ACS as a certification authority

Similar Questions

• ACS 5.2.0.26 recovery of the CRL to MS Certification Authority

  Hi we're question retrieve the CRL.

  Another example of what we like our URL to our CRL in the certificate issuing and root on GBA.

  http://XYZ-CA-issuer.com./CertEnroll/XYZ%20Root%20CA.CRL

  I saw a post

  https://supportforums.Cisco.com/docs/doc-2760

  This article describes our problem, but in the latest version of the CSA, I am unable to put a space instead of % 20.

  This one is for ACS 4.

  CSCtj15117 5 ACS does not support space (20%) in the URL of the CRL

  However, this bug has been marked Unreproducible because he was working in certain configurations and failing in one.

  I suggest that you work with TACS to analyze your configuration and possibly resurrect this bug if necessary.

  Nicolas

• How to force Thunderbird to accept a certificate? or admit a new certification authority where it does not accept authority as being valid?

  I get the following message when I check the signature of the shippers:

  This certificate cannot be verified and is not imported. The issuer of the certificate may be unknown or untrusted, the certificate may have expired or been revoked, or the certificate should not have been approved. »

  Then, after conversion of the .crt to a tent and .cer file to import in the list of the authorities - I get the following message: "is not a certificate authority certificate, so it cannot be imported into the list of certificate authority."
  I converted it by saving it to alternative formats, but it does not accept the authority of certification.
  I don't understand why Thunderbird won't let me accept the risk.
  Can I do this without getting the server of the sender address and port?
  Thank you!

  Ok. Roger all. Will try to get another certificate of the sender. Thank you very much!

• Where is 'Local certification authority' in ASDM?

  Hi I read an article, which the tile is Anyconnect certificate-based authentication. In his comment, to add the user, the author stated:

  «Configuration > VPN remote access > certificate management > local CA > manage the user database"."» but I can't find ""local CA > Manage User Database ' where is it? " Can someone give me some suggestion? Thank you

  Your screenshot is configuration > device management.

  Instead, go to Configuration > firewall > advanced > Certificate Management > local CA.

• Setting up Certification Authority (CA) signed certificates for vCenter Server Appliance 6

  Hi all

  Recently, I managed to migrate to vCenter Server Appliance 6. 5.5, there was a large KB (2057223) on Configuring Certificate Authority (CA) signed certificates for vCenter Server Appliance. I tried to do as it says configure the certificate for v6.

  Unfortunately, I understand that some services such as lighttpd are changed in version.

  Can anyone provide a new instruction for the v6?

  Thank you

  Thank you. That helped me to see the idea. However, the explanation in the pages that was not complete. I had to search for more.

  This blog helped me solve my problem with the generated certificate:

  http://longwhiteclouds.com/2015/03/22/vSphere-6-using-Vmca-as-a-subordinate-CA/

• How to add a certification authority root private SSL

  I work for a large company that has their own root CA. How do I install it in Firefox 16.0.2 on Windows 7?

  See NSS security tools:

  • http://www.Mozilla.org/projects/Security/PKI/NSS/tools/index.html

• When should I remove a certification authority that sounds strangely like I would never use it?

  When I opened the Manager under Tools/Options/Advanced certificates, I found a long list of certificate authorities that looked very suspicious to me. For example, the first was an outfit under the name of "TÜRKTRUST" with names of Turkish language.

  Where did this come from?

  There are quite a few other "suspects" looking for names of CA.

  What happens if I delete them all?

  OK, listen to the developers of firefox: YOU determine which I trust? I'm sorry, but sometimes I don't trust companies. It's part of the reason why most of the people stepped over to Firefox. Moreover, if for each "secure" connection in the world of browsers continue making connection to a very limited number of "certificate authorities" as "Verisign" / eTrust' etc., then the CONNECTION may be safe, but the FACT that xxx.xxx IP number connects to (ensure) website www.trytokeepasecret.org is 'leaked '. (as an average user is not informed or even not aware that issuers of certificates are associated with each secure connection) And I think that actually... my privacyis has missed.

  Connect to a Web site is something between me and this Web site and this is MY directive weather or not, I trust this Web site certificate, and no business of a third "certificate issuer". Arbitrary list in Firefox, Firefox users should have their say in it. It's MY secure connection and not Firefox! I don't trust Türktrust, or the rest of the list! And the fact that the developers of Firefox are trying to push this (telling me who to trust) in my throat makes me hate Firefox.
  In fact for THIS reason issueI find Firefox itself turns into an organization that I have more confidence. Just look at this list! It is obvious that someone pays enough money (or influence blackmarket) can become a transmitter of certificate.

  The Firefox people @: I would like to be able to connect to ANY Web site that I like, comprende?

  At the SAME TIME Firefox will automatically CONNECT to each tag advertising and tracking on all Web sites! (Again violate my privacy!)

  The only reason why I always use Firefox is because of the "requestpolicy" addon, which is able to block connections to 3rd-party sites. (TRY IT!) Why? Most sites use google analytical these days, and google must be connected to almost all Web sites UNLESS you use the requestpolicy! It's really an incredible feat the amount of information they collect while the main audience realizing it.

