ACS5.1 - AD and mapping of RADIUS attributes

Similar Questions

• ACS 5.2 - Support for RADIUS attributes per user

  Hi all

  Does anyone know if it is possible to configure the RADIUS attributes on a per user in GBA 5.2 basis?

  That was possible under ACS 4.x, however, that I can't seem to find reference if ACS5.2 supports.

  Thank you

  Leon

  You can do this by setting by using attributes and then by substution attribute.

  You can see an example of it to set an internal user attribute to use as the value for the field address-IP-box

  This is just an example and can be applied also to any attribute RADIUS in which set an attribute of the user of the same type. Values can also be taken from an external identity as AD store

• IOS Easy VPN Server / Radius attributes

  Hello

  I made an easy VPN server installation with a running 12.2 2621XM router (15) output T5. VPN Clients/users are authenticated against Cisco ACS 3.2 by RADIUS.

  It works fine, but there is a problem that I can't solve. Each user must have the same VPN assigned IP address whenever it is authenticated.

  The ACS sends the right radius attribute (box-IP-Address) back to square of IOS, but this address is not assigned to the client. The customer always gets the next available IP address in the local set on the router.

  How can I solve this problem?

  You will find the relevant parts of the configuration and a RADIUS "deb" below.

  Kind regards

  Christian

  AAA - password password:

  AAA authentication calls username username:

  RADIUS AAA authentication login local users group

  RADIUS AAA authorization network default local group

  crypto ISAKMP policy 1

  Group 2

  !

  crypto ISAKMP policy 3

  md5 hash

  preshared authentication

  Group 2

  ISAKMP crypto identity hostname

  !

  ISAKMP crypto client configuration group kh_vpn

  mypreshared key

  pool mypool

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac shades

  !

  mode crypto dynamic-map 1

  shades of transform-set Set

  !

  users list card crypto mode client authentication

  card crypto isakmp authorization list by default mode

  card crypto client mode configuration address respond

  dynamic mode 1-isakmp ipsec crypto map mode

  !

  interface FastEthernet0/1

  IP 192.168.100.41 255.255.255.248

  crypto map mode

  !

  IP local pool mypool 172.16.0.2 172.16.0.10!

  Server RADIUS attribute 8 include-in-access-req

  RADIUS-server host 192.168.100.13 key auth-port 1645 acct-port 1646 XXXXXXXXXXXXXXXX

  RADIUS server authorization allowed missing Type of service

  deb RADIUS #.

  00:03:28: RADIUS: Pick NAS IP for you = tableid 0x83547CDC = 0 cfg_addr = 0.0.0.0 best_a

  DDR = 192.168.100.26

  00:03:28: RADIUS: ustruct sharecount = 2

  00:03:28: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1

  00:03:28: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.

  4, len 73

  00:03:28: RADIUS: authenticator 89 EA 97 56 12 B1 C5 C2 - C0 66 59 47 F7 88 96

  68

  00:03:28: RADIUS: NAS-IP-Address [4] 6 192.168.100.26

  00:03:28: RADIUS: NAS-Port-Type [61] Async 6 [0]

  00:03:28: RADIUS: username [1] 10 "vpnuser1".

  00:03:28: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".

  00:03:28: RADIUS: User-Password [2] 18 *.

  00:03:28: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/4 l

  in 108

  00:03:28: RADIUS: authenticator C1 7 29 56 50 89 35 B7 - 92 7 b 1 has 32 87 15 6

  A4

  00:03:28: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:28: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255

  00:03:28: RADIUS: Tunnel-Type [64] 6 01:ESP [9]

  00:03:28: RADIUS: Tunnel-Password [69] 21 *.

  00:03:28: RAY: box-IP-Netmask [9] 6 255.255.255.0

  00:03:28: RADIUS: Framed-IP-Address [8] 6 172.16.0.5

  00:03:28: RADIUS: [25] the class 37

  00:03:28: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0

  000010]

  00:03:28: RADIUS: 2F 33 63 30 61 38 36 34 31 61 76 70 75 73 [3/c0a8641a 6F 2F

  /vpnus]

  00:03:28: RADIUS: 65 72 31 [1]

  00:03:28: RADIUS: saved the authorization for user 83547CDC to 83548430 data

  00:03:29: RADIUS: authentication for data of the author

  00:03:29: RADIUS: Pick NAS IP for you = tableid 0x82A279FC = 0 cfg_addr = 0.0.0.0 best_a

  DDR = 192.168.100.26

  00:03:29: RADIUS: ustruct sharecount = 3

  00:03:29: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1

  00:03:29: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.

  5, len 77

  00:03:29: RADIUS: authenticator 13 B2 A6 CE BF B5 DA 7th - 7B F0 F6 0b A2 35 60

  E3

  00:03:29: RADIUS: NAS-IP-Address [4] 6 192.168.100.26

  00:03:29: RADIUS: NAS-Port-Type [61] Async 6 [0]

  00:03:29: RADIUS: username [1] 8 'kh_vpn '.

