ACS 5.1 upgrade path

Similar Questions

• Impossible to reinstall XP, error «...» Windows is not a supported upgrade path"

  Computer is 2001 Sony Vaio apparently infected Office who knows what, if I want to do a clean install of the operating system. The computer came with Windows ME and a drive to upgrade to XP. 5 years, a technician thought he was doing me a favor and installed without my knowledge its own XP Pro.

  I tried to do an installation of my upgrade XP disc but I get this message: Setup is impossible to pass your current installation of Windows XP. Your current Windows installation is not a supported upgrade path. Setup cannot continue.

  I also tried to use the Sony system recovery CD, but it does not work.

  Help!

  Hi IAMSOBZ,

  As you install the operating system from a CD to upgrade it you will be asked for support of qualification, you can insert your Windows Millennium Edition or any CD which is an edition less than Windows XP Professional.

  Important: You will need to have a CD of Windows 98/Me/2000 eligible to insert if you are using a version update of XP to clean install. OEM restore disks will not usually fill the eligibility standard. If the restore disc i386 folder, it will work normally.

  a. start your computer from the Windows XP CD-ROM. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

   

  Note: To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

  b. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.

  c. once the Welcome to Setup screen, press ENTER to start Windows XP Setup.

  d. read the Microsoft software license agreement and press F8.

  e. Setup will scan for previous Windows installations

  f. you will need to replace the CD of XP with your qualifying CD; XP Setup will scan the qualifying CD and ask you to replace it with the XP CD to continue installing XP.

  g. complete the installation

  You can refer the link to find out how to install Windows XP below: how to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IDRAC6 upgrade path

  I am temporarily caring for a Dell PowerEdge T610 purchased in 2012.  Our outsourced IT Department walked me through some maintenance tasks, including required launches a Virtual Console through iDRAC6. Apparently my iDRAC6 version (V1.80) is so old, no modern browser it supports fully. What I have for the most part works with Chrome and FireFox, not IE (but it's OK - I don't work with IE either).

  I am trying to determine if a firmware upgrade path exists for my hardware, and if so, what are the steps. None of my research on the Dell Web site have meaningful results. Since my system is no longer under warranty I don't get a lot of help by telephone, and "cat" is denied for me as well.

  If anyone can point me to a good place to get started which would be a great help.  Thank you!

  Hello.

  See the upgrade below. First apply the BIOS, then the respective DRAC6 firmware.

  6.2.3 BIOS iDRAC6 v1.92                   

  BIOS 6.3.0 iDRAC6 v1.95                  

  BIOS 6.4.0 iDRAC6 v1.97, iDRAC6 v1.99 , and iDRAC6 v2.8.0                  

  The path of update will prevent iDRAC communication and other server issues.

• Upgrade path 5500 series ASA-SSM-10

  Can anyone provide the proper for the 5500 series ASA-SSM-10 upgrade path of

  6.0 (5) E2

  TO

  7.1 (10) E4

  The release notes state that you must run just least 6,0000 e4 could so I just spend 6,0000 E4 5,0000 E2 then directly to 7.1 (10) E4?

  Also, the SSM-10 is able to effectively run the 7.1 (10) E4?

  Hello

  Yes, you can directly upgrade 6.0.5E2 to 6.0.6 E4 and then directly to version 7.1. (10) E4. After the upgrade for the latter, you might even go to latest available patch as well.

  -Yes, SSM1 - is able to effectively execute the 7.1.0E4.

  Kind regards

  Akshay Rouanet

• C / SX / EX / MX upgrade paths

  Hello

  I have been the scene of c20 upgrades via the GUI and CPC, 4.x > 5.1.1 > > 7.3.2 7.1.1 hopping. 3rd party support told me that this is the way to upgrade the C20s.

  I struggled to find any documentation to confirm this upgrade path to 7.3.2. I'm about to proceed to the upgrade C40s and 60 with SX / EX / models MX.

  I'm looking for the validation of the document confirm how best to spend to 7.3.2 on all of the above models.

  I looked at the release notes do not seem to talk about any version of jump requirement.

  Thank you

  B

  You can go directly to the current version of the TC software without having to jump several releases to get there.  You'll just need to get the keys to unlocking the Cisco Licensing Portal TC7.x and apply it on the codecs, before doing the upgrade.  Applying the unlock key invites you to restart, you can disregard and go directly to download TC as the upgrade to restart anyway endpoint and apply the release key at the same time.

