Action Center request password

Similar Questions

• Cannot open the message of solution in the Action Center in windows 7

  I got the solution in the windows 7 Action Center, but I can't open it. I don't know that my internet connection is good. How can I get the message of solution? Thank you.

  Same here, but I can have a work around.  Had a Windows 7 BSOD twice in a week.  Both times the Windows Action Center reported that he had a solution, but when I clicked on the link to view the solution, the Details of the Message screen says he was unable to download the solution and told me to check my Internet connection.  Clearly not the problem.  I clicked on the link "see all the problems that this applies".  Check-video equipment 2 errors and the other "stop unexpectedly" (BSOD).  Workaround: in an event random dumb luck, I clicked on the back arrow at the top of the Action Center to return to the display of the details of the Message, and as if by magic, instead of the same message on checking my Internet connection, it displays the solution!  Now, don't get excited too - the proposed '' solution '' is not really a solution for the BSOD or apparent problem with the NVIDIA graphics card.  Here you go:

  A problem with the NVIDIA graphics driver

  NVIDIA Graphics Driver has stopped working properly.

  An update of the driver, as appropriate, could prevent this problem does not happen.

  There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

  1. Look for the optional third-party updates

     Even if all the critical updates have been installed on your computer, the optional updates may be available for NVIDIA Graphics Driver, who have not yet installed. Here is how to use Windows Update to find and install the updates driver option:

     1. Click here to open Windows Update in Control Panel

     2. In the left pane, click check for updates to see if there are any optional updates available for your computer.

     3. If the optional updates are available, click the link to view and select the updates to install. (If you don't see this link, you may need to clickSearch online for updates from Microsoft Update).

        If no optional updates are available, go to step 2.

     4. Select the optional updates, you want to install (especially if they seem to be related graphics), clickOK, and then click install updates.

  2. Try to manually update the NVIDIA Graphics Driver

     If no optional NVIDIA Graphics Driver update was available in Windows Update, you can try the NVIDIA Graphics Driver update manually.

     Note
     It's best to let Windows automatically installs the drivers for your hardware, as described in step 1 above.

     If you decide to manually update the NVIDIA graphics driver, here's how:

     1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     2. In Device Manager, double-click display adapters, and then double-click the name of the NVIDIA Graphics Driver device running.

     3. Click driver , and then click set to update driver.

• When asked how you want to search for driver software, click search automatically for updated driver.

• Windows locate and install a new driver, if available.

• See the NVIDIA Corporation Web site for driver updates

  If no optional NVIDIA Graphics Driver update was available in Windows Update, go online to the following site to check for driver updates:

  Click here to go to find out if a solution or an updated version is available online on the website of NVIDIA Corporation

How to upgrade manually a pilot using a file downloaded

1. Click here to open the Device Manager

2. In Device Manager, locate the device you want to update, and then double-click the device name.

3. Click driver , and then click set to update driver.

4. Click Browse my computer for driver software.

5. Click on the Browse button and look for the folder that you saved on your desktop.

6. Select the folder that contains the driver files.

7. Click OK, and then click Next.

8. Follow the instructions to complete the driver installation.

Note
If you run the latest version of the NVIDIA graphics driver and you still experience the problem, we recommend that you contact NVIDIA Corporation or by the manufacturer for support, and additional information.

• Visit the Web site of the manufacturer of your computer for driver updates

  If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

  How can I find the manufacturer of my computer?

  Click on the Start button , typemsinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as themanufacturer of the system in the right pane of the system information window.

  Click here to go online to see the contact information for most of the computer manufacturers

  How to upgrade manually a pilot using a file downloaded

  1. Click here to open the Device Manager

  2. In Device Manager, locate the device you want to update, and then double-click the device name.

  3. Click driver , and then click set to update driver.

  4. Click Browse my computer for driver software.

  5. Click on the Browse button and look for the folder that you saved on your desktop.

  6. Select the folder that contains the driver files.

  7. Click OK, and then click Next.

  8. Follow the instructions to complete the driver installation.

What is a driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

• Windows 7 action center > security > I can't change the uac user account at the level of the control window freezes / uac rest!

