ACR 8.3 B & W sliders Double click has stopped working

Similar Questions

• left mouse click has stopped working.

  left double click on my mouse does not open my programs allowing more but not, now I have to right click and open, can someone please help. Thank you

  Hello

  Control Panel - mouse - change at LEFT back and see if the same problem switches sides.
  If not, the mouse has a hardware problem. If the opposite problem on the other side then
  try these.

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK (so well then set change as if you planned
  to leave it like that and then go back and change it back).

  Control Panel - mouse - look for the settings for hover or click Automatic or similar depending on your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  Hope this helps

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Boxes click has stopped working

  I am having a recurring problem between projects with CP 8. Projects that have used to work, do not work now. The boxes click jump to another slide. I solved this problem by copying all the slides in a new project, where they will start working. But there is a lot of work to clean up the new project. I still run into the same problem again and again.

  Is there anything else I need to check?

  Is there maybe a question between the slide and slide 7? If so, Captivate may be preventing you from jumping on an unanswered question.

  See you soon... Rick

• Click force has stopped working

  Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

  I have checked all the options, rebooted the system, still no clear sign of what is the problem.

  Does anyone have the same problem? How to check weather force/pad touch works well?

  Any suggestions what to do?

  A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Double click does not work

  Hello community,

  Double-click no longer works.

  I tried the suggestions from the user to slow the speed of the pursuit.

  I have logged in safe mode and noticed when I am in guest mode, double click works, but not in my user account.

  Where should I go from here? It seems apparent to something in my settings of the user.

  Thank you!

  10.9.5 OSX

  System Preferences > Trackpad Point & Click

  Uncheck and recheck the boxes next to all the items listed.

  Best.

• OfficeJet Pro 8600 Plus: double-sided printing HP8600 has stopped working

  My HP8600 911 g printer double-sided printing has stopped working. Duplex accessory is still in place. Forum told to go into system preferences, open print queue and click on the driver tab. There is no driver tab. Just, it displays 'Driver 2.0' and does not give me the option to change this.  Don't know why? Duplex to work properly and now it doesn't. Any help would be greatly appreciated. Thank you!

  Hello

  I guess you can use AirPrint driver seeing your description.

  If please, try to add the printers printer & scanner, this time, click the use drop down and select the model of the printer default AirPrint option instead.

  Now check these settings and try to print a double-sided work again.

  Shlomi

• IM using Windows Vista Aero and when I right click Desktop Properties then personalization and appearance I get and error "windows internet explore has stopped working" Please help.

  Ive had this problem for a while now... imnew for vista because it's a new computer.

  I've sorted it but I'm not sure how and now the problem is back.

  When I right click on my desktop and go to personalization , then thecustomization and appearances I get error "windows internet explore has stopped working" and I get the options"restart this program" and "find a solution for this problem" if I don't find a solution nothing happens and if I restart the program it closes it.

  Im not sure what to do as I installed all the updates, a little bit mast service Pack2, but now I can not install more as if I'm going toStart > all programs > windows update if I try to update I get the same error...

  some can help me please.

  Sally.

  Hello

  Sorry we don't communicate via this forum.

  You need a real antivirus because these are the two antispyware. You have the PCtools antivirus
  on the computer or just their toolbar in Internet Explorer?

  -------------------------------------------------

  If there is no antivirus on the computer here is what I use and recommend (except for one
  program like Prevx, you don't want more than one antivirus on the computer program
  much less running because they interfere with each other and lower security). Each combination
  of her below you will warn of malware without toolbar from PCtools running online.

  Here's what I use and recommend: (these are alll free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Explorer has stopped working error - I can't right click a folder on the desktop.

  This is my brother's computer, and they do not arrive in his account, only mine.  I have administrator rights, but it seems not to matter. This problem occurs only occasionally.  For example, I can right click on this text, copy it, then paste it.  However, if I go to the desktop and try right click on a folder to rename it, I get the error.  The error indicates that Windows Explorer has stopped working, when it says that it restarts, then the Office updates really quick. None of what I found in the forums have worked again this is why I started a new thread.  I think it might be a problem with the registry, then someone can please help me quickly find a solution?

  Note: I can not run as administrator command prompt because I can't right click, so I can't run sfc/scannow.

  We are volunteers here for the most part.

  It's a shame that we don't know anything about the distressed system but it was MS Answers owners have chosen to implement this community - do not ask basic system information when a new question is asked that make problems a lot time and frustrating.

  But now they way they choose to turn things around here.

  Maybe this will help you with your system of unspecified of brand and model with the release of unspecified Windows and Service Pack and unspecified install antivirus/antimalware:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:
  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display.
  Choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

  

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

  You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

  You can Google something like:

  Windows Explorer crash

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!

• Windows 7 - current backup - Message 'Windows backup has stopped working' when clicked details

  I really hope someone can help me solve this problem.

