Acer recovery has no option to reinstall acer windows 8

Similar Questions

• for vista is an option refresh/reinstall as windows 8

  Hai for windows vista is an option refresh/reinstall as windows 8. I think that my 'C' drive has a lot of junk files.  I just wanted to keep my own os disk.

  Hi Sara,.

  In Windows Vista there is no option to refresh your computer how it is done in Windows 8. However, you have an option called Inplace upgrade.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099/en-us

  On-site upgrade warning: before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Write to us at the State of the question. We will help you to come.

• HP Laserjet MFP M127fn Pro: Cannot install drivers for printer HP Laserjet Pro MFP computer M127fn on the new laptop from acer windows 10

  This is my third attempt failed to install new drivers for the Laserjet Pro M127fn MFP printer on my laptop Acer windows 10 OEM. I used the HP installer with no customiztion of components (the default recommended) with USB cable connection. It goes up to the product configuration step 99% and then gives the error: "an installation operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run Setup again. If the problem persists please consult product suppprt web site of your product... » »

  I also tried to use interface devices and printers after restart the computer by selecting Add Printer option, it seemed to have installed the printer but it couldn't print the test page. Any help will be greatly appreciated.

  Thank you.

  Hello

  Printer navigate through the Setup menu using the left and right arrows and locate the Service menu.

  Search for HP Smart Install option in the Service menu (it may appear and may not be no depanding on the version of your printer), if it is there, select Disable for HP Scmart Install.

  In your PC click on the right button on the start menu and select Control Panel, then select View devices and printers.

  Do not forget to remove any icon (the M127 or any other driver HP) HP printer by clicking the icon and selecting Remove the device, and then restart the computer.

  Go back to the devices and printers any queue remains left by clicking once, then select press the print server properties in the top menu bar.

  Select any listed HP printer driver and select Remove, make sure to select the 2nd option to delete the printer and its driver package.

  From the control panel home, type "change device Installation settings and open the option, then select No and confirm with OK."

  Now, try to reinstall the most recent drivers and check for the difference.

• Ive reinstalled my windows xp through the recovery on my computer several times trying to change my language to English... but it keeps French

  Ive reinstalled my windows xp through the recovery on my computer several times trying to change my language to English... but it keeps French

  Hello

  1. What is the base language that is installed on the system?

  You must install the English language pack.

  I advise you to review the eligibility criteria for the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows/language-packs#lptabs=XP

  Windows XP has Language Interface Pack provides a version translated from the dialogs used more widely, menu items, and help content. You may be eligible for the same function of the XP license.

  After you install the language pack, you will need to change the settings on your computer below:

  a. in the menu start standard Windows XP, click Startand then click Control Panel.

  In the start menu classic Windows XP, click Start, click settings, and then click Control Panel.

  b. double-click regional and Language Options.

  c. click the languages tab and then click details under "input languages and text Services.

  d. click Add under "installed Services", and then click the language you want to add and the keyboard layout you want to use for that language.

  e. to configure the settings for the Language bar, click language under "Preferences" bar

  You can also see the following article for more information:

  Regional and Language Options Overview:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_custom_workspace_regionalsettings.mspx?mfr=true

  Configure Windows XP for multiple languages: http://windows.microsoft.com/en-US/windows-xp/help/setup/set-up-multiple-languages-windows-xp

  HOW TO: Use the language bar in Windows XP: http://support.microsoft.com/kb/306993

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• What happened to the recovery of the Options software Dfault factory to win 8.

  We recently bought a C50 - B Satellite laptop for one of our boys to use at school (since they decided that the laptop replaces the need for text books) and needed to be implemented. It will be his only machine and it will also use to play games and surf the net. Past experience with his games, he done always something that slows down the system and finally makes it almost unusable, a State that I can't leave because it is necessary for school. I thought I would dualboot, one system for school only and the other for its games so that if its OS is messed up games he can still do his school work on the other OS.

  Microsoft say that, since the OS will be installed on the same computer twice, but that an installation can be run at any time that it does not violate their license agreement, so no problem with legal issues.

