Error-310130 NMEA for GPS
Hello
So I try to extract data from our GPS unit and I keep getting errors causing my code to stop execution of how I wired it.
I said error code I get (look at the link below), "the input text does not contain any of the data points GPS get GPS data VI returns."
http://zone.NI.com/reference/en-XX/help/372983C-01/lvrobogsm/robo_error_codes/
The NMEA string below you can see that it is empty and not accept... All these sentences that I get are empty, guys do you know why? I'm doing something wrong? I put probes after the cluster to read: latitude (degrees), longitude (degrees), etc... Thers having no data...
$GPRMC, 042041.539, V, 120314, N * 44
^------------------------------------------Void
Do you know guys what could be my problem? Any help is greatly appreciated.
-Chris
Nevermind I figured it.
Check out these links for an explanation:
http://wiki.OpenMoko.org/wiki/Getting_GPS_console_output_with_gllin
http://wiring.org.co/reference/libraries/NMEA/NMEA_gprmc_status_.html
I get my GPS unit Sub packages because, probably, I'm in my EE building during this test that really thich cynder-block walls. Therefore, it can not find a satellite to connect to. It is in the speculation, so I'll change my error code not when he sees this V and see what happens when I go outside. I'll post my findings for those who run into the same problem in the future.
Thank you!
-Chris
Tags: NI Software
Similar Questions
-
Numbers gives an error of syntax for all equations
I don't know what is happening, but I keep getting errors in syntax for multiple equations and no matter where I put it or how, he always gives the syntax error. Example B2 has 500 in there. Enter B3 B2x2 and it gives an error of syntax instead of 1000. I leave numbers and re-open the file with the same results. I even opened a new worksheet, and when you enter anything except the Scriptures, I always get the syntax error. It seems that there is something wrong with the numbers himself. Can someone explain why I can't use the formulas at all. They used to work in the past, so I am confused, what can happen.
Salvation of,
Did you B2x2 = or = B2 * 2?
Number change * to x, but seems not to recognize x as the multiplication operator when he entered directly.
Kind regards
Barry
-
error code 80070673 for windows update for vista
error code 80070673 for windows update for vista
Hello Jwisetoyo,
Thank you for your message. Please click HERE for a possible solution to your problem.
See you soon
Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Error Code 8024200d for KB970430, KB972145 and KB981793 KB967723 updates.
Hello!
I get error 8024200d code for KB970430, KB972145 and KB981793 KB967723 updates.
I ve formatted the primary HD after having been infected with the "AntiMalware Doctor" - virus and nothing kept the old full Vista Edition installation. I installed Vista Ultimate again once and successfully installed all updates offered by Windows Update. After that, I installed Norton 360 v3.0 without any problem. I continued to install Office Ultimate 2007 and all updates offered by Windows update. Once again no problem.
After this Windows Update Agent 7.4.7600.226 were installed successfully. Then, the following facilities have been attempted:
Update for Windows Vista (KB972145) - failed.
Update for Windows Vista (KB972145) - failed.
Update for Windows Vista (KB981793) - failed.
Update for Windows Vista (KB971644) platform - success
Update for Windows Vista (KB967723) security - has failed.
Updates failed have been tried several times that it recharges but don't settle. Then an other update have been installed successfully:
Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) - success.
Previous updates failed tried again several times but all failed once again. The computer recognizes the updates available and try to install them when I turned off the computer, but not luck.
What can I do to fix this?
Computer:
Intel P4 3.0GHz
2.0 GB RAM
Windows Vista Ultimate 32-bit (with SP2 KB948465 and some updates after that)
Office Ultimate 2007 (with 2007 Microsoft Office Service Pack 2 (SP2) suit)
Norton 360 v3.0
(TM) 6 update 21, Adobe Flash Player 10 ActiveX/Plugin
Thank you!
Marcus
Thank you for your time Halima S!
I tried what you suggested but unfortunately it has not worked for me this time. After giving the complete reinstall of Vista, everything seems to work fine when it comes to the OS.
Now if only slightly damaged Office Ultimate 2007 DVD would work as if by magic...
Thank you!
Marcus
-
I get the error code 646 for KB2092914 on a Vista Home, I installed the 'Fix It' and he came without any problem but yet he will not yet installed this important security feature: can someone help me with this, it seems that I searched for hours! Thank you!
What FixIt do you mean?
Try this FixIt please:
http://support.Microsoft.com/kb/2258121
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
I get an error code 0xD59 for the update of Service Pack KB2463332? Then he wants to resart my computer for an update failed? Why?
Hello
Click on the below mentioned link to manually install the update on your computer.
Microsoft SQL Server 2005 Express Edition Service Pack 4 for Windows XP.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=184After you install the update, restart your computer and check if the problem is resolved. -
I come with a message "error opening file for writing" C:docume~1\user\LOCALS~1\Temp\OpenCandy\OCSetupHlp.dll, as I am trying to install a program.
Any ideas what is happening?
Thank you
Hi and thanks for your time.
The program was an application to create your own music
I don't have any problem installing other applications programs...
The solution was a scan with malware bytes who discovered infected with the registry data.
So I deleted it and after running a lot on the line scans, I deleted the program, I wanted to install.