  PROBLEM: ACTION CENTER > SECURITY > USER ACCOUNT CONTROL FREEZES AND REMAINS OFF - I CAN'T CHANGE THE UAC LEVEL. When access to the center of the Action (Windows 7-32 bit) > Security > UNDER USER ACCOUNT CONTROL IS OFF > said UAC will be NEVER NOTIFIER > and below it in blue is the option to click on "Choose your level of UAC" > I click it and it opens a window "DECIDE if he MUST BE INFORMED of CHANGES to YOUR COMPUTER" with a feature of landslide to choose the level > I DRAG to ALWAYS NOTIFY ME AND EACH TIME the SCREEN is IT FREEZES LET ME HIT OK - so I can not change this setting. It won't let me change to always warn me - the recommended setting, and I can't go beyond that! The window closed either! I'm trying to close the window by clicking end task in Task Manager - it takes several attempts before / if it can close this frozen window... BUT THE KEY IS THAT I CAN'T CHANGE THE UAC LEVEL - THE SCREEN FREEZES AS SOON AS I GLIDE TO ALWAYS WARN ME - HELP? * NOTE: a few times after the Task Manager tried to close the window without success, I saw a box pops up that says: Manager of COM surrogate has stopped responding... he tries to fix - as if Windows stops responding, and he tries to recover or fix the problem. I would like any help or information please, as to why I can't change this setting, even after I give an administrator password, you are prompted, to say good make - when I am logged in as a standard user. Help? Thank you!

  Hi Shellzak,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not change the UAC settings on the computer and the system hangs. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  Did you of recent changes to the computer before the show?

  I suggest the following method and check if it helps to solve the problem.

  I suggest you try to activate UAC from the command line and check if it helps.

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) run this command

  Reg.exe ADD HKLM/v EnableLUA /t REG_DWORD /d 1/f

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Action Center is out of control

  I have reinstalled Windows 7 64 on my HPE-510 t.

  Everything works fine, including Laserjet P1006 and Deskjet 3050 printer and the USB controller.  Test the pages look beautiful.  Drive external drive has no problem talking to the computer.

  I have this icon of the persistent Action Center telling me the printer drivers and the USB driver must be installed.  So I installed the driver laserjet three times, twice deskjet printer driver and USB driver once. Everything works well, as far as I can tell.

  Why don't this recall Action Center and it's all small yellow triangle!  Go away?  I can't think of what I have to do.

  Does anyone have advice?

  Richard

  Hi rich,

  You can try this:

  Right click on the Center of the Action in your taskbar and open it > Change Action Center settings >

  Under 'Maintenance Messages' > UNCHECK "Device Software" > OK

  
  Disable any other thing that is bothering you.  The service here's help; If it makes you crazy, this isn't helping.  The smile.

• Satellite A660 Win7 - power management system action center is missing driver

  I replaced the battery on my laptop Toshiba A660-15J and a few months, is back with the battery high capacity and now Action Center 7 win keeps popping up with the message that I need to download and install the missing driver for power management system.

  The power supply has been replaced not at all, nothing has changed, except for the battery.

  Costs of light on the functions of the laptop, as it did before the battery change.
  It turns on and is red and after a few hours, it becomes white and the battery level shows that it is 100%

  The problem is that this center of windows 7 says that missing one driver ACER? -> WTF?

  The link to download it from DOES NOT

  It seems odd that the link that windows provides its on a site of acer, but since part´s manufacturers other´s manufacturers use it does not at all surprise me.

  I want just the clarification and confirmation of what I have to do here, and why to toshiba Service does not show this update?

  I read that the BIOS update can fix this, however there is NO bios update for my laptop.
  I have also contacted MICRO$ OFT but I'm still waiting for a response from them.

  I also read other messages on various toshiba forums that relate to this same problem, but they used to say that the model is not supported by toshiba in this country...

  I clicked on the link on this forum directly on the site of Toshiba Australia, so please do not tell me that my model is not supported on this forum of Toshiba Europe!