  Note, it is important that you read well ALL the TC release notes for the current version, you have up to TC7.  There are several versions where changes have been made that could be important to you.  Some of these changes are:

  • TC5.x - required serial connection is by default enabled (important only if you use control 3rd party such as Crestron or AMX systems)
  • TC6.x - layouts have changed, especially when using two screens with presentation and selfview.
  • TC7.x - Root access has been removed (I noticed that mention you SCP that requires root access), also instantaneous behavior has changed over the previous day.

• 13.2.2 to 14.5.0 TMS upgrade path

  Hello

  I'm looking to make an upgrade to TMS 13.2.2 we currently have running on an old box of Windows 2003 R2.

  We are looking to set up a new server using 2012 R2 as the operating system.

  The environment:

  Windows 2003 R2

  SQL Express 2005 w/DB hosted locally

  13.2.2 TMS

  TMSXE (on another server) 3.0.2

  The methodology of Migration:

  Migrate the existing database to a SQL server hosted and test all the features

  If it is successful then

  • Remove the old server from domain/network
  • Rename the new server the same as
  • Install the TMS 14.3.0 on the new connection to the existing database server, hosted on the external SQL Server
  • Run the time zone update tool that comes in 14.3.0
  • Update the 14.3.0 existing install 14.5.0

  This methodology seems as if it was the right way to go? There are fundamental flaws, that I don't see here?

  I did this upgrade path in the laboratory successfully using a copy of our existing database, I have no alternative endpoints or vcs-control etc. to connect to the lab to prove everything works after upgrade.

  I look forward to your responses.

  Thank you

  Alex

  Hello Alex.

  You should consider upgrading to TMS 14.6, which is the most recent version.  14.6 TMS notes.

  TMS 14.5 supports only Windows Server 2012, not 2012 R2, but 14.6 done TMS.  Also, if you are not already the case, consider using SQL Server 2012 or 2008 R2 64 bit, to be compatible with future versions of TMS.

  The steps that you listed sounds good, just check on that TMS installation guides for supported versions of WIndows and SQL details, as well as all the required components.

• vCD 8 upgrade path

  Hi all

  Can upgrade you form vCD 5.5 directly to vCD8.0 or are you to go first to 5.6.4?  I can't find anything in the notes version or installation & Upgrade guide.

  Dave

  OK - I answered my own question with the Matrices of the interoperability of VMware products.  I don't know if the "Upgrade Path" option is new, but I don't remember having seen it before.  In any case, the vCD 8.0 upgrade is supported from version 5.5.4 and 5.6.4.

  Dave

• Upgrade paths for vCenter Server 4.0/32-bit to 64-bit/5.0

  So, for various reasons beyond my control, when we installed vCenter server when we migrated from 3.5 to 4.0, it has been installed on 32-bit Windows.

  Data backended by a full instance of SQL Server (not the MSDE version that comes pre-packaged with vCenter).

  So, I try to understand the strategy of less impact for the trip to 5.0.

  One idea I had is simply to build a new 'home' for vCenter Server on x 86-64 and point the application on the existing database running on 32-bit windows server. (I'm guessing that the 32/64-bit nature of the database server itself is largely irrelevant as it allows 64-bit vCenter Server to talk to it). I think then that all information cluster all would remain intact since it's in the database, etc..

  If I had to, I guess, we could install vCenter 4.0 (64-bit) on the new host and THEN perform the upgrade, if it was really important, but I somehow don't think it is.

  Once that is done, we would eventually just make a backup/restore type upgrade path to move data out of the old host and the new host and re-point vCenter Server in its local database now.

  A that someone does something similar to this? Traps, we should be aware of? Warnings that it would never work the way we expect it to be, etc, etc. ?

  One idea I had is simply to build a new 'home' for vCenter Server on x 86-64 and point the application on the existing database running on 32-bit windows server. (I'm guessing that the 32/64-bit nature of the database server itself is largely irrelevant as it allows 64-bit vCenter Server to talk to it). I think then that all information cluster all would remain intact since it's in the database, etc..

  That's what I'd do.  It your DB is remote, it is a fairly straightforward upgrade.

  1. turn off your old Instance vCenter

  2. backup your DB instance

  3 copy the SSL directory off the old vCenter and the new (you'll probably to manually create the path, before installing vCenter)

  4 set up your ODBC connection and test

  5. install vCenter and use existing DB

  Assuming that you are going to use the same host name and IP address for your new instance of vCenter, like your old, all stocks will be as it was before the upgrade.

• Adobe Reader 8.1.7 upgrade path?

