action to stop on a layer

Similar Questions

• Flash Action film stops but another layer set to loop

  Hi, is it possible to put an order for a film stops, stop();
  but still have a layer in your looping flash animation?

  For example, I need the movie to play for bar 1-50, then a stop, but I have an animation in a loop that I always have to run.  How can I turn off for my film but activate the animation I created for always loop?

  Create the animation loop as a separate movieclip.

• Stop the script of the game action 3 for mp3 on layer

  I have this play the wrong way to write a stop for mp3 on layer.

  I have buttons and sound in a movieClip.

  I'd give outside movie clip the instance name

  Thank you

  play_btn.addEventListener (MouseEvent.CLICK, playSound);
  stop_btn.addEventListener (MouseEvent.CLICK, stopSound);

  function playSound(e:MouseEvent):void {}
  This.Play ();
  }

  function stopSound(e:MouseEvent):void {}
  Stop();
  }

  The code that show you should work, so you might have some problems of implementation.

  For the stop error, you should go in your publishing settings, then select the option to allow debugging for the error includes a line number for what is causing the error.  A 1009 error indicates that your code is trying to target an object any does not exist for as far as the code sees it... that can be due to a number of reasons, such as the assignment of code in a frame where the object targeted does not exist.

  For the second error, it seems to be a problem loading (or possibly find) the file.  Made his debut playing on its own when you first run the code?

  Usually a mistake any will prevent a file works properly, so it's just a matter of setting a single one of them.

  Normally, you don't have to wait for an audio file load completely before running a reading order... which woiuld be counterproductive to the concept of sound diffusion.  In theory, a game following command that runs a command to load but the sound starts until a sufficient buffer exists.

• Batch Actions to stop in the Middle for reasons unknown

  I use measures to process multiple orders on the images for various projects for many years. I'm doing action sequences very complicated to resize, move, compile in other images, etc. I have a printing company and use it quite often to simplify my life what he does, did at least with my older Photoshop (CS3) and iMac (2006). I usually have to find a solution to a given problem, but since my upgrade to a new iMac that comes with El Capitan, I find that stocks me are so familiar with encounter problems or hiccups which is very very problematic in my workflow. Hundreds of images are now not transformed and so I have to make each game individually. I find that even a few more simple action sequences do not work. I receive guests as the joint or he "cannot find the group" I asked (when it is) even if it working again if I try again it (manually through each step) and then he manages both following will auto. It feels like if I do it manually it works 100% of the time while some lots may work as well as 75%, but some are more than 50% or less successful. It seems therefore that the problem is more random and not user error. I can find user error problems.

  An example where it stops is let say I have a document with three images in three distinct layers next to each other (on screen). I decide to add a line to the center of one to give the impression that the images are separated by a line. So in the process of resizing and compilation of documents into one, this simple command to add a line to a picture stops the action sequence. If I go back and redo manually, this will work fine. Also as I said put into images in a group by selecting or deselecting a layer can also cause this process to stop.

  My hunch is that because this computer is so fast he disrupts the measures and actions Photoshop cannot follow so it stops... half the time. I thought maybe give less RAM (memory usage) for Photoshop. At the moment it is in the ideal range (70%). 6710 MB is available. Ideal range: 3690-4831 MB it is fixed at 4697 MB.

  I'm not familiar with this kind of thing since I have never had to do. I was planning on adding more RAM on my computer since I bought stock, but maybe someone with this kind of problem or someone who knows what is happening can give me some comments or solution. It's really annoying.

  * On a side note. When the batch of measures or open multiple files at the same time it seems to be a random character at the opening of the files. I found that this was the case with my old system/computer set up. Why cannot open files in alphabetical order or in an order, that we control? So when we do all these action sequences that are alphabetical or sequential, we deal with this problem. I normally have to renumber them in another folder, and this is just a fix for this problem. I know that computers aren't perfect, so always go around some questions and the more complicated a process most likely for a few hiccups, but this seems very messy for me or it's a compatibility issue.

  

  My hunch is that because this computer is so fast he disrupts the measures and actions Photoshop cannot follow so it stops... half the time.

  T affecting playback Options' step by step ' make a difference?

• Disable actions to stop smoking

  I want to disable quit and cross buttons to prevent users from indesign to quit smoking. It's because I make a few additions that might be pending when a user presses quit.

  I found a few links

  A menu entry is activated

  How to cancel the termination of Indesign.

  I know I have need work on kQuitActionID, but do not know how to proceed. Advice will be useful.

  Thank you

  I ended up intercepting the commands kQuitCmdBoss, kCloseAllAndQuitCmdBoss. I think that's not a good way, but from now on, I'm out of options. I was able to intercept the kQuitActionID but it did not stop the action of the cross button.

  Someone else knows better?

