Action Script 3 code to display subtitles in the FLA file created using CS5

Similar Questions

• Action Script 3 Code to play and stop a file Fla or external Swf using game, stop button, in, the FLA file

  Thank you for all the answers before.

  I need a code Action Script 3 humbly for playing and stopping at a file Fla or Swf external button Play or Stop in Parent Fla or Swf file.

  I should have the opportunity to revisit the Fla of Parent file of the external file using the key.

  For example: I 'Introduction' Fla that has a button to play an external Fla called "set up."

  And in the 'set up' ALF, there is a button to play 'Introduction' in Florida.

  Kind regards

  God bless you

  the eaiest way is to use the content property of your charger (cast as sprite or movieclip) to reference the main storyline in the loaded swf file, and to use parent.parent to the timeliine of reference containing your charger (assuming that it has been added) go up again as the appropriate object.

• Script alert: "Sorry I couldn't treat the following files" (Error Message by using the Image Processor)

  I am a seasoned Photoshop/Bridge CS5 user who has recently upgraded to CS6.  In bridge I ran my first batch of Image Processor, trying to convert a set of RAW. NEF files. PSD files with a basic editing action that I created apply them.  Photoshop CS6 opens the bridge files and applies the actions, but then I get the error message "alert of Script" "Sorry, I could not deal with the following files" and a list of all the files in the batch, I tried to run the script on.  The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but will not close unless I close them manually.  I never had this problem in CS5 where would apply the actions that you want to the batch of photos one at a time image processor, then save and close.  Reflections on how I can fix this bug?

  Get your number of history States. I moved mine the default of 20 to 60, and all is well. For the record, this action does not work on 16 and 32 bit.

  Remove resetting of the State history, you will get into trouble if you copy more than one file type. If you go with the change above, I would recommend only with one type of output at a time.

  The script should probably define States of high story then put back to the end. The problem with this, is that machines perhaps isn't able to handle the large amount of stages of history. Which means, hit the stages of history can lead to 'out of memory' or "scratch disk is full" errors.

• Action Script 3 code works does not start and stop button?

  OK so I have what I have created simple animations of a circle that moves from one side of the stage to the other. I have added a new layer and named her buttons. On this layer, I added 2 buttons. One for the beginning and another to stop. The goal is to get my circle to pass from one side of the stage to the other, but be able to use my buttons so that I can start and stop times random animations during playback. I've corrected all my faults of the compiler now the problem is that whenever I click on the start or the stop button, I get an error output. I have a 3rd layer which is called actions and that's where all my code is displayed. I removed this layer and put my code in the first frame of the layer of buttons to see if that would change anything but I still get the same errors of output. So I just added back my layer actions. What could I do it wrong? I made sure to name all of my video clips and buttons correctly and I even added an instance name for them.

  Here is my code and errors I get when I press play and stop button - test

  start_btn.addEventListener (MouseEvent.CLICK, startCircle);

  stop_btn.addEventListener (MouseEvent.CLICK, stopCircle);

  function startCircle(e:MouseEvent):void {}

  Circle.Play ();

  }

  function stopCircle(e:MouseEvent):void {}

  Circle.Stop ();

  }

  
  green_btn.addEventListener (MouseEvent.CLICK, greenCircle);

  red_btn.addEventListener (MouseEvent.CLICK, redCircle);

  function greenCircle(e:MouseEvent):void {}

  Circle.Play ();

  }

  function redCircle(e:MouseEvent):void {}

  Circle.Stop ();

  }

  Here's my output errors-

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at exercise2_fla::MainTimeline/redCircle()
  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at exercise2_fla::MainTimeline/greenCircle()

  What timeline you want to stop?

• How to put the name of the Module file and use the current file name in the code?

  Hello

  I create SequenceCall (in MainSequence), but there must be the Module file name and existing file where the module. I found an old function that are not part of the API (TS_SequenceCallModuleSetUseCurrentFile() and TS_SequenceCallModuleSetSequenceName(). Those who are in the help file, but not in tsapicvi.c.

  You can help someone with this (CVI code)?

  Best regards

  branar

  Hello

  Problem is solved using different fp (tsadpcvi.h, tsadpcvi.c). Instead of using tsapicvi.c with TestStand 4.2, the missing functions were found in tsadpcvi.c with TestStand 2010).

  Best regards

  branar

• Display the HTML file by using content presenter

  Hello

  The default content presenter displays content from a single html file in a page as expected. But I tried to show all HTML files in a folder. He has not worked as planned.

  should what adf component I use to view the html file?

  For example, we use af:image in content presenter to display image from a folder files.

  I use jdev 11.1.7.0 with the last extension of webcenter.

  Thank you

  M Chambers

  Hello

  Try af:inlineFrame to display html content.

  Hope this works

• Where HTML5 code indicators are stored in the Configuration file?