  Could someone please explain the upgrade path to Adobe Reader 8.1.7 for me? I read the tech note "Adobe Acrobat and Reader to date and deployment information" and I am still a little uncertain.

  Our most currently deployed version is 8.1.6 but some of our users still have older versions (8.1.2 ~ 8.1.5) installed. I've been distributing Adobe Reader via SMS 2003 from version 8.1.2 as below:

  8.1.2 - customized using Adobe Cusomtization 8 (Setup.exe /sPB /rps /rs) Assistant

  8.1.3 - customized using Adobe Cusomtization 8 (Setup.exe /sPB /rps /rs) Assistant

  8.1.4 - straight (number installAdbeRdrUpd814_all_incr.msp! /norestart)

  8.1.5 - right installation (number AdbeRdrUpd815_all_incr.msp! /norestart)

  8.1.6 - right installation (number AdbeRdrUpd816_all_incr.msp! /norestart)

  So, what is my upgrade for Adobe Reader 8.1.7 - right installation path (number AdbeRdrUpd817_all_incr.msp! /norestart) or do I need to customize using Adobe's Assistant to keep the desired settings? Appreciate any advice anyone can offer. Thank you very much.

  Adobe Reader 8.1.7 patch can be applied only to 8.1.6. Then first you must bring all your systems to 8.1.6 and then apply 8.1.7 patch.

  Custom settings do not download if you install 8.1.7.

  If you have a system with 8.1.3 or 8.1.4 or 8.1.5 so that-

  Apply 8.1.6 patch--> Apply 8.1.7 patch

  If you have a system with 8.1.6 then do-

  Apply 8.1.7 patch

  If you have a clean system, then the shortest is to install the reader 8.1.7-

  Install Reader 8.1.6 Apply patch 8.1.3-->--> Apply 8.1.7 patch

  NOTE: Reader 8.1.3 is an install (msi) full 8.1.6 and 8.1.7 are patches (msp).

• How to apply for ACS 5.5 Upgrade License

  We bought the license to upgrade ACS 5.5 (R-CSACS-55VMUP-K9 =). I read below the steps of the migration of 4.x to 5.5, I have found anywhere you need a licence. Is it really necessary?

  In fact I intend to reconfigure all about ACS 5.5 from scratch. Can I use the license? or to buy a standard license to download GBA 5.5?

  Since we have already purchased the upgrade license, can I 'pretend' to migrate an ACS 4.x and wipe it and redo the configuration, just to use the Upgrade License?

  What is the best approach to get the job of license with decent cost?

  Thank you

  5.5 Cisco secure access control system migration guide
  Using the Migration utility to migrate data to ACS 4.x for ACS 5.5

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Hello Hujian. The "migration license" is the same as that of "standard". The only difference is that you put on it, since you already have ACS 4.x. If you were buying ACS 5.x today and you have not previously ACS then you would have been ineligible for migration license.

  That being said, there isn't really a direct from 4.x to 5.x migration since the whole system has been rewritten. For example, as you know 4.x ran on Windows and did not require not a vs 5.x license runs on Linux and does not require a license. You can use the utility 'migration' to help you migrate some of the configurations but it does not migrate everything. I personally never liked to use it and always what you plan to do is build the new server from scratch :)

  I hope this helps!

  Thank you for evaluating useful messages!

• ACS 5.1 upgrade

  Update to CSACSE-1113-K9 unit run 4.2.0.124 and 5.1 supported?

  I don't think that's going to happen, unless a new upgrade of the hardware Kit is created, look at this for comparison of system memory:

  ACS 4.2:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5712/ps2086/data_sheet_c78-453387_ps5338_Products_Data_Sheet.html

  ACS 5.1

  http://Cisco.com/en/us/prod/collateral/netmgtsw/ps5698/ps6767/ps9911/ps9915/data_sheet_c78-504202.html

  Also a new DVD would need to be developed from ACS unit Versions are hardware specific. I suppose it is not impossible to use the same DJ, but I have not heard of any close of plans occur.

  Now, keep in mind that the ACS 4.X to 5.X upgrade is consider a Migration complete... a lot of differences in the way you manage your customers, users, political...

  HTH.

• ACS 5.5 upgrade patch

  Hi all

  According to Cisco, it is necessary to install the Patch: A-PreUpgrade -CSCum04132- 5-4-0-46 - 0 has .tar .gpg before moving to 5.5. Our current system running 5.4 has the latest patch 5-5-0-46 - 1.tar.gpg already installed.