  00:03:29: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".

  00:03:29: RADIUS: User-Password [2] 18 *.

  00:03:29: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:29: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/5 l

  in 94

  00:03:29: RADIUS: authenticator C4 F5 2F C3 EE 56 DA C9 - 05 D6 F5 5 d EF 74 23

  AF

  00:03:29: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:29: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255

  00:03:29: RADIUS: Tunnel-Type [64] 6 01:ESP [9]

  00:03:29: RADIUS: Tunnel-Password [69] 21 *.

  00:03:29: RADIUS: [25] class 35

  00:03:29: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0

  000010]

  00:03:29: RADIUS: 2F 34 63 30 61 38 36 34 31 61 2F 6 b 5F 68 76 70 [4/c0a8641a

  [/ kh_vp]

  00:03:29: RADIUS: 6 [n]

  00:03:29: RADIUS: saved the authorization for user 82A279FC to 82A27D3C data

  Assignment of an IP address via a server Raidus is currently not supported, even if your Radius Server is through an IP address, the router will ignore it and just assign an IP address from the pool locla. In fact, the pool room is the only way to assign IP addresses currently.

  On the only way to do what you want right now is to create different groups VPN, each reference to a local IP pool with an address in it. Then ask each user connect to the appropriate by their VPN client group.

  Yes, messy, but just try to provide a solution for you.

• ACS 5.1 - profile of the authorization, the RADIUS attributes

  Hello

  I am setting up Radius AAA for cat6K switch.

  For the authentication of its work and the user can connect to. But for the assignment of a privilege level, it does not work.
  After loging in, I always get the privilege 1.

  I need your guide on how to Setup GBA 5.1, RADIUS attribute.

  I followed the document to configure the cisco-av-pair to assign 15 privilege and privilege 5, but it does not work.

  This format of the attribute has been shown in document is to define the privilege 15 "shell: priv-lvl = 15.

  Please refer to my screen shot, it's the right way to set it up on ACS 5.1

  Creation date: June 12, 2011 05:56 by: Damiano, Anisha A(ANDAMANI,279917) problem:

  =========

  Authorization does not not as expected

  Resolution:

  ============

  Adding a type of NAS-Prompt service

• What is the situation with the mac pro users and map of cuda for ray-tracing work?

  What is the situation with the mac pro users and map of cuda for ray-tracing work? If it is not necessary or should I try to install a?

  CUDA acceleration is no longer under development, and I've only played with traced to the RADIUS on a few test projects. If I need 3D dimensions objects I used C4D Lite, which is now included in EI

• I am traveling to the United States to Australia next spring. I'll be able to use my iPhone AT & T 6 + for calls, texts and maps here?

  I am traveling to the United States to Australia next spring. I'll be able to use my iPhone AT & T 6 + for calls, texts and maps here?

  Yes, but it will be expensive as you will be traveling. Contact ATT to see what offers they offer when traveling.

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Add under "Setting up groups" RADIUS attributes ACS 4.2

  Hi Security Experts,

  I need to add RADIUS attributes to a custom under the 'Groups Configuration' page provider ACS 4.2. From now on, I see of Cisco Aironet RADIUS attributes.

  IETF RADIUS attributes etc in the page "setting up groups. How can I ensure that the RADIUS attributes for a provider also appear on this page?

  PS: I have the useful messages rate

  Thank you

  Boudou

  Under the "Interface", you can set which you want to view the RADIUS attributes. It is probably just a missing check for your provider.

  The Options for RADIUS are described here:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RADAtr.html

• Mapping of LDAP attributes

  If you use LDAP attributes to map users to a specific group on the SAA is it necessary for group lock if I want a user to connect to a single group? I use the Cisco-Group Policy attribute to map an LDAP attribute = an employee service e.g. sales, marketing, research, etc..

  Kind regards

  Charles

  No, if you already configure map LDAP attribute, then there is no need to configure Group locking because map LDAP attribute will automatically map the user to the specific group policy you have created through mapping.

  Hope that answers your question.

• Can you do not design 'Collections' and 'Maps' everything first before 'content '?

  Can you do not design 'Collections' and 'Maps' everything first before 'content '?

  You can create cards and put forward that you have content, but at least be content to back up you will not see something useful on the device.

  What to do if I want to uproot just a few items to the prototype of the structure of an application and play with cards/layouts is that I create banners instead of articles. Banners are created quickly and don't have a file .article, yet always behave like the articles for the purpose of maps/layouts. You can even have their points to a URL in order to get some feeling for what content would look like by pointing to things on the web.

  Once I am happy with the prototype I will remove banners and replace them with the content real .article of enforcement.

  Neil

• Can ACS adds more Juniper RADIUS attributes?