  There is a bug in Dreamweaver CS6 where HTML5 code (and perhaps others) indicators stop working when you install ColdFusion 10 for Dreamweaver extensions. If you uninstall the ColdFusion extensions while the HTML5 code indicators work again.

  I want to keep a copy of advice to code HTML5 and then 'paste' returning to after installtion Coldfusion extensions so that Dreamweaver has all the indicators in code, he should have. Why Adobe did not worth to test their software code hinting is beyond me, especially when Coldfusion is one of their own products! But anyway nobody knows where HTML5 code indicators are stored for tags like < header > and < footer >?

  The control of the code hints for the languages based on tags is in a file called C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS6\configuration\TagLibraries\TagLibraries.vtm. It is in a similar situation on other operating systems.

  However, any changes made to the indicators of code based on tags is loaded from the TagLibraries folder in your personal configuration file (see http://forums.adobe.com/thread/494812 for its situation on different operating systems).

  I suspect that what has happened is that the one that created the extension of code hints ColdFusion 10 added new CF tags to an older version of TagLibraries.vtm. This would explain why the HTML5 code hints disappears. Dreamweaver always uses the version of the TagLibraries.vtm file in your personal configuration file if there is. As soon as you uninstall code CF10 indicators, Dreamweaver deletes your personal configuration file TagLibraries.vtm and to using the default version in the configuration of the main program file.

  Since you are comfortable coding with ColdFusion, you should probably have little difficulty to change the version of the TagLibraries.vtm file in your personal configuration file. Simply copy the first element of to the default TagLibraries.vtm and use it to replace the one created by the expansion CF10. You should then have CF10 both indicators HTML5 to code.

  I'm pretty sure that will fix the problem for you. But you should file a bug report about the extension. The ColdFusion team is completely separated from the DW one, and from what I've heard, they do not communicate much. It should be a trivial matter for the CF team to update their extension.

• Adobe has fixed display location of the PSE11 file?

  There is a bug for a long time, dating back at least PSE6, reported by many users many, sometimes folder location view to show the photos in the wrong folders. This makes the folder location view unnecessary. This often occurs after the user has used display location of the folder to move photos or folders from one folder to another.

  
  Adobe: Please indicate clearly whether or not you have fixed this bug

  Other: If you have PSE11, report your experiences regarding this issue.

  Thank you.

  Display folder location has been completely renovated in PSE11 and these issues happen. The left in the Organizer pane would indicate all managed folders (i.e. where media was imported) in the form of a list simple and if the user wants he can pass to the hierarichal view.

  Also, there are many improvements of performance using the location of the folder in PSE11.

• I tried to write code to a timer in action script 3... I have the...

  I wrote this code and I don't know how to finish it... any help would be great.

  var targetDate:Date = new Date (2012, 3, 5);

  addEventListener (Event.ENTER_FRAME, loop);

  function loop(e:Event):void

  {

  var nowDate:Date = new Date (2012,00,24);

  Ms: Number var = targetDate.getTime () - nowDate.getTime ();

  var sec: Number = Math.floor(6220800000/1000);

  var min:Number = Math.floor(6220800/60);

  var hr:Number = Math.floor(103680/60);

  var day: Number = Math.floor(4320/24);

  s = s % 60;

  min = min % 60;

  HR = % 24 hr;

  daytxt. Text = day.toString ();

  hrtxt. Text = (< 10 hr)? "0" + hr.toString (): hr.toString (); "."

  mintxt. Text = (< 10 min)? "0" + min.toString (): min.toString (); "."

  sectxt. Text = (s < 10)? "0" + sec.toString (): sec.toString (); "."

  }

  :

  var targetDate:Date = new Date (2012, 3, 5);

  var s:Number = (targetDate.getTime () - Date () .getTime (new)) / 1000;

  var t:Timer = new Timer (1000,0);

  t.addEventListener (TimerEvent.TIMER, loop);

  t.Start ();

  function loop(e:Event):void {}

  s-- ;

  var day: Number = Math.floor (s /(60*60*24));

  var hr:Number = Math.floor (s /(60*60)-day * 24);

  var min:Number = Math.floor(s/60-hr*60-day*24*60);

  var sec: Number = Math.floor(s-min*60-hr*60*60-day*24*60*60);

  your_tf. Text = formatF (day) + ":" + formatF (hr) + ":" + formatF (min) + ":" + formatF (sec);

  }

  function formatF(n:Number):String {}

  var s:String = n.toString ();

  While (s.length<>

  s = « 0 » + s ;

  }

  return s;

  }

• Question about variables and actions put forward in CP7 - display button once the user has clicked on many areas of click

  Hi all

  Can't seem to understand this one. I had assumed it should be fairly easy, but not... I'm quite inexperienced with variables so, maybe someone could help?

  Basically, the case is quite simple: I want a next button to be invisible until a user has clicked on several areas of click on a slide. Each box click click should disclose additional information on a topic. When all topics have been read, I want the nest button to appear.

