ACS 3.2 to 3.3 - restore config update

Similar Questions

• iPhone 4 will not restore or update

  Hello

  I just pulled out my old iPhone 4 that I haven't used for probably a year and a half. My iPhone 5 c died on me randomly and I set up an appointment to get it fixed, but until now, I need to access some applications I can download on my 4.

  Surprisingly, the battery is still able to be charged and the phone finally woke up from his sleep. Then I tried to connect to my WiFi, but none of the wi - fi access points appeared in the list, and the upper left corner of my screen went on to say "search". I tried to restart the phone, which has proved to be a heck of a lot of trouble because it would show the logo of apple on the screen for so long each time. I finally went to bed and tried to sleep, but of course to get up to ten minutes later and the phone was finally facing upwards. Same problem of wi - fi. So I thought I would try to update.

  It comes as I had before he told me "this phone could not be updated." and then asked me if I wanted to try the update again, or to restore and update, I tried the update again, just in case. That did not work. So I tried to restore twice (and to update because apparently that was required to restore) and he said "this phone could not be restored." According to me, it gave me an error number (16) and iirc the update error was (17).

  Can someone please?

  During my minutes awake eagerly hoping that it works, I realized I should probably keep my 4, loaded and ready just in case my 5 c dies never again, because my Apple Care runs in June and I will probably not be able to pay a 6 until the 7 came out. Maybe even the 8.

  If I am able to solve this problem and wi - fi still does not work, I'll probably put it in the fridge (that my Iphone 4 32 GB Black can't find any wifi network) because obviously my phone has been reset a dozen times now and my wi - fi works with everything else is probably not the modem.

  I found the answer here: cannot restore my Iphone 4 after an update, Please HELP!

  "I was able to fix this by simply changing the usb ports..."

  Has worked for me, my phone has restored himself. Now is the time to try the hack of refrigerator.

  Edit: so bad, I just went more near my modem (right next to her instead of the room above) and he acknowledged the connection. Hooray!

• error 53 on I phone6, I can't restore and update to ios 9.1, there by icloud, but it does not work

  I can't restore and update ios9.1 53 on iphone error 6, I try by icloud, but it does not work

  the screen on the myphone was raplaced, how can I restore phone

• XP - error Code: 0X80072F78 (cannot restore hidden updates)

  Restore hidden update option is grayed out. It won't let me him. have not received updates since 2/2010. all of the suggestions. also receive error 0x80072F78 #. This is for Windows XP. Thank you

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads , http://social.answers.microsoft.com/Forums/en-US/w7repair/threads , http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Restore hidden updates is greyed out

  I need to restore an update that I've marked to not show again and my hidden updates 'restore' under options is grayed out.  How can I get that back?  I did a reboot one or twice after having my updates and it still does not.

  Thank you

  Hi ThelmaHawk,

  Try this, click on Start-. "" "" "" ">" Control Panel "--->"Security Center "--->"automatic updates 'and at the bottom of the page, click on the link, ""offer updates again, that I've previously hidden ', , then click on "Yes" when prompted.

  I hope this helps.

• Auto updates! fails at stage 3 config update, it keeps restarting

  My Dell laptop did an automatic update, now at step 3 config update, it keeps restarting, ideas? Vista Home Ed.

  Hello

  I suggest you try the steps below and check if it helps

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7.

  http://support.Microsoft.com/kb/949358

  Hope this information is useful.

• Updates defective installation as computer repeatedly sending message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Faulty installation of update as a computer several times to send the following message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Hi NickGodin,

  You can try these steps and see if it helps.

  Step 1:

  If you are unable to boot into normal mode, you can read the following article and try the steps to run the system restore.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  Step 2: When you are in normal view, you can see the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  You can also try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• How do I restore an update partial version 9?

  Last week, I started to install the fix APSB 12-26. I downloaded the file, unzipped and followed the instructions on this page. I had to enter the console by clicking on the 'i', adding the hf900 - 00009.jar file and clicking on the submit changes"" button.

  I restarted all services.

  For various reasons, which I won't bore you here, I could not go any further with the installation of the patch, so I don't change anything else on our installation of CF9.

  Since, we've had some weird problems with our Web sites, which may have been caused by this partial installation of the hotfix. I would like to uninstall whatever it is only to add the .jar file, but I can't find information on how do it.

  I checked our backups from the day before, I tried the update and the folder now contains the hf900 - 00009.jar file and a file named empty.txt has just the file empty.txt in it. Should I simply delete the .jar file and then click on the "Submit changes" button, or is it more than that?

  As you can tell, I'm a complete newbie when it comes to the administration of ColdFusion, so I appreciate any help you can give me.

