder "/Volumes/ (name) / (name) of the hand catalog / (name) of the hand catalog" does not allow the files it contains. El Capitan has more patch file permissions in disk utility and, in addition, this catalog is on the same drive as the oldest catalogue is on. Any ideas?

  Sharing and permissions of the older cases seems to be a problem with El Capitan.  I tried to copy a folder to an external drive. This file was created and copied using the Mavericks.  It would not copy. Said, I have no privileges, I think that the message. It was all in Finder NOT lightroom.

  So, I clicked on the folder parent in question;  and then did you read the information.  In the result pane, I changed the permissions to "everyone".  It worked.  Then once it has been copied, I changed it back!  It takes a few minutes to update and warns that it can not be cancelled?  Don't know what it means until I am able to change permissions back.

  In any case; Save then try this. I said back first?  Yes.  YMMV.

• Reinstall the CS6 after reformat hard drive

  I see my serial number in my products and services - how to re install the software?

  Just like the last time - download the installer of your page or the trial version and activate it with your serial number.

  Mylenium

• HARD drive not detected in the BIOS on Satellite A215

  Hi all

  I could use to solve this problem: bought this laptop computer without a disk of the auction. Installed again 2.5 inches HDD SATA 250 GB, which was not detected in BIOS and also not detected when using a MS Vista installation disc. When trying to install Vista, get a message no drive seen HARD and demand for pilots.
  I flashed the BIOS with version (2.0) of lates without problem through the CD drive, but still no detection of HARD drive.

  The drive partitioned and formatted NTFS without problem by using another computer and USB SATA adapter using the command line method. Just for additional verification, I went on the new HARD drive to an extra 2.5 "SATA HDD used for backups, but that the HARD drive has also not been detected.

  It is not a "compatibility" option in CMOS to select SATA or Auto, etc..
  There is not a second HDD, so this isn't a question of slave/primary. There are no jumpers on the new HARD drive.
  Set the CMOS settings 'by default' does not solve the problem.

  The SATA connectors on the HARD drive and laptop computer are in perfect condition.
  Also, the drive is not detected on the laptop connected via USB to SATA Adapter, but of course there is no OS installed to support this connection.

  In any case, I just can't come up with any more ideas to try.
  Any suggestions would be really appreciated!

  Best,
  Glenn

  Hello

  The BIOS should recognize the HARD disk even if the SATA mode would be compatible or AHCI. This should not affect the recognition of the HARD drive.

  You said that you have tested the condition of the HARD drive and it's ok, so I guess that it s no disc HARD question.
  Hmm, you could try to format the HARD drive once more and then connect the portable computer HARD drive.

  Another idea: Remove/Disconnect the CD/DVD drive and then connect the HARD drive to the SATA connector.
  If it does not, then I recommend to test another HARD drive, otherwise if the new HARD drive would not work, then a SATA controller may be defective.

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2

• IPhone 6 is not detected by the Pc and itunes...

  I'm suffering from a strange problem, my iphone 6 is not detected by my laptop or even itunes, but its loading... I'm trying to connect to my old iphone 5 and 6 and its works very well...

  Could you please help me on what I can do with this phone, I already searched a lot and try every thing like restarting the laptop etc etc, but nothing works at all...

  Appreciated your kind reply...

  It may depend on your OS of the computer. What computer OS do you use? The latest version of iTunes works with some versions of OS X. either way, you can see this support document. If iTunes does not your iPad, iPhone or iPod - Apple Support