• Issuance of certificates using the Microsoft certification authority server

  I'm pretty new to this. Can I know if I install an r2 ca server 2012 Windows offline / standalone sup, can I use it to create certificates and issue certificates? Or do I need to use a CA company online sub (with active directory) to perform tasks?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I have an hp9800 printer... the lights keep flashing, but I just installed a recharged certification authority

  I have this hp 9800 printer... I got it for a few years, happy with it. Yesterday I had the Tricolor cartridge filled... and I checked and they are filled with ink for the three colors, but, once I installed in the printer, keep it in flashing... just could not get rid of it and it does not print.  Any suggestion?  Thank you.

  It is preferable to use genuine HP ink with the printer.  How many times that a cartridge has been refilled? The charged cartridge may not work due to the process used to fill up again. I would try a new cartridge from the printer and see is which solves the problem.  Here is a link to a document on the reloaded cartridges. http://support.HP.com/us-en/document/c00853819

• Configuration of VMware vSphere 6.0 CA VMware as a subordinate certification authority

  I'm trying to do it according to the kb

  2112016

  It still fails. I get the error message looks like this in the logs:

  2016 07-12 T 17: 52:24.720Z ERROR-2016-07 Certificate Manager-12 T 17: 52:20.636Z certificate of update for the extension "com.vmware.vim.eam".

  2016 07-12 T 17: 52:24.720Z ERROR-certificate error during replace operation Manager of Cert, please visit /var/log/vmware/vmcad/certificate-manager.log for more information.

  2016 07-12 T 17: 52:24.720Z certificate {} ERROR-Manager

  'resolution': null,

  'detail':]

  {

  'args':]

  "" 2016 07-certificate update 12 T 17: 52:20.636Z to \"com.vmware.vim.eam\" extension\n""

  ],

  "id": "install.ciscommon.command.errinvoke",

  "localized": "an error has occurred during the call to the external command: ' 2016-07-certificate update 12 T 17: 52:20.636Z for \"com.vmware.vim.eam\ ' extension\n' «,»

  "translatable": "an error has occurred during the call to the external command: '%s' (0)»

  },

  "Error of update of certificate for the solution: com.vmware.vim.eam.

  ],

  'componentKey': null,

  'problemId': null

  }

  2016 07-12 T 17: 52:24.721Z INFO-Certificate Manager Performing root Cert price reduction...

  It's on vSphere with the VCSA (not Windows vCenter) correspondent 6.0U2

  Among the things I've tried:

  • Using a unique name for each .cfg creating CSR
  • Change the eam .properties file to remove the entry "localhost" and substituting a FULL domain name

  All that can be said, it does not work the way they should be in the KB. I was treated and this is a brand new facility.

  I use option (2) - i.e. the possibility to replace the certificate root with a custom cert signed by Microsoft and then the VCSA generates all remaining certificates.

  I have a case of VMWare support in the meantime. Just wondering if anyone has any ideas.

  Oh - I also tried the naming conventions names mentioned here, that made no difference either:

  Initial setup of the VCSA...  Integration of the AD...  Had to replace certs.  Now unavailable from the web or client VCSA

  At a loss.

  Thank you

  After a pension case, the answer is: throw your VCSA and create a new

  It seems that if you use option 2 on a new installation, you can corrupt your SSL certificates and kiss goodbye to your VCSA (unless you have some shots of her)

  The recommendation that I now have to use option 1 instead.

• Navigating between the applets in the same deal signed jar (approved certification authority) err

  See [http://www.chrisnewland.com/java-7-update-21-signedunsigned-error-switching-between-applets-in-the-same-signed-jar-trusted-ca-339] for my investigations so far.
  
  By clicking on a link to navigate between the applets contained in the same pot signed (signed by a CA) appears an error dialog box complaining a mixture of signed signed/no code.
  
  Each applet in a fresh browser loading works fine.
  
  If you click applet to applet 1 2 via a non-applet page, then the two applets run without problem.
  
  [EDIT: it's behavior is new to 7u21]
  
  Published by: Chris Newland on April 17, 2013 03:19

  I had to add:
  Only trusted: true
  to manifest to get rid of my applet message.

  The exact message was as follows (for the sake of the search engine):

  Block potentially unsafe components from being run?
  
  Application: YourAppName
  
  Java has discovered application components that could indicate a security concern. Contact the application vendor to ensure that it has not been tampered with.
  
  The application contains both signed and unsigned code.
  
  Action buttons for Block and Don't Block
  

  More info on mixed code: http://docs.oracle.com/javase/6/docs/technotes/guides/jweb/mixed_code.html

• Authentication of ACS with PEAP / MSCHAPv2 - customer rejecting Server

  Hello

  Have a network setup wireless with Cisco 1131AG towers, c6500 WISN module test (4404-WLC) is authenticating with a Cisco ACS appliance (1113) using PEAP and MSCHAPv2 authentication.

  The laptops have the Cisco SSC customer (in collaboration with Mgmt SSC utility).