  System recovery, in Win7 under "Recovery of Factory Default Software" has three options.
  1 get out-of-box state.
  2 recover without changing the hard drive partitions.
  3. recover a custom size partition. The memory option 2 or 3 allows a 2nd installation of the operating system even though I think as the BCD needed some changes to both work.

  My problem is that the C50 - B comes with Windows 8.1 and the recovery procedure and options have changed. Win 8 / 8.1 seems not to have option 1, or an equivalent, as it says Win 8 s reset is similar to the recovery of Win7s, but this removes the partitions and the existing operating system, so I can't get two operating systems on the computer by using this method.

  Does anyone know a way to dual boot to help to win 8 / 8.1 recovery partition?
  OR is it possible to modify the script to allow options 2 and 3 of Win7?

  Win 7 was not ideal for this, but the deletion of these two options, it is difficult to use other operating systems such as Ubuntu, Linux etc.

  I would like to see the recovery for the other operating systems partition, do not assume that it will be the only OS that requires the user on the machine.

  Help with this will be appreciated.
  Thank you.

  Windows 7 recovery option is different of options of recovery available in 8 Win / Win 8.1 but of course possible to use a dual boot system (Win 7 / Win 8.1) on a laptop computer.

  Here are a few beautiful /TSB FAQ I found on the Web from Toshiba site on the process recovery running Win 8 / Win 8.1

  How to recover a portable device or Tablet from Toshiba with the HDD recovery procedure
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Windows Recovery 8 & repair
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  Steps to install Windows 7 on a unit of Windows 8
  http://APS2.toshiba-tro.de/KB0/TSB2B03EX0002R01.htm

• has had to use the recovery disk to restore all applications, including windows xp... trying to get windows update but get the error message. any idea on how to get the updates

  Drivers for computer laptop all corrupt had to reformat and do recovery disk.  lost all updates to windows xp.  try to get the updates, it will scan I get this message... can someone help.

  [Error number: 0 x 80244019] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  I am pleased to have been of assistance.

  Tricky

• We try to upgrade Vista Home Basic on an Acer Windows 7 but cannot because there is not enough space on the hard drive.

  We try to upgrade Vista Home Basic on an Acer Windows 7, but does not because there is not enough space on the hard drive C. I have another drive that is empty, hard drive called D data and will not go to it. What I can do. I just spent $ 125 for this upgrade.  Thank you

  original title: try to upgrade to Windows 7

  Hello

  you are posting in the wrong forums

  These are some Vista Forums

  You can read this information to see if your machine is compatibile Windows 7 and repost in the correct Windows 7 forum (link below)

  so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• I'm on mac, I mind open it because he says that preferences has been deleted, I reinstalled it twice and it does not

  I'm on mac, I mind open it because he says that preferences has been deleted, I reinstalled it twice and it does not

  Press Command-Option-shift and launch Photoshop. When you see the dialog box to delete the settings file, release the keys, click Yes and I hope that the preferences will be recreated.

  Gene

• Why Apple photo app has no option to rotate a recorded video? This is a big disadvantage and watch out!

  Why Apple photo app has no option to rotate a recorded video? This is a big disadvantage and watch out!

  I use Iphone 6 version 9.3

  You hear " Apple photo app is not an option to rotate a recorded video?"

  We shouldn't speculate on the motives of Apple in these forums.

  Send a feature request to Apple: Apple - Photos - comments

  As a work around using QuickTime on your Mac to rotate the video or iMovie.

• "Partition recovery has been deleted" Message in creation of recovery media

  HP Pavilion 2205tx - C5j09PA #UUF G4

  Windows 8 64-bit

  "Partition recovery has been deleted" Message in creation of recovery media.

  I bought my new HP pavilion laptop G4 two days ago only and has not changed anything in the two players named drive C: for windows and D: for HP Recovery.

  now, I want to do a recovery with the HP Recovery Manager software disk.

  but it shows a Massage: "Recovery of Partition was deleted" Recovery Media creation section.

  in the recovery Partition my computer is almost full (3.26 G 25.5 G is free). so I think that there are current recovery files.