  Any suggestions on how I could do it with as little effort as possible? Maybe I don't even have to use variables?

  Help much appreciated!

  Rgds,

  Casper

  Here's a forum thread where I introduced myself as a combination of two decisions:

  Re: Can I use conditional and advanced actions on the same button?

  An old article in which I have explained how to combine a standard action with a conditional: combining conditional in a fast action and standard

  Slightly different, because there is a sequence (which is not the case for you) and so that a variable is required: Blog after Posterous? - ClickClick - Captivate blog

  Learn more about the possible events to trigger actions: http://blog.lilybiri.com/events-and-advanced-actions

  Lilybiri

• Hello, how to call C++ of action script 3? or how to access the materials with

  Hi, now I want to know whether or not there is a method to call (dll, activex, com) C++ code in actionscript 3.0?

  or if there is no method to capture images of the camera?

  Thanks in advance!

  Hi there you can get images from webcams easily, read the Flash or Flex

  LiveDocs for this. And there is a project called Alchemy which is in Adobe

  Laboratories that can convert C++ libraries in AS3 files.

• How to display records from the xml file

  Hi all
  I created a region his area of research in reality
  with 5 elements and array of result area
  
  I want to search records based on the 5 elements and want to view output table
  
  
  I have the table name as hr_api_transactions, which contains many columns
  
  
  
  and also, this table contains a column
  name TRANSACTION_DOCUMENT of type CLOB()
  that files xml columns for each record
  I want to extract data from this xml file and want to display.

  Instance of the view - put the name of VO with which you are extracting data

  Discover the attribute and the attribute of file View - could see attribute by which you found the content of the file

  File name substitution - is not mandatory, let him

  The MIME type of the file: do not place anything, need to better manage programmatically through. Put the code in the below processRequest() method

  OADataBoundValueViewObject contentBoundValue = new OADataBoundValueViewObject(downloadBean,
    "FileContentType"); // here "downloadBean" is bean of message Download item
  downloadBean.setAttributeValue(FILE_CONTENT_TYPE, contentBoundValue);
  

  -Anand

• Code can be extracted from the .bar file

  Hi all

  I'm a little uncertain on what I understand the .cod files seem to protect your code from others seeing, but if someone has a playbook application .bar file, can they get the code it?

  Thanks in advance for this compensation for me.

  Easily, if you mean, by 'code', the code compiled. Get the original source is not possible, but getting something closely resembling the original source is pretty easy using "decompilers' commercial.

  The .bar himself file is just a .zip file. Extract using a standard zip tool (or rename to have a .zip extension, if that's your only way to do this) and you will see what is in it. The .swf was ActionScript3 bytecode, which is actually the "machine language" for the virtual machine AVM2 which contains the Flash 10 runtime to run your program.

• Display disappears after the period of non-use. The display is fine (a plasma), the computer is running. But no display and must restart.

  Hi-for no apparent reason, the computer has developed the following: after a period of non-use (always on computer), when I re - turn on the monitor I get a black screen.  Using the mouse, knocking every possible key produces no image on the monitor.  Meanwhile, the hard drive is very hard.  Only the appeal should restart.  Any ideas?

  As I said it's a guess.

  Let us know if find you the solution.

• How to convert (Action Script 3.0) .as files to work on HTML5 Canvas?

  So I did an ActionScript 3.0 game in CC animate using files as with packages and classes rather than use actions for example

  There is a Game.as file:

  package
  {
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.utils.Timer;
  
    public class Game extends MovieClip
    {
    static var ship:MovieClip;
  
    function Game()
    {
    ship = new Ship(stage, 200, 100);
    var spawnTimer = new Timer(3000);
    spawnTimer.addEventListener("timer",spawn);
    spawnTimer.start();
    }
  
    function spawn(e:Event):void
    {
    var enemy = new Enemy();
    stage.addChildAt(enemy, 1);
    }
    }
  }
  

  I used the commands > convert to other Formats of Document and you select HTML5 Canvas. When I run the project all the code does not work because the .as files are not related to the project (because it is a HTML5 Canvas). So, how can I convert my project an ActionScript 3.0 for a HTML5 Canvas so that the scripts work in the game? Should I use. JSFL files? How to bind the?

  Thanks in advance.

  There is no external class in HTML5 Canvas Javascript file. Also, the variables are not typed. Symbols belong to the library, which will be shortened to 'lib '. You can define listeners on the createjs. Ticker, but using setTimeout() is a simple alternative.

  In view of this, your AS3 could be something like this:

  boat var = new lib. Ship();

  Ship.x = 200;

  Ship.y = 100;

  stage.addChild (ship);

  setTimeout (spawn, 3000);

  spawn() {} function

  enemy of the var = new lib. Enemy();

  Enemy.x = Math.random () * 500;

  Enemy.y = Math.random () * 400;

  stage.addChildAt (enemy, 1);

  setTimeout (spawn, 3000);

  }