  A self-signed certificate created on the fate of ACS and root exported and installed on the laptop computer of TCL.

  IF CSSC box 'validation Server' is not selected, the authentication process works and I am able to connect to the network.

  IF CSSC "Validation of server" is checked, the authentication will fail.

  The problem, it appears that the customer refuses the server certificate:

  "Server certificate chain is not valid.

  The GBA, in the 'fail' authentication logs, message the following is stated:

  "Authentication failed during SSL negotiation" (which obvioously refers to the strand of string not valid)

  Any ideas?

  When you create a self-signed certificate, is there a specific directory, when the server certificate must be located? as c:\cert\certificate.cer

  Also, the certificate name must match host name of GBA?

  i.e." CN ="

  Any advice or pointers would be appreciated.

  Thank you

  Questions, it's that when you check the validation of server Box, you must make sure you have the certification authority in the root Certification Authority trusted. For example, in windows, there is a list of servers CA where you check the server certificate validation and also one of the root certification authority is on the list. If the root CA is not listed, then you must add to the list and check it out.

  You are right on the client rejecting the sever cert... Authentication failed during SSL negotiation

  This doc will give you an overview:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29.shtml

• ACS appliance fails to recognize an installed certificate

  When I install a certificate from CA - Windows Server, following the procedure of "Wired Dot1x version 1.05 Config guide" (Document ID 64068) and the 'Guide user to ACS,' I have the following problem. If I want to change the "overall authentication settings', I get the warning"could not initialize the PEAP or EAP - TLS authentication protocol because the certificate authority is not installed. Install the certification authority using the ACS Certification Authority Setup page".

  But if I check "install Certificate", it is said that the certificate is installed correctly and it is also added to the "Configuration page of the authority.

  I already found the following in the as 4.1.4 release notes: "turn off the Security agent, reinstall the certificate in accordance with the procedure and then re - activate the security officer.

  I did it but I still have the same error, even if the security officer is disabled (I checked it in the console with the command 'show' and the CSA is off).

  Can someone help me how to recognize the installed certificate?

  P.S. I also see 2 devices in the AAA-server list:

  -ACS01 (the name I gave him in the initial configuration). This one has an IP address of the DHCP server, even if I said NOT to use a DHCP server, but a static IP!

  -Self: this one has the static IP I configured via the console...

  I can't remove one of the AAA servers. Is it normal that there are 2 servers?

  Bert,

  It seems that the certification authority that you have installed is damaged or poorly installed. I want do you is remove the certicate CA by using the MMC on windows in ACS and then reinstall it.

  You, too, need to install the certificate authority root in ACS. You can install the certificate authority root in System Configuration-> ACS certificate of installation-> ACS certificate authority installation.

  Also incase you use Verisign cert, you install VeriSign intermediate CA certificates.

  https://www.VeriSign.com/support/VeriSign-intermediate-CA/index.html

  Kind regards

  ~ JG

• Authentication Radius ACS with WLC 5508 and AD 2012 5.5 failure

  Hello

  I need help on these errors.

  Here is my configuration: WLC 5508 7.6.130.0-> ACS 5.5.0.46-> AD 2012

  I have (2) errors in ACS 5.5

  12514 EAP - TLS failed SSL/TLS handshake because of unknown CA in the client certificate chain

  22044 result of identity politics is configured for certificate-based authentication methods but based received password

  Already installed the CA cert and cert local in ACS as well as in the client PC.

  Please see screenshots

  OK, in this case:

  1. you will need to properly configure the Windows pleading before that this can work. You need to set the type of authentication and the trusted certification authority. If the certification authority is not available in the list of certificates, you need to import

  2. If you do PEAP then your identity store should be Active Directory and no profile authentication certificate. The certificate authentication profile is used for the basis of certificates (EAP - TLS) authentication.

  Thank you for evaluating useful messages!

• ACS 4.0 EAP - TLS Cert does not

  Hey,.

  so, I have generated my certificate signature request, took it to my CA, a cert. "ACS Certification Authority Setup" I have installed on my device ACS, then 'Install ACS certificate' installed (he parked in the privkey and password so I guess he got that comes from the cert file). I then add the CA to "change CTL. All of this goes off without a hitch.

  However when I try to add the "certificate revocation list" I am unable to add the two LDAP:------and http://. I confirmed that the http:// is working on the certification authority, and all the possible indications are that the ldap protocol works too but I can't test with tools.

  When I go to "System Configuration"-> "Global Authentication Setup"-> "allow EAP - TLS' I get the following error.

  Could not initialize the PEAP or EAP - TLS authentication protocol because the certificate authority is not installed. Install the certification authority by using the "ACS Certification Authority Setup" page.

  Exactly, which is not installed on the certificate? It is on the ACS server, it is configured and the date range is correct.

  I've been banging my head against this all day and could use some suggestions. :)

  Hello

  For EAP - TLS to work you must use external CA installation such as Microsoft or Rapid SSL etc and auto generated in ACS certificates supports PEAP support but not EAP - TLS.

  HTH

  Ahmed