  I have not access to HP to buy recovery disk or call support.

   

  Thank you

  I don't know why your PC is saying your partition disappeared - you're right, it seems to be missing. I know that if you use the wizard to help to make your recovery disks backup copies and then ask him to remove the recovery partition to give you more space on the hard drive, it will remove the factory image HP of Windows 8 for the recovery partition and let the normal Windows repair tools.

  There are tools, but which allow you to create your own recovery partition full with these tools of Windows repair and a new image of your instalation so that you can restore from that. You can use this tool: Windows 7/8 - creator of Partition Recovery OEM available here: http://forums.mydigitallife.info/threads/21978-Windows-7-8-OEM-Recovery-Partition-Creator but it's a lot of work and it would be faster and more easy just for your data backup and restoration of your HP recovery disks made you from the support Assistant. If you did not the disks, HP can opt to send you a copy... they do not normally this but I read that some people have luck to get a free copy of HP media... otherwise, they want you to buy recovery disks ($40.00). I guess it depends on the exact terms of your situation.

  An alternative is to use Macrium Reflect Free Edition to ghost or clone your system. You can then restore your entire system even with your custom programs installed, to the exact state it was when you made the backup image. (this may take several dvd) I suggest that you go down that road because your system with Macrium Reflect restore is much faster than restoring from the HP recovery discs. Even if you do not get another copy recovery disks, you must use this tool to make another backup that you can customize to your liking. Your re - installs will be faster, they will already have your chosen installed software, and you will save wear on your HP recovery disks.  You can then delete the recovery partition to regain this space on your hard drive (since you cannot access in all cases, you will not need this space being taken up).  BUT... you cannot restore Mode UEFI which is what HP comes with. You have to go into your Bios settings and switch in the Legacy Bios mode (which disables the secure boot) FIRST or else the Macruim recovery boot disk will not load to install the recovery image. After the system re - installs you can go back into the bios settings and disable bios Legacy and reactivate if secure boot you want. (Windows 8 charge mode UEFI bios active secure boot or Legacy mode... it's your choice.) UEFI mode will load faster, but it will cause problems if you want double boot the system with another OS) hope this helps.

• For Windows XP, how to get rid of "this screen saver has no option that you can set!

  I want to change the screen saver, but whenever I click the setting button, I received the message: «this screen saver has no options that you can set»

  Although several screensavers just do one thing, some of them can be customized.  For example, '3D text' screen saver allows you to choose the text, the text color, size, etc.

  For most screen savers, just choose one from the drop-down list and then click 'OK' - not the button "settings".

• You need to reinstall the windows XP Backup program that has been deleted by ardja software.

  You need to reinstall the windows XP Backup program that has been deleted by ardja software.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/302894

  It will be useful.

• In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA.

  Internet TV in Windows Media Center

  In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA. I checked the language settings and location, and they are set for English and the USA. I am running Windows Vista. Any help would be greatly appreciated.

  Barb thanks for all your help. I do not have it work, but I've upgraded to windows 7 and now it works.

  ~ James

• My installation disc for windows vista has an option "fix." This option allows to reset lost passwords?

  original title: repair windows

  My installation disc for windows vista has an option "fix." This option allows to reset lost passwords? If yes how?

  Hi Martine regina,.

  We will not be able to reset the password by using the option repair; you will need password reset disk.

  For more information on the same, you can check the link below:

  What to do if you forget your Windows password:http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-you-forget-your-Windows-password

  Create a password reset disk:http://windows.microsoft.com/en-US/windows-vista/Create-a-password-reset-disk

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help! I was getting along fine with windows live mail when unexpectedly there no uninstall, no option to reinstall open.__After.

  I thought I would be ok to uninstall then reinstall but after uninstalling, the installer says I already live mail installed and there is no option to reinstall. I deleted all the files that I can find regarding this & used a registry cleaner, but always the same result. I have a machine without virus & spyware, Win7 Proff Os.  I'm desperate!
  Valuable emails with reception details etc are all lost!
  What can I do to restore Windows live mail?
  Regards Richard.

  "Win7 Proff Os."

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner