Acrobat 9 - upgrade of computer OS from Windows XP to 7 - licensing issues?

I have a laptop Lenovo that came with Win XP and Acrobat 9 Standard pre-installed, but they gave me the Acrobat CD with product key on the back.   So after I wipe the HD and insall a new version of the OEM SP1 of Win7, can I just install the old CD Acrobat by using the product key, or I'll have the license re-installation problems? -JClarkW

In one of the menus, I think that maybe the file menu, there is an off button.

Tags: Acrobat

Similar Questions

  • Computer problem from Windows 10 to 7.

    We tried to go back to Windows 7, 10, we had a major problem.  In the changing Middle back, blue screen appears that says, "a problem has been detected and windows has shut down to prevent damage to your computer." There are a few things listed that you can check then mentions technical information: STOP 0x0000007E (0xFFFFF880022D114D, 0xFFFFF880009A9328, 0xFFFFFFFF80000003, 0xFFFFF880009A8B80). Computer tower works and "Windows Error Recovery" screen comes up. We are launching the "Startup Repair", and it cannot automatically repair.

    Details of the problem

    Name of the event: StartupRepairOffline

    Signature 01: 6.1.7600.16385

    Signed 02: 6.1.7600.16385

    Signed 03: unknown

    Signature 04:21200294

    Signature 05: AutoFailover

    Signature 06:6

    Signature 07: NoRootCause

    OS version:

    Locale ID:

    Was it the function Go Back which is a reverse upgrade and can suffer from problems as do the updates?  If so, you need to clean reinstall Windows 7 .

    But in the same time own 10 Windows Installer which is an infinitely better, you can install it with zero complaints that overcomes all the problems observed with upgrade.  Most tech enthusiasts would never run an upgrade or an installation of factory - is it two?

    If you already have 10 Windows on the drive and it turned on, then you have permanent right to reinstall as often as you want.  That's what I'd do, getting the superior clean install because that reinstalls Windows 7 became a PITA bread and it shows its years ago bad about proper installation of 10.

  • Update window 10: my computer updated from windows 7 to windows 10 two days

    * O.T. > upgrade window 10

    My computer has updated from windows 7 to windows 10 two days which is common.

    If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

    If you encounter an error about enough space to perform the upgrade, see the instructions:

    How to install Windows 10 on devices with limited space

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    Retry the upgrade manually:

    Option 1: Using the media creation tool

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    Select upgrade this PC now and then click Next

    Option 2: upgrade using the file ISO for Windows 10.

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
    • Support your default BIOS reset BIOS.
    • Check if there BIOS updates available for your system, and then to apply them.
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.

  • Advice on upgrading HP Pavilion dv5234us from Windows XP to Windows 7

    Hello community,

    I think in upgrade my dv5234us computer HP laptop Pavilion of Windows XP Professional to Windows 7, I wanted to just kown if someone out there has done the same and were able to comment on the performance or any question you may know.

    The laptop with the current setup works fine. Even just to think about the upgrade with the idea of not letting outdated laptop. I guess an increase in RAM will be a point, but I have problems with the overall performance, pilots.

    The current configuration is:

    Processor: Intel Centrino Duo - T2300 at 1.66 GHz

    RAM: 1.5 GB

    Hard drive 100 GB

    Any help will be appreciated

    Kind regards

    Carlos.

    I found this as well. I've never used this tool, but it seems useful.

    http://www.microsoft.com/downloads/info.aspx?na=47&p=1&SrcDisplayLang=en&SrcCategoryId=&SrcFamilyId=1b544e90-7659-4bd9-9e51-2497c146af15&u=details.aspx%3ffamilyid%3d734917D8-0663-4C26-89D0-2D00B632EBDB%26displaylang%3den

  • Impossible to upgrade my German version from Windows 7 Pro to Windows 7 Ultimate

    I have the German version of Windows 7 Pro that I bought, I would like to be able to display in English.   I understand well there is no LIP and I'll need to upgrade to windows 7 but cannot do my upgrade Express Manager...  He tells me that it is not available in my area, I'm in Switzerland, also in vain by us VPN.  any ideas?