  I am aware that the patches are cumulative and if install us later it covers all of the patches below. but the Readme did not specify the ID of Bud

  CSCum04132. Can you please advice what I need to install patch Pointed-PreUpgrade -CSCum04132- 5-4-0-46 - 0 to .tar .gpg before upgrade?

  Not sure how GBA 5.4, you have applied hotfix ACS 5.5. The 5.5.0.46.1 patch is for GBA 5.5.0.46 only.

  The fact-preupgrade patch is not covered by any rollup, as is a special patch.

  In order to upgrade the ACS from 5.4 to 5.5, here is the process:

  1.] apply the latest patch i.e patch 5-4-0-46 - 6.tar.gpg

  
  

  2.] apply the patch sharp i.e sharp-PreUpgrade -CSCum04132- 5-4-0-46 - 0 to .tar .gpg

  
  

  [3.] before running the "compress database" on ACS CLI.

  4.] apply ACS 5.5 application upgrade i.e ACS_5.5.0.46.tar.gz

  It will be useful.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• ACS 5.2 upgrade - bad file software download

  Hello

  I'm trying to upgrade acs 5.2 with the patch 5-2-0-26 - 1.tar.tar.

  First of all it is not the right extension when downloading the file from the software download.

  then when I get 'patch install FTP of 5-2-0-26 - 3.tar.tar', I get the following error message:

  % File manifest not found in the bundle

  I think that the file is not damaged.

  have someone encountered the same problem and the set?

  Kind regards.

  Hello

  Rename the file 5-2-0-26 - 1.tar.tar 5-2-0-26 - 1.tar.gpg. I had the same problem and rename the file solved that problem.

  ZR

• [ACS 5.2] Upgrade to ACS 5.4

  Hello

  We got 2 Cisco ACS 5.2.0.26.10.

  Main server as authentication server and collector of newspaper

  Secondary server as authentication server. The replication is configured.

  I read the following guide: http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/installation/guide/csacs_upg.html#wp1194934

  "There are a few exceptions to this typical configuration, you can manage as described below:

  If the primary Server 5.3 ACS also works as a newspaper collector in your deployment 5.3, you should promote one of the secondary servers in the first server in the deployment. See the promotion of a secondary to the primary server .

  This exception is combined with my case. I promote my secondary server as primary.

  I would have:

  Secondary server as authentication server and collector of newspaper

  Main server as authentication server

  Now, I think I have to cancel the registration of secondary to the main server...

  According to the guide, I upgrade the server of the newspaper collector.

  "Step 1: select a secondary server to become a newspaper collector:

  I don't have another secondary server...

  What should I do now? (upgrade secondary/log Server? backend upgrade?...)

  This guide assumes that I have 1 primary and 2 secondary...

  I don't know what steps to follow...

  Thanks for your help,

  Patrick

  You have an open requestes TAC and so you will get their orientation

  Wil share still some general clarifiactions that I'm aware of when ranging from 5.2 to 5.4 ACS ACS

  For the first step in the upgrade process, you want to upgrade the collector's journal since will the configuration data and M & T.

  (1) if the ACS 5.2 log collector is a seconday should just remove from the deployment to make independent and then upgrade the server to be ACS 5.4. He will start the new ACS 5.4 main server (this is temporary and gets rectified at the end of the whole process)

  (2) if the collector's journal is primary GBA 5.2 then promote a difference then collector journal is now secondary and can follow step 1)

  At this point have a server on CSA 5.4 and rest on ACS 5.2. Can now begin to spend the rest of 5.2 to 5.4 ACS ACS servers (as guide says: "enter the secondary server for GBA 5.4 primary server '-c' is the main temporary server as described in step 1)

  Once all servers are migrated then can select "primary long-term." as opposed to a temporary

  this writing I see that it is hard to explain. Am sure that TAC will do better

• CISCO ACS 5.7 upgrade

  Hello; I'm trying the upgrade of our ACS VM to 5.6 to 5.7 ACS servers. The file ISO, Tar 5.7 and basic Patch works very well. The question that we run into seems to be after each update rollup. The 'Show Application status ACS' shows that half of the process are in a "not monitored" State (management, View employment Manager, Manager of display-alert and View log-processor). Other services are in a running state.  Show "Stop and start GBA" or "Recharge" solves the problem. I am Inquiring on what I can do next. Thank you very much in advance

  Hello

  The bug that you mentioned is now resolved in patch 5 5.8 ACS

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Concerning

  Gagan

  PS: Please write it down as correct if it helps!