• Do the Live Action like stop motion

  I'm giving live action video a stop in first adobe motion effect. Is there an easier way to do this, rather than delete each unwanted image?

  Too bad, I was looking for the duration of Posterization effect.

• Video clips as buttons - regardless of my actions to stop and event listeners

  OK, so I think I'm along with related good files to show you guys! Learning just about everything, so forgive my ignorance so far!

  In any case, I'm just trying to understand movie clips as buttons and followed along on Lynda.com - however, I seem to do these things, but when I test my movie, the button loop just independently the bearings or the actions of the judgment.

  You can check this address www.midnyc.com to see anim failed, and you should be able to import as well. Here is my code:

  reversal function (e: Event) {}
  myBtn.gotoAndPlay ('in');
  }

  myBtn.addEventListener (MouseEvent.MOUSE_OVER, reversal);

  function implementation (e: Event) {}
  myBtn.gotoAndPlay ('out');
  }

  myBtn.addEventListener (MouseEvent.MOUSE_OUT, rollout);

  Thanks in advance for your help. And in KGLAD, thank you for recommending how publish a little better! Given that I've ever had links etc... Sorry about that.

  Do you have any kind of error messages?  Normally if there is an error in coding, clips and other things go haywire.

  For you, the event handler functions, try to specify the event that corresponds to the event of the listener...

  function implementation (e:MouseEvent) {}

  I think that 'EVENT' would be a mistake anyway... 'Event' would be correct

• CS2 - automate process cancels when 'Stop' is encountered in Action.

  To resolve this problem, I need Photoshop 'Action' and 'Automaton' advice.  I used Actions and automates many times successfully, but have not encountered this problem before.  I use Adobe Photoshop CS2 with Windows XP, Service Pack 3.   I am trying to automate an Action on a folder containing multiple files of the same size in order to perform the Action automatically on all the files in the folder.  Accordingly, I have set up at the entrance and exit as "Folder" with "Override Action"Open"commands" and "Override Action"Save"commands", respectively.  Action entered an image of a stereo pair and insert a 4 mm strip of wide canvas between two images.  I also use the feature very useful name on the output change.

  The problem is that the Action requires a 'Stop', so that I can place a layer "glued" the left-image correctly above the layer of the image on the right which includes a slightly enlarged canvas.  This 'Stop' is necessary, because the recorded Action, when "played" on different files, inexplicably not always 'stick' layer left in the same place on each file.  As a result, repositioning properly must be done manually for each file.  I tried to do the 'Stop' needless, but without success.  But it is such an small interruption for each file that the Action with a 'Stop' would still be useful if I could automate it.

  The problem is that when I use the controller function as described above, when I come to the 'Stop' command, I have to press the "Stop" button in the message window to stop in order to position the left layer manually.  Apparently, this interrupts the process of the automaton, because, when I finish the manual positioning and return to Action by pressing 'Play' triangle icon at the bottom of the range of the Action, the Action ends, but that he does not continue with the next file in the folder.  He also finished without invoking the: 'Rename' model of the configuration of the automaton.

  Bottom line issues: How I can either:

  1. enable the routine of the PLC to continue after I "quit" to make a manual adjustment?

  -OR-

  2. perform manual adjustment, I need continuously the 'Stop', which puts an end to the routine of the automaton?

  If you wish to discuss instead of laboriously typing a response, please do not hesitate to call me at the (310) 635-2400.   (If it is an expensive call to you, I can call you back immediately).

  Kind regards

  Dean Oliver

  Maybe for the point in the action where you want to the

  manual adjustment, you can use Edition > free transform

  dialog box turn on.

  The action would stop and you can move the object

  and then validate the transformation and the action must continue.

  

  MTSTUNER

• stop in video action

  I have a simple clip that animates a text and a divider bar. The loops which is normal, I would like to add a stop action to stop the loop.

  I have three layers; text, divider_bar and actions. On the layer actions, I have past stop();  on the last image. This prevents the clip very well. But if I go back and play again the clips of film remains on the last restart of the frame and custom. I use Action script 2 and even tried to use 3 with a bit of luck.  Any suggestions?

  I need the clip function and or restart when the page is loaded or refreshed.

  Thank you

  Dale

  You are welcome.

  p.s. If you can, please mark this thread as answered.

• AS creation on a layer actions and frame 1 of the main timeline

  / * Set up files, this program works 'actions are directly fixed on the buttons.
  the instance names:
  ball_mc
  start_btn
  stop_btn
  
  The clip of ball is a simple animation that bounces a ball up and down, I dragged an instance of the latter staging and added ball_mc.stop; for a layer actions, I created in the main time line.
  