Everything is still better then...
-
How can I fix error 8007371c code for "Cumulative Security Update for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2936068).
Melvin,
Please contact the Microsoft Community.
I only see the answer from here-
Let us know if you have problems with Windows in the future.
-
get them error code 8024001 for two weeks now can't get rid of it
get error code 8024001 for two weeks now can't get rid of it, and then try again to saying
Hello
When exactly do you get the error message?
I suggest you try the steps from the following link:
Windows Update error 8024001
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024001b -
receiving error code 39 for dvd, driver will not load.
replace corrupt cdrom.sys
small management business of vista 32 bit. receive error code 39 for dvd. driver will not load. I tried to uninstall. same question on re - start.
I tried regedit suggestions. UpperFilter deleted, no lower filter exists.
In addition to the above on the excellent advice, cdrom.sys is not corrupt.
-
HelloW everyone,
I changed my name to the laptop and now every time I have lunch Planner task, I receive the following error message:
"An error has occurred for task reminders - portable home. "Error message: the specified account name is not valid.
I also have the problem with restore points, so these two issues relate to eachother? How can I solve the problem of the user name.
Any suggestion and help appreciated
Hello
You can check out the link and check if it helps.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry -
Error Code C800044E for Windows updates.
I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.
Hello
1. all the troubleshooting steps have followed so far?
2. the updates could not be installed?
3. what fixit did you run?
4 have have there been recent changes made on the computer before the show?
I suggest you to follow the steps mentioned below and check if it helps.
Method 1: Put the computer in a clean boot state and try to install the updates.
http://support.Microsoft.com/kb/929135
Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.
Try to download the update and install.
Download Center.
http://www.Microsoft.com/download/en/default.aspx
Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 3: How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Then try to reinstall updates.
I hope the information is useful!
-
error code 646 for the updates of Microsoft office
error code 646 for Microsoft office updates KB949710, KB951550, KB973593, KB950130, KB951944, KB973704, KB974561. Help, please
Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2
Read the info on the above link to error Code 646.
With the compliments of: David_O - Support Engineer
This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2
Method 1: Save the Windows Update files
1. click Start and type notepad in the box start the search .
2. click on Notepad in the programs list.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S1. in Notepad, on the file menu, click on record under.
2. in the list record under , click all files.
3. in the file name box, type register.bat.
4. save the Register.bat file to your desktop.
5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.
6. try to install the updates again.
Method 2: Download and install Windows Update agent
For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not help:
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include this error Code, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon
Mick Murphy - Microsoft partner
-
Microsoft maps for GPS tracking devices
Microsoft maps for GPS tracking devices. When you update maps for vehicle LANDSEAAIR location services. The current map is 1 year old?
I bought a VICTORIA, tracking device. The maps are provided by Microsoft. The current map view is at least 1 year old. When they are to day?
I looked for a good time on the Microsoft site and ouldn can't even find the old map from 1 year to download. I don't know when or if they update the cards (or what cards they use). I couldn't find references to their own map products (such as Microsoft Streets and maps), but nothing for basting device enjoys or LANDSEAAIR.
O suggest you try to contact Microsoft (well sponored and managed on the basis of Microsoft - this isn't really a Microsoft Forum - in the management, nobody comes here who can answer a question like that). Try contacing Microsoft using one of the options here: http://support.microsoft.com/contactus/cu_inventory?ws=support. I'm not sure which is best - perhaps a last on the right where he manages ' Con't find the information you need. "
I hope this helps (although I really didn't anwer your question).
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
When I open the Task Scheduler, I get the following error message:
an error has occurred for the realupgradelogontasks-1-5-21-2172834406-3963835389-1001 task. error message: the specified account name is not valid. What this means and how do I get rid of the error message?
Windows 7 Home Edition Premium does not the local security policy. I didn't know that you have the version of the operating system.
However, the error you get for realupgradelogontasks is RealPlayer. You can uninstall RealPlayer and reinstall to see if that will remove from TaskScheduler option to update.
If this isn't the case, then check with RealPlayer for the taking in charge of this issue.
Thank you
Marilyn
Maybe you are looking for
-
MBP trackpad scrolling is NOT possible
Since I installed my iMac to my time Machine backup on my MacBook Pro for five years, the Act of scrolling (with two fingers - scroll direction: finger movement natural tracks / content) on the trackpad of the MBP does NOT work! Are all the other ges
-
student in multisim edition installation problem
I first installed the version of multisim student and uninstalled it.now I am unable to re install the program.i tried to solve the problem by removing the directory program files.please help me solve the problem
-
I can implement the project in nero10. But when I go to set the parameters for where I want the DVD to burn it does not list the hp1170.
-
Vista Firewall blocks port 135, 445 of VPN connection
Desktop computer is Vista x 64 Enterprise. I can access other computers at the office without any problem of file sharing. I am connected to the Home Office via VPN and I couldn't access the file sharing from my computer at home. After having turned
-
How to request a review of my application?
Well, I just had a few engineering to leave a comment on my app emoticons 1 star to complain that it's just a bunch of images that you can attach to messages... dunno what this guy expects an app emoticons... I used the "request review" approach on o