  Hi Lewis,

  There are 2 sections and that you mentioned that you have not completed the process of update, then you can simply replace the CFIDE folder and delete the update file .jar file and restart the service to the ColdFusion Application that will do it.

  If you have followed Sections 1, then removing the .jar file, then start it again service restores the update. However if you follow the Section 2, then I need to know if you have to replace the files in the 'lib' folder or not. If you did then it is difficult to reverse, however if you take the backup of the 'lib' folder so you can replace it with this.

  I hope this helps.

  Thank you

  Priyank

• Restore config on the hub

  I was looking for an overview of the process of restoration to a hub, but haven't found anything. Even the manual I have about Cisco VPN has nothing on the steps involved. Is it as simple as connecting via http (s) or ssh and restore a backup of the config, for example

  List of files

  -------------

  SAVELOG. TXT CONFIG CONFIG. BAK

  (1) delete file

  (2) copy the file

  (3) view file

  (4) place the file via TFTP

  (5) to obtain a file via TFTP

  (6) exchange of Config files

  (7) to export the XML file

  (8) import an XML file

  (9) to reformat the file system

  (10) back

  and overwrite the current CONFIG file? Are there pitfalls here?

  Thank you

  Bill

  Yes, copy a good backup of CONFIGURATION and restart the computer.

  As long as the file that you have saved to is good, there is no traps.

  The password of the admin account is NOT contained in the file config however.

• How to restore config created with get-vmhostfirmware

  Hello

  I have created a backup of my ESXi host with get-vmhostfirmware configurations using the script from Alan Renouf linked here http://www.virtu-al.net/2011/02/23/backing-up-the-esxi-system-image/

  I'm basically running...

  Get-vmhostfirmware - $vmhost ESXI1 - Backupconfiguration c:\ESXIBK\ - Destinationpath

  This creates a configbundle - esxi1.tgz

  It's terrfific, but I don't know how to restore this configuration.

  I think that the answer is, but experienced people can you please confirm

  Game-VMHost - VMHost ESXI1 of State "Maintenance".

  Set-VMHostFirmware-catering - Sourcepath c:\ESXIBK\ - HostUser - HostPassword password

  This seems OK or do I need to list the name of the bundle?

  Any help would be greatly appreciated.

  Thank you

  Simply add the parameter VMHost and perhaps avoid the prompt

  Set-VMHost -VMHost ESXI1 -State 'Maintenance' Set-VMHostFirmware -VMHost ESXI1 -Restore -Sourcepath c:\ESXIBK\ -HostUser user -HostPassword password  -Confirm:$false
  

• How to restore config VDR after upgrade

  I followed http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1022346 for install VDR 1.2 1.2.1 but either missed or has not been presented with the option to restore the configuration from the store of data deduplication.  Is it possible to do afterwards?  The store is mounted, but I haven't done anything with it.

  After the integrity check, you will see the restore point and backup jobs.

  André

• Dreamweaver 8: restore config/sites

  Hello:

  I transferred computers from XP to Windows 7. I use DW 8. Before I switched computers, I've created a site backup from within the program. However, I did all of the backup drive and who has access. I just loaded DW 8 on the new machine, found the Configuration file saved and, on Windows 7, restored to: C:\Users\George\AppData\Roaming\Macromedia\Dreamweaver 8

  However, when starting of the new DW 8, my site information do not show. How do it? Are there any other Configuration I should restore files/folders?

  Thank you

  George

  You have access to the FTP info?

  It is much faster and easier to re - enter your details manually FTP that wasting his time by transferring registry entries.

• How can I get my backup iOS9 stick? 'Restore backup' updates automatically to iOS10 once again without asking me first.

  Title says it all. I HATE iOS10 and I have a backup of iOS9 into iTunes from just before the update, but whenever I try to "restore from backup" it automatically updates new back 10 without asking me.

  Help, please. 10 is a total disaster on my iPhone 5s; endless crashing and overheating. I just want my phone works again... and dump iOS10 like a bad date.

  Latest version of iTunes is running. 10.9.5 OS on a Macbook Pro.

  Sorry, but you cannot go back to 9. It is not an option. I have two iPhone fives on iOS 10.0.2 with no problems. Your must not be crashing or overheating. I suspect a corrupted app that comes back with the restore of the backup. Can try a restore as new to test.

• stuck in recovery mode tastu cannot restore or update

  iPod touch stuck in recovery mode tastu not allow the update or restore.

  Follow the troubleshooting steps in this document support. If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• I have phone 6 fails to restore or update

  Phone, message to the more capacity keeps popping up and all synchronization and setting functions to date do not work. The camera does not work as well for the same reason. Have removed almost all the photos, many of these applications removed, and there is no visible data on the phone. Stopcock restarting has no effect

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  Solve the iOS update and restore error in iTunes - Apple Support