Stop(); Action does not work in AS3?

Similar Questions

• "set the restart target action" does not work, why?

  There is an element of "set the restart target action" in the SDF file. I put it to "run a system definition.

  

  But it does not work. I don't know why. It seems that when the project is canceled, the SystemDefinitionData.nivscfg file is deleted.

  

  Cancel the deployment of will stop the configuration and mark idle.

  If you restart the RT target by HW button or through the channel "System of command channels", while the configuration is active, it will start the Setup again after the reboot.

  Jiri K.

• Game audio action does not work in Captivate 7

  Hello

  On the first slide in my class, I added a "quick start" guide It consists of a series of legends that contains text. In each legend, there is a text link "Continue" triggering a tip action to hide the current legend / show the following. This works perfectly.

  Now, I tried to reach audio at each step of the guide. I added a "audio playback" action after stocks show/hide for the first step. No audio not playing. When I changed the audio of the game to be the first action in the script - the script did not work at all. When I changed it between the show and the skin, leather working and show does not. What I gather from this is that play the audio does not work and also stops all this.

  Any advice?

  Thank you

  Just checked, created an action shared with almost exactly the same commands, but grouped together all the containers in text in a group Gr_TC

  Hide:

  

  It worked perfectly. You don't see a label, because it is a common action, to which I just filled in some settings. Attached to three buttons, had 3 containers of text and 3 different audio clips.

  The audio clip plays when it is used in another way? The only difference seems to be that you have a clip of VO and I used one of the sounds included with Captivate.

  Another way would be to fix the audio on the text as audio of the object container. Once you view the text, audio will play, when you hide the text to stop. It was the way to go before COP6:

  http://blog.lilybiri.com/playtime-with-audio-and-widgets

  Lilybiri

• 'Stop' trigger does not work...

  There seems to be a fairly simple procedure:

  Click the icon for the trigger to the desired location in the timeline panel, and then click the 'Stop' button in the Panel code to add the code. I add nothing to the code. I want just a simple "stop".

  I must be missing something. Because it does not work. I reinstalled and removed the old preferences. Still does not work.

  Any help would be appreciated.

  Thanks for the file - I think I see the problem.

  You have Autoplay to the scene not checked in the properties panel. In this case, the timeline will not play until a sym.play(1000) () command is issued. You did, but it's for the btn_out label, which went from the trigger with stop at 1500 ms.

  If you select Autoplay, the timeline will play. But you have a trigger with a stop at time zero action.

  What won't happen?

  Thank you

  Joe

• Tip action DOES not work in the Flash output

  Hello

  I created a module in line with Captivate 9 using an advanced conditional action to display the button at the end of 2 sections.

  The trigger works well in the release of HTML5, but it does not work in the Flash output: users need to go back to the slide with the action advanced a second time in order to show the next button.

  It is the created tip action:

  

  Help, please. Thank you

  Lisa

  Change the order in the updated standard measure jump to slide as last order, or at least after the command of the increment.  The actions are executed in sequence, if you jump first to this slide, where the on enter event is executed, the variable has not yet been incremented. Try to see if it solves the problem. HTML is different from SWF to react (it is converted to JS so that SWF to ACE).

  You post the screenshot of the timeline.

  Moreover, as I have indicated already, I would add continue to the part of the TIME as well as the ELSE part. I learned that, in certain circumstances, a conditional action with that one decision, and no ELSE part does not work well. It is not a problem if you have several decisions.

• Tip action does not work when I add a second block of decision

  I'm writing an advanced action 8 Captivate. In response to a question about the points, the user types a number in a text entry area. When they support, the fast action will assess the number. If it is 10, the program should jump to a slide that shows that 10 is the right answer. (When I do just that in a single block of decision, it works.)

  However, the full tip action must assess if the value is higher or lower than 10, then return the user to the question slide and displays an appropriate message. When I add the part in a second decision block, advanced action performs as expected if an incorrect value is entered, but does not work if the correct value is entered. It does is display the question slide once again.

  Here is the code:

  

  Any ideas on what I am doing wrong? Should there be an ELSE statement in the first block of decision? I tried to continue, but that did not help.

  -Stuart

  The logic of your advanced action is not correct. All decisions are always evaluated. What is happening here is the following:

  1. First decision check if var is equal to 10; If this is the case, it will change to slide 2
  2. Second decision check if var is greater than 10, if it is accurate, it will move on to slide 1. I guess the capPoints1High is ON slide 1?
  3. BUT here's the logic bug: If If is not greater than 10, which is also the case when it is equal to 10, it will change to slide 1, although already, he jumped to slide 2 first with the first decisioin

  Two possible solutions:

  1. decision of the switch 1 and 2 (one easier)
  2. remove the ELSE part of decision 2 and create a decision 3 to check if var is less than 10

• I am trying to reinstall Flash CS4 professional as the script action does not work, but now I get an error: 2 message when I use the original CD to reinstall

  I can't get the original disc work on resettlement.  I get the message

  AdobeColorCommonSetRGB

  Error:

  Error 2.