    Original title: upgrade to windows 7 pro

    Whenever upgrades are no longer available. Your best option right now if you need ultimate is to buy a version upgrade or full version and use the product key with the wizard Express Windows 7 Professional upgrade upgrade to Ultimate.

    Where can I still get Windows 7?

    Microsoft Windows 7 Ultimate - full version

    Version upgrade - Microsoft Windows 7 Ultimate Upgrade

    First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation).

    Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

  • El Capitan Upgrade done away Partition from Windows

    I read a few threads on how to solve this problem and I went through the process of el Capitan has deleted my windows bootcamp partition stated here, but no luck. When I run TestDisk I get the following, and I'm not sure about one to choose. I have the feeling that I could have corrupted my partition trying to fix it, but I used someone else's values start and size at the top of the page 7 and 8. I love just for itself if someone can help me with this please. I really need my Windows partition for some programs.

    TestDisk 7.0, data recovery utility, April 2015

    Christophe GRENIER <[email protected]>

    http://www.CGSecurity.org

    / Dev/disk0 - 250 GB of disk / 232 GiB - 488397168 sectors (RO)

    The hard drive (250 GB / 232 GiB) looks too small! (< 289 GB / GiB 269)

    Check the size of the hard drive: HD jumpers settings, BIOS detection...

    The following partitions cannot be recovered:

    Start end partition size in sectors

    > Data 430084944 507915080 77830137 MS

    Data 430138640 507968776 77830137 MS

    Data 488396792 566226928 77830137 MS

    Data 488396799 566226935 77830137 MS

    [Continue]

    NTFS, blocksize = 4096, 39 GB / 37 GiB

    Blakes-MBP: ~ bwevans14$ sudo TPG - r - vv show disk0

    Password:

    See the TPG: disk0: mediasize = 250059350016; SectorSize = 512; blocks = 488397168

    See the TPG: disk0: MBR suspicious to sector 0

    See the TPG: disk0: Pri GPT to sector 1

    See the TPG: disk0: GPT Sec at sector 488397167

    start index size summary

    0 1 MBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 410156248 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

    410565888 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

    411835424 17968096

    429803520 58593280 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

    335 488396800

    488397135 32 table dry GPT

    488397167 1 dry GPT header

    Blakes-MBP: ~ bwevans14$ sudo fdisk/dev/disk0

    Disk: geometry / dev/disk0: 30401/255/63 [488397168 sectors]

    Signature: 0xAA55

    From end

    #: cyl hd s - cyl hd s id [Start - size]

    ------------------------------------------------------------------------

    1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

    2: AC 1023 254 63 - 1023 254 63 [409640-410156248] < unknown ID >

    3: AB 1023 254 63 - 1023 254 63 Boot Darwin [410565888-1269536]

    4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [429803520-58593280]

    Blakes-MBP: ~ the bwevans14 list $ diskutil

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 250,1 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_CoreStorage Macintosh 210.0 disk0s2 GB SSD

    3: disk0s3 Apple_Boot Recovery 650.0 MB HD

    4: Microsoft database 30.0 GB disk0s4

    / dev/disk1 (internal, virtual):

    #: NAME SIZE TYPE IDENTIFIER

    0: Apple_HFS Macintosh SSD disk 1 GB + 209,6

    Logical volume on disk0s2

    408D339E-1DAE-4160-9652-4D710D4EC03F

    Unencrypted

    Blakes-MBP: ~ bwevans14$

  • migrate from Windows 7 Home Premium license from one laptop to another

    I have a pack of Windows 7 Home Premium retail, I wish to deactivate my license of the existing laptop and activate it on a new laptop, impossible to disable it, please guide.