  The exact message:
  Download and install the driver for your power management system
  Your power management system is missing a driver.
  To resolve this issue, follow these steps:
  Press or click on to download the driver of the A + c + e + r society Web site
  Download and extract the driver files
  Type and click on save or save as, and then save the file to your desktop. If you can t choose where to save the file, you will need to find and copy it to your desktop. When you download files, most of the web browsers save them in the folder to download on your computer.

  > I replaced the battery on my laptop Toshiba A660-15J and a few months, is back with the battery high capacity and now Action Center 7 win keeps popping up with the message that I need to download and install the missing driver for power management system.

  Maybe that's the problem. The new battery is fully compatible?
  Satellite A660/15J is an Australian mobile phone model.
  Here, I found some accessories for this model:
  http://www.MyToshiba.com.au/products/computers/satellite/A660/psaw3a-15j06t/accessories

  Compatible battery are:
  Toshiba battery (12 cells / 9000mAh / Li-ion / 10.8V) PA3819U-1BRS
  Toshiba battery (6 cells / 5600mAh / Li-ion / 10.8V) PA3818U-1BRS

• NB200 - Action Center cannot be started

  Hello

  the last weeks I was not able to open the center of the action on my laptop, I get a message that the action center can not be started.
  I have toshiba nb 200 windows 7 32-bit

  Thanks for your help

  Hi al1707,

  Using some security software that block the start-up of the Action Center? Just try to disable the security software and try again.

  Also, check if the Security Center service runs. You can check this in Windows Services (start > services.msc).

• Satellite U400 - request password BIOS I don't know

  I had the same problem with a U400!
  I didn't put any password, but at the beginning, I received a message from BIOS password, request password!

  Thx for help

  Hello

  Are you sure that you don't l l set a BIOS password?

  I put t know why it happened, but an authorized service provider can remove the password for you.
  Go to buy it closest, a café and the technicians will remove the password. ;)

  Welcome them

• Action Center problem of address with spybot says stop working correctly

  Spybot does not correctly... stop 58 times... I ran spybot and its seems to be good, no threat found... but sometimes Action Center to give me this message

  Perhaps you should bring this issue to the Spybot forum.

  This forum is for Microsoft Security Essentials.

• "Extract all...". "request password on some files inside the zip, but no password was used to create the zip file

  I created a zip of a directory tree file using "send to...". "'Compressed (zipped) folder '. When I try to "extract all...". ", he asks me a password for some (not all) of the files in the zip file. I does not have a password for the zip file. I didn't even know it was possible to have a password on a specific file in a zip! Needless to say, I can not give the password because I don't know what it is.

  I tried the following:

  (1) created with "send to...". "Excerpt from" compressed (zipped) folder ', with 'extract all... '. ». Result: request password.
  (2) created with "send to...". "" Compressed (zipped) folder ", extract with 7 - zip. Result: No password query. All the files extracted intact.
  (3) created with 7 - zip, extract with "extract all...". ». Result: request password.
  (4) created with 7-zip, extract with 7 - zip. Result: No password query. All the files extracted intact.

  What I find most interesting is (3).

  Does anyone have an idea of what's going on? Is there some kind of security on the files meta-data that could / should cause this behavior?

  System information:

  XP Pro 2002 SP3 on MS network (I have no idea what server, etc..)

  Hi ruborg,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• Request password to the login screen when you try to access Outlook Express. He has never done this before.

  Request password to the login screen when you try to access Outlook Express. It appeared suddenly.
  (I recently bought phone and set up by my family could have invited)
  In any case-"main identity is the identity alone on the login screen. I need password to manage identities. Can I by pass? This means a first time trip into the bowels of the registry? or I can avoid this.

  original title: express outlook for connection screen password
  Then we will try this password to logon OE.
   