  From the center of the action of the message "backup Windows has stopped working" appears in all of the following situations:

  Change the settings - custom selection
  The details view button
  The details of the problem for this are:
  Signature of the problem:

  Problem event name: APPCRASH

  Application name: sdclt.exe

  Application version: 6.1.7601.17514

  Application timestamp: 4ce79920

  Fault Module name: sdclt.exe

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce79920

  Exception code: c0000005

  Exception offset: 000000000006ec27

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 2057

  Additional information 1: 074f

  More information 2: 074fc5e23444d0689ec391e7e8fdce41

  3 more information: 9fb7

  Additional information 4: 9fb70d37706531bfd07966220029ca0e
  Curiously, however, the backup runs, and I can change the settings if I let you choose the selection option "auto - let windows choose".
  I did what follows in the hope of fix:
  Checked and disconnected the destination of backup disks.
  check all drives (chkdsk/f)
  Reboots (several)
  Disabled antivirus
  Validated executable file (it is identical to another machine where everything works)
  Any help gratefully received that I am at a loss!

  Hello

  You back up files to any external device?

  You can try the following and see if it helps.

  Method 1: System File Checker

  System File Checker will try to help you in fixing all corrupted files and folders from the computer.

  Please click on the link below:

  http://support.Microsoft.com/kb/929833

  Method 2: check if the Windows backup service is started or not.

  Follow these steps to search for the same thing.
  1. Select start > run and type services.msc.
  2. search for the Service backup Windows and double-click the Windows backup service to bring up Windows backup service properties window.
  3. Select automatic and then click Start.
  4. If this is not the case, it just select the menu drop down and then start.
  Also check if the service dependency for this service is started by following the same steps as above.
  First of all, to check which is the service dependency for Windows backup service follow these steps:
  1. Select start > run and type services.msc.
  2. search for the Service backup Windows and right-click on it. Click Properties and on the Dependencies tab, you will find the dependent services.
  3. write down these services that depend on and follow the 4 steps above and launch these services too.
   
   
   
  For more information, please see the links below:

  How Windows selects the files to back up?
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  Back up your files
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Back up and restore: frequently asked questions
  
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
   
   
   

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Click recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... »

  I'm having a problem with Windows Media Center. It starts no problem, but when I click on recorded TV, it says that "Windows Media Center has stopped working, seeking resolutions... "If I click on TV guide there is no problem. I tried a restore, but for some reason any restore function has been disabled.

  (copy - paste from another thread - user has same question):

  
  You has not, coincidentally, happens to record last Friday (I think it is?) episode of human target (what happened to be replaced by a House reruns), did you?
  Reason I ask: it has been a little traffic on to thegreenbutton on the subject these days - and everyone who reported also arrived to try to save human target.  Somehow, the file finished with metadata is corrupted, what makes MC crash when you enter recorded TV (at best, it crashes when you select the program from the list.)
  FIX: Open Explorer and go to C:\users\Public\Recorded TV.  Find and remove "human Target__"(exemple: «La Target_WDIVDT_2010_10_01».) ".
  Start Media Center, and then try again.  Fixed?

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• EXPLORER WINDOWS HAS STOPPED WORKING. EXPLORER WINDOWS RESTARTS. RIGHT CLICK

  Have Windows Vista.  When right click on photos, files photo or zip files error message appears: WINDOWS EXPLORER has STOPPED WORKING.  EXPLORER WINDOWS RESTARTS.  This error message also appears when you use the Remove button to delete the photos.  I did a registry cleaner, disk/driver cleaner, catering to a specific date.  I get to the point of confusion when searching for answers.  All opinions on the ShellExView or should I do a clean boot?  Help!

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• Weird black/window box after commissioning; "Explorer has stopped working". Error messages; Do not click on some things in the start menu; several McAfee icons in the lower sidebar...

  Where oh where can I start?  When I start the computer, my office is always in the background, but there is a pop up looking for black box thing.  There are no long enough for me to read what it says.  Something about system/Windows32 (not full title), then past to something else, even once too fast to read, disappears.  Then a window that says;

  • Online: 223
  • Char: 2
  • Error: 1% is not not valid Win32 SENSITIVITY
  • Code: 0
  • URL: file:///C:/Program%20files/PeoplePC/ISP3700/HTA/station.brt

  There is an option to run a 'this page with a script' or something to that effect.  If I choose Yes or no is not serious.

  Under this window is another

  "Runtime error!"

  Program:C:\ProgramFilesCyberLink\PowerDVDDXL\PDVPDXSrv.exe

  Application has requested the execution in an unusual way.

  On my sidebar on the right low in McAfee Ms red with white background icons, many of them until I sweep (no click) with the cursor.  They will disappear after the scanning, but then return.

  When I click on Explorer or the window will Flash quickly on and outside, or should I get the message "Windows Explorer has stopped working".

  I can get on explore if I disable all add-ons.  But it won't let me check yahoo IND. e-mail messages.

  When I try to go to things in the start menu that look like we can help him, I'll either get the error messages or off quick flashes of a window.  When I went into Control Panel, nothing happens when I click on the icons.

  When I went into the System Configuration. then click on services there are things that say that they are arrested.

  In its responses, please explain things as you explain to a 60 year old grandmother.

  Hello Halima S,.

  Thank you for your response.  I was checking things until I found your answer.  Do not be alerted via hotmail.  Somewhere in my files McAfee "View Log" I found that I was 'ping '.  What is crazy?  In the files for seven times in a row from 09:30-09:34 "SystemGuards have allowed a moment change on your computer."  Should I try to mess with this before that I have use the above tips or try your advice first?

  Ping, means that your mcafee dat files are up-to-date and also it cannot be updated no more. so try to update your antivrius manually by downlading latest mcafee dat files and also try runing mcafee!

  Take a look at this:

  http://community.McAfee.com/message/91863