    Follow-up of the steps as suggested by 'Andre Da Costa' in another discussion.
    The steps as suggested by were -.
    _________________________________________________________

    Click Start, type: CMD
    Right-click on CMD
    Click on run as administrator
    At the command prompt, type: slmgr.vbs - upk

    Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone

    ________________________________________________________________

    When I do that, I get a message that says "error: 0xC004F025 access denied: the requested action requires elevated well want the administrator mode."

    Is there something escapes me out, I have to do something else?

    Haaa... it is resolved through the phone support. Was actually easier than I thought it would be.

    Thank you community,
    Thank you Andre, your suggestions have been useful

  • Chicony usb 2.0 webcam stopped working when I update from windows vista to windows 7 on Toshiba satellite pro L300-EZ1521 computer laptop

    When I upgrade the operating system from windows vista to windows 7 on Toshiba satellite pro L300-EZ1521 laptop, Chicony usb 2.0 webcam no longer works showing a message "webcam driver open fail.please restart camera or computer".in Device Manager the status of the camera says "this device is working properly".to go the control panel I select camera assistant software and clicked on change and when I try to repair a pop-up window with a message "Please insert disk 1 that contains the file data2.cab" is displayed. I tried to give the path of the driver (I have Vista), but it did not work.

    I need help please!

    Hi Aynalm,

    You can check the following link and try to download display Utility for Windows 7 drivers, and check if it helps.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2336263&RPN=PSLB9U&modelFilter=L300-EZ1521&selCategory=2756709&selFamily=1073768667

    Also check out the link:

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  • Computer locked up during the last step of the upgrade from windows xp to windows vista

    During the last stage of upgrade from xp to vista, "complete upgrade" my computer locked up: monitor frozen, unable to move the cursor, cannot close the window of upgrade. Green progress bar shows the upgrade about 3/4 full. How to unlock the computer without losing the progress of upgrading?

    Hello

    I doubt if you can

    have you checked the requirenents system before the upgrade?

    http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  • How can I move my computer from Windows Vista to Windows 7? Custom or upgrade?

    Hi, I have a Dell XPS M1530 with Windows Vista 32 bit, I bouht a Windows 7 Family pack upgrade, my computer has this partition of the hard drive C: 220 GB and RECOVERY D: 10 GB.

    I want to know that if I do the install as upgrade, it will keep the same partition of hard drive?

    If that's enough, this partition of Windows 7, or should I do a large partition?

    If I copy the D: RECOVERY files, do a factory image restore in the future?

    I have some other doubts that I ask after this ones.

    Thanks for your help.

    Hi Walter,

    Dell has not yet, I bought the W7 dell family pack,

    Let me tell you what I did, I opened the D: RECOVERY and copy all the content in an external hard drive just in case where I don't know (I don't know how to do the recovery disc).

    I copy all my files on the same portable hard drive, and then I make an original image to restore.

    I update W Vista until Service Pack 2 and now I try to install the Windows 7 upgrade, but I don't know how to do and if I do which is how I had to do.

    I have the reistalation W Vista 32 bit of dell DVD.

    Let me ask you something when you said: ' make an upgrade should keep the same data programs and settings, etc ", do you mean that when I do the upgrade of the partition of the factory will be the same after the upgrade?

    copy the files from an external hard drive recovery and create a disc from there will not allow you to use them to reinstall vista

    Ask how to do recovery dell discs

    read my 1 answer

    and make the windows 7 upgrade was referring to the installation of windows 7 as an upgrade to vista on partition of 220gbs

    for any other installatiion windows 7 questions to ask in the Sub forum to install windows 7

    "Download Windows 7 installed and activated on your PC."

    http://social.answers.Microsoft.com/forums/en-us/w7install/threads?filter=AllTypes

    good luck with it

    Walter, the time zone traveller

  • Getting the error "your computer hardware should be upgraded" during the upgrade from Windows 7 to Windows 8. 1