  I added the following to the start_btn * /.
  {We (Release)}
  This.ball_mc. Play();
  }
  
  I added the following to the stop_btn
  {We (Release)}
  This.ball_mc. Stop();
  }
  
  This program works. I simply press the start and stop buttons. And the clip ball_mc instance
  symbol start / stop when I press buttons.
  
  / * I'm trying to access the same buttons through the main time line. I have put all my actionscript on frame 1 of the layer and the same 'a layer called actions' layer actions. Here is the code I tried, but the ball_mc will not start or stop. Here's the code I used: * /.
  
  This.ball_mc. Stop();
  This.start_btn.onRelease = function() {}
  This.ball_mc. Play();
  }
  This.stop_btn.onRelease = function() {}
  This.ball_mc. Stop();
  }
  
  I hope that I'm not asking something as stupid, I tried just about everything I could. That's why I ask your help now.
  
  Thank you
  Dennis

  remove the 'this' (s) of your codes:

  ball_mc. Stop();
  start_btn.onRelease = function() {}
  ball_mc. Play();
  }
  stop_btn.onRelease = function() {}
  ball_mc. Stop();
  }

  'this' inside a function can refer to the object assigned to the function.

• & quot; Stop & quot; Action does not

  I made a new file Flash (CS3), Action Script 2.0, and layer 1, I imported a sequence of 10 images. It is therefore 10 images, image by image. Layer 2 contains my Actions. I chose image 1 (in layer 2), assigned a "stop()"; code in the menu script. However, the sequence plays through, rather that stop at frame 1. It ignores the "stop" action assigned to frame 1.
  
  EDIT: I should have tested adjuster to-> TEST MOVIE. Problem solved.
  
  Thank you-

  I made a new file Flash (CS3), Action Script 2.0, and layer 1, I imported a sequence of 10 images. It is therefore 10 images, image by image. Layer 2 contains my Actions. I chose image 1 (in layer 2), assigned a "stop()"; code in the menu script. However, the sequence plays through, rather that stop at frame 1. It ignores the "stop" action assigned to frame 1.

  EDIT: I should have tested adjuster--> TEST the ANIMATION. Problem solved.

  Thank you-

• Animation loop infinte on a page with a "stop" action

  I am building an application where each 'page' has a point (marked as a label) where the visibility of the page turns on.

  Each page has a 'stop' so that the entire chronology isn't fair play, so simply go through all pages without the users say it.

  Now on the first page, I want an animation looping indefinitely. With the action stop in place, is it possible?

  Thank you

  As soon as I asked the question, I managed to understand. Instead of moving an action to 'stop', I simply add an action of "play of ' and the link at the beginning of the page, thus looping. I'll use buttons to navigate to other pages/parts of the timeline.

• How to stop the action to enter text?

  As a step in an action, I create a text layer. I need to pause the action so that the user can enter text in the layer. I have to pause the action by clicking the dialog icon turn left the stage to create the text layer. However, I can't find a way to continue the implementation of the action after the text entry. What is the right way to do it? Thank you.

  By pressing the box check Commit on the toolbar options or by pressing the Enter key should continue this action after the text is entered.

• [Q] actions - duplicate layer

  Hello.

  Is there a way to tell the PS, so he'll duplicate X layer "document-1"?

  When I record and duplicate it records strictly on the document are not "document"-1 or + 1 or + x.

  Your solution is directly related to the number of files you have open, and the order in which they were opened or created.

  In your action, you will shoot the layer you want to duplicate.

  Select > all

  Edition > copy

  Then using hotkeys Cmd/Ctrl + ~ you can sail in the target document.

  Edition > paste

  As an example, if you have 3 open documents and work on the first open (if left tabs) the keyboard shortcut will progress and be registered as "Select next document" then "select next document" and so on.

  If you start from the last document it will be recorded as "Select document - 2", then "Select next document.

  Positive numbers (+ 2) will be saved if you add the SHIFT key. The actual number depends on the number of documents you have open.

  So when you play your action, you must have the same number of open documents and in the correct sequence, such as when you have recorded the action.

  Alternatively, you can save a duplication of a layer to a specific document but note that the name of the document will be saved in the action so if this document is not available when the next action runs, it will fail.

• Stop(); Action does not work in AS3?

  I am a designer and usually work in AS2.

  But I created a movie in as3 (to use the function of the BONE), and now my actions to stop do not work.

  What I usually do for my movies, it's breaking down the film in some parts of the main timeline (content, start, end), place stops on each of these frameworks.

  And in the clips that play on these labels, I put a call:

  Stop();

  _root.gotoAndPlay ('content') etc...

  in any case none fixed this in AS3?

  I use CS4 if it matters.

  The stop() command works as well in AS3 as it does in AS1/2.  What does work is to use AS2 terms such as "_root".  In general, if a stop() command does not is because another code's fault or otherwise of the substitution of the stop().