  Outlook Express keeps to request your password
  http://www.dougknox.com/XP/Tips/xp_oe_passwords.htm
   
  Save the password setting will no longer exist in Outlook or Outlook Express
  http://support.Microsoft.com/kb/290684 

• I can't use windwo Defender, my pc show if you use another application to find the unwanted malicious software, use action center to cheack app status

  "I can't use winddow Defender, my pc show' If you use another application to find the unwanted malicious software, use action center to cheack app status."
  Please help me solve. Thank you

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Phoenix-AwardBIOS CMOS Setup Utility request password it says invaild

  my ex-friend has something to my computer then took it attaches from his friend-friend and when I got back the name of the system is changed, I think my proccessor changed because all my pictures have disappeared and other pictures are in my computer when I press F10 when I turn on the computer as Phoenix-AwardBIOS CMOS Setup Utility request password it says invaild so I don't know that it has been changed. so my question is how do I get control of my computer again and go to the BIOS CMOS Setup on my computer utility?

  You can check with the motherboard manufacturer for instructions to reset the BIOS password.

  "About questions about hardware BIOS password reset, we ask that you direct customers to the appropriate resources on the sites of manufacturers of equipment for the correct procedure."

  Maintaining secure passwords - Microsoft strategy on getting around passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Fix It Center request "Please enter your product code for 36 character" for an installed program

  FIX COMPUTER CENTER REQUEST "PLEASE ENTER YOUR PRODUCT CODE FOR 36 CHARACTER" FOR A PROGRAM INSTALLED.   How and where can I find it?

  Who solve this running?

  What is the program install and uninstall tool? http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  There is more information about this tool here: http://blogs.msdn.com/b/astebner/archive/2011/11/23/10241056.aspx

  You can use the program which is linked to on this page to the list of installed programs and their product codes:

  http://blogs.msdn.com/b/astebner/Archive/2005/07/01/434814.aspx

• Warnings from Windows 8 Action Center that McAfee and the Defender is not activated after Windows update.

  In December 2012 after installation of the updates of Microsoft Windows on my machine Windows 8 and rebooting, my icon downtown Action system gave 3 warning messages:

  The spyware, antivirus and Firewall wasn't turned on do not.

  When I was in the center of the Action, he said time Windows Defender and McAfee have been disabled.

  I ran Mcafee checks as well as the defender and it states that my machine is virus-free.

  I clicked on Mcafee and it said all were lit.

  I called Mcafee technical support and they did something in December 2012 and has solved the problem and none of the messages is new. They do not just turn off messages in December 2012, they did something, but wouldn't discuss what has been done with me.

  However, today, Jan 8/13, another set of Windows updates have been installed by Microsoft and yet once again, the WARNING messages 3 came.

  I called McAfee support again and said that I didn't call each month when I install the updates of Windows to solve the problem and that there is a bug with Windows 8 and McAfee.

  I looked at the tech of McAfee as he did helpline (I work in technical support as well) and what he did this time was to turn off Action Center messages, thinking that I DINA realize that it was not really solved the problem.

  I told him, I understand that it seems that McAfee is not working properly, but I will not renew my McAfee Dell subscription this March/13 because that doesn't solve anything... it's just disable the warning messages. (I showed her that if I turn on the message, the warnings were still there... apparently he was shocked that I knew what I was doing).

  He said that McAfee is a problem with Windows 8 and McAfee and are working on a fix.

  The tech told me to get in touch with Dell and they would provide a fix.

  This problem does not occur with my Alienware Windows 7 pc and installation of Windows 8 I received is on my other pc from Dell.

  Is someone can you please tell me if there is a fix for this?

  I will not renew my McAfee subscription if it comes to the type of service that will be provided; I'll go with another antivirus program.

  Thank you

  

  

  
  

• Cannot connect to Virtual PC request password

  I can not connect on virtiual PC. Is request password and still does not open. He can not find 'settings' to change the option.

  What is a Virtual Machine XP Mode?

  You have created all users, or is it the default user, called XPMuser, you log on to?  Have you tried without password?

  If you disable the integration features of parameters by means of Machines C:\Users\usernamexxxx\Virtual, highlight the file corresponding to the .vmcx XP, you will see the settings tab in the toolbar to explore above.  Here you can disable integration features.  This is done, you should be able to launch Safe Mode via pressing F8 at startup of the virtual machine and possibly access the administrator account integrated via a blank password.  Then, you could look through control panel user accounts.