    Hello

    I recently bought a DVD of Windows 8.1 and when I try to update my Windows 7 to Windows 8.1, I get error "your computer hardware must be upgraded. I have Dell Inspiron N5110 notebook with Windows 7 Home Premium 64 - bit Service Pack 1. The laptop is running on Dell BIOS A09. I did a google search for this error and found that I need to update my BIOS to version, but most of the reviews in said Internet Dell BIOS A11 running 'black screen' after being upgraded to Windows 8 or 8.1. How can I solve this problem to upgrade my laptop for Windows 8.1? Any help is greatly appreciated!
    I thank very you much in advance!
    Thank you
    Srini

    Contact Support latest Tech Dell to see if they have an update of the BIOS.

    http://support.Dell.com/

    Note: Have your number of practical service.

    Also before you upgrade do a backup of Windows 7 Image just in case the issue of the "black screen" is not resolved. The Image will allow you to restore Windows 7.

    EaseUS Todo Backup Home V6.1 http://www.todo-backup.com/
    Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
    (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
    Version 6.1 supports XP, Vista, Windows 7, 8 and 8.1

    Acronis True Image 2014 - has a 30 day trial version available, trial key sent by email.
    Note: Initialization of cloning and the road (creating a MBR) are not supported in the trial version.
    For the trial version, only pick up is available when booting from a Bootable Acronis media.
    Install Acronis and then create a bootable media restoration/rescue CD before you start creating your first backup image
    http://www.Acronis.com/homecomputing/products/
    30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
    True Image User Guides and documentation:
    http://www.Acronis.com/homecomputing/products/TrueImage/#resources
    2014 supports XP, Vista, Windows 7 and Windows 8

    J W Stuart: http://www.pagestart.com

  • Computer upgrade - Lightroom from Windows to Apple

    Hello

    I am wanting to upgrade my Dell computer while a desktop computer running Windows 7 (which is slow and I hate it) to the Macbook Pro laptop.

    I was wondering if others have found this easy to do without losing catalog information and so changing from Windows to Apple is easy to do. I'm pretty computer illiterate, any tips or advice appreciated.

    NAT

    See How can I move Lightroom to a new computer? Lightroom Queen

    You have a perpetual version or cloud?

    If perpetual Lightroom serial number is valid for both Windows and Mac.

    Download the installer from Adobe's Mac, install and enter your serial number.

    If Cloud, see download and install apps Cloud Creative

  • I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?

    I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?

    Hi davidm1224,

    I regret that we do not any version upgrade to Acrobat DC of Acrobat 9.

    You can buy the full version of Acrobat DC.

    For more details, please visit: Plans and prices | Adobe Acrobat DC

    Let us know if you encounter any problem.

    Concerning

    Meenakshi Negi

  • I think to upgrade my computer to a mac from Apple. Can I download my programs on the new computer. I currently use a laptop running Windows

    I think to upgrade my computer to a mac from Apple. Can I download my programs on the new computer. I currently use a laptop running Windows

    Hi,

    I see you have a subscription of photography under the enamel even as with the forums.

    You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

    You can download the installer for Creative Cloud from here:
    Creative cloud help | Creative cloud desktop.

  • Recently, I upgraded my computer from Windows 7 to Windows 10...

    Recently, I tried to use my original software on the computer. Programs are Photoshop Elements 8.0 and Adobe Acrobat for the school. On the elements, I get error 150:30 and on Acrobat, I get 148: 3. I'm both are a license error. I downloaded the program from adobe to fix this problem, but after that I start it the window just closes. I need it for school.

    Hello

    For the issuance of Acrobat, it seems that the licensing has stopped working. To fix it I ask you to see the link following once, perform the steps mentioned and see how it goes.

    Error: "License has stopped working". Windows

    For Photoshop Elements you can edit your query on the next page so that an expert could help you.

    Photoshop Elements

    Concerning

    Sukrit diallo

Maybe you are looking for