  Hello

  These attributes RADIUS Juniper taken in charge by Cisco default ACS4.0

  Juniper-Local-user name

  Juniper-allow-orders

  Juniper-deny-orders

  Is it possible to add more 2 attributes

  Juniper-help-Configuration

  Juniper-deny-Configuration

  Kind regards

  Audrey

  Hi Audrey,.

  4.0 the only way to add these attributes is to contact TAC and get the script directly from the developers.

  This problem has been resolved in ACS 4.1.23

  http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCsi18979&submit=search

  If that answers your question, then please mark this thread as solved, so that others can benefit from.

  Kind regards

  Jagdeep

• change the customer RADIUS attributes sent by switch

  I recently started to use NPS to authenticate logins to my Cisco devices and I have the basics of work.  However, I have a need to add an additional constraint corresponding to my NPS network policies.

  Now I use the friendly name of the RADIUS client and/or IP address but I can't find the template for the syntax of these constraints NPS can do what I need without I create literally dozens of policies.  I need somehow add an attribute to a certain group of switches so that I can "filter" which group AD Windows can connect to them by using a strategy that corresponds to that custom attribute.

  In the constraint list NPS, I see I have a few options like 'Called Station ID', 'NAS ID' and 'Customer Vendor ID', etc. available.  Is there a way to change these attributes of the switch and send them to the NPS then I could achieve what I want.  For example, I could set up the 'Client Vendor ID' of my special switches with custom data that I could then use to match the political refusal NPS.

  Any ideas?

  TIA

  Hello Diego again :)

  I checked with a friend who used the NPS more than me and he was not aware of a way to create groups of location"in NPS or something similar where you can distinguish two different NADs.

  However, it provided an interesting solution. He suggested that we use a regular expression in the field identifier Sin in NPS. The regular expression would be for the IP subnet for that particular site. For example, assume that you have two sites:

  1 A: site with local subnet of 192.168.30.x 24

  2. site B: with local subnet of 10.10.1.x 24

  In NPS, you can build a rules like this:

   If NAS Identifier is 10\.10\.1\.* and AD Group is Site_B_Admins Then Full access

  And for the Site A

   If NAS Identifier is 192\.168\.30\.* and AD Group is Site_A_Admins Then Full access

  Of course, to do this, each site must have a single subnet that does not overlap with other sites.

  Hope that gives you some kind of a solution

• ASA5500 radius attributes web vpn

  Hello

  I'm working on obtaining ssl vpn users authenticated via radius. Whenver that authenticates a user, I get the following attributes of the ASA:

  Username = "user".
  User-password = «*»
  NAS-Port = 266403840
  Calling-Station-Id = "1.1.1.1".
  NAS-Port-Type = virtual
  NAS-IP-Address = 2.2.2.2
  Cisco-avpair = "" ip:source - ip 1.1.1.1 =<30><149>".

  Pretty things standard, but the ASA documentation supports many other attributes. Why are they not those passed in the authentication request? Is there something I need to do to activate these? Basically I have differnet tunnel groups with user names and the ASA does not give me information on which group or url, the user landed on, so I do not know how to authenticate these users. Kingdoms are not an option for me.

  Is it really all that is sent? RADIUS-request must include the tunnel-group-name like the following that is within a radius of "debug" on a 8.4 (5) ASA:

  Radius: Type = 146 (0x92) Tunnel-Group-Name
Radius: Length = 8 (0x08)
Radius: Value (String) =
56 50 4e 2d 44 45                                  |  VPN-DE

• Open photo of Photos in the Preview app? Need info GPS and maps!

  Hello!

  I write trip review and to see where my photo was taken (in the maps application), and what is digital gps coordinates for each image.

  Search on google - go, I got that via this pic of opening in 'Preview' app.

  But - I have all my pic in Photos app (automatically imported from my iphone to macbook pro Mac OS sierra).

  so, I can export all the photos, I need, in a specific folder and then, from there, open it in the finder and get my info, of course - but looks silly, I think.

  as I already have this pich in Photos - photo can I somehow open directly from Photos Preview app?

  or obtain the gps position open, where this picture is taken in cards programm (not this small window, which is in the Photos, but wide, Maps application) / and obtain the coordinates of the gps directly via the Photos app?

  Thanks in advance.

  Use the media browser in preview - in the open window on the left down - media = == > photos == > Photos

  or even more appropriate is to buy external editors for extension of Photos in the App store ($0.99) and you can view the pictures in preview when using the hotos

  Photo editing Photos for Mac Extensions

  LN

• Google maps and maps does not not on iOS10/iPhone 7

  Since I have the iPhone 7 and by doing so updated to iOS10 my Google Maps constantly I am at home. I've deleted and reinstalled and it worked brielfy before stopping in a random place, and then finally get back to me at home. The possible reasons for this!

  It is also haopening for me. So frustrating. It is slightly different because he doesn't think I'm home but in random places and his /voice not even always on. It is not up-to-date or for example, if it says, turn left into 4.4 mikes he doesn't know that I have reached the turn. No warning without voice. Nothing.