  I'm teaching a class using this program on Macintoshes running 10.9.5 and action script does not work.  It will work on any program designed by using the 10.8, but if you create an animation on 10.9.5 the action script will not work for buttons

  You must manually remove the color in question profiles... Run the cleanup tool and see if it's to help you get started.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Mylenium

• I can't get adobe to work and when I look in ms confing is shows that it is stopped and does not work how can I run past

  i cant get adobe flash player to work and when I look in ms confing is shows that he is arrested and does not work how can I change to run again

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• HP PhotoSmart C310a market and stop button does not work.

  Disconnect the power and rear connection does not work.  Printing is sitting at the initialization and the button does not illuminate.

  Hey jacobyaz,

  If the printer does not respond when you press the power button, you can try the steps in this video here:

• Stop(); or this.stop (); does not work in AS3.0.

  I have other actions (several buttons on the stage). I have not worked in Flash in a long time, so there is no doubt my ACE is super Basic.

  I have buttons that are supposed to go to a specific frame to indicate specific areas of a map. The clip goes right through instead of stopping at the initial keyframe.

  Thank you!

  (release) might be an ActionScript 2 way of doing things, that's what is wrong? In AS3, you should do something like:

  Stop(); to keep us on the first image;

  europebtn.addEventListener (MouseEvent._CLICK, goeurope);

  function goeurope(e:MouseEvent) {}

  gotoAndStop ("europe");

  }

  where 'europe' is the image tag on the chassis which shows Europe.

• Why push button and stop button does not work in the structure of the casing and buckle my VI? (code attached)

  I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data.  Here are my questions and dproblems:

  1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.

  2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.

  3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure.  (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)

  4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time.  I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.

  Thank you for your help

  

  

  Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

  

  Simple code goes like this:

  • Containing the main code of while loop
    • Inside of the whole loop is all user interaction code or modify the code entry
    • Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
  • Loop initialization above all if necessary
  • Closing referrals and communications, etc after all loop

  It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."

  If you are just starting, you should do a free training have the capabilities of LabVIEW.

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Script to update the legacy text (action does not work)

  So here is my scenario: I did everything select and update legacy text, but I have some problems with some type paths that are to be cut. OK, easy enough I would deselect these layers and run 'update text inherited selected' GREAT WORKS!

  Here is my delima I have 400 files .eps I do this on. Layer names are always the same, so I was wondering if there was an easy way to do it on an action. Is an action knows I'm if you deselect a layer after selecting all? Why it does not save when I

  Type > Legacy text > convert selected text?

  • Select all

  • Deselect two layers (layers compatible name)

  • Type > Legacy text > convert selected text

  Is it easy in a script to remove?

  What happens if you unlock the two layers before running the script?

• Presentation of the action does not work during the Conference

  Hello world

  Here's the background
  -CUCM 10.5
  -Telepresence conductor XC4.1
  -Telepresence Server (VM) 4.2
  -Endpoint: MX300

  I have problem when sharing a presentation at the Conference meeting.
  It doesn't seem to work.
  However, the part of presentation works with success during a normal 2-way call

  I read an article by cisco,
  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  A field is related to the function of presentation,

  Allow the content
  (Available when the preference of Service has a type of telepresence MCU Conferencing Bridge)
  Whether or not, participants will be able to send video content, such as a presentation.

  Yes: one lane will be reserved on each cascade TelePresence MCU and TelePresence MCU primary specifically for content. Use this setting to enabled WebEx conferences.

  No: the participants will not be able to send content, regardless of the number of ports available on the MCU. Content can always be displayed, since some end points provide content in their main video channel.

  The default value is Yes.

  Need MCU allow sharing feature? or I missed something?

  Thanks in advance

  Sam

  Allow that content is available only when the conference bridge is an MCU and does not apply to a server of telepresence.  The only thing you need to do within the Orchestra, is ensure that "content quality" within the model of the Conference is not set to 'Off', see the top of pg 61 of the guide that you have linked to your post.  Also, make sure you have enabled on the SIP Trunk to driver in CUCM BFCP.

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• Date - when formatting a Date using html code stopped by does not work

  I have something like this:
  -case when (STORE_RCV_DATE-order_date) > 21 then
  < F were color = "#FF6600" > < B > "| STORE_RCV_DATE | "< /B > < / make >
  Else < F were color = "#FF6600" > < B > "| STORE_RCV_DATE | "< /B > < / make >
  END STORE_D
  
  In the report, when I try to order by, it is no more considered a Date but as string, the order of looks like:
  
  29 March 09
  January 24 09
  23 March 09
  23 February 09
  22 December 08
  21 May 09
  20 February 09
  20 February 09
  
  
  Considering only the day, but not the month.
  
  I can solve this? or I can put my somewhereelse condition so it does not change the date to a string column?
  
  Thank you.
  
  Published by: Nera on June 15, 2009 07:01
  
  Published by: Nera on June 15, 2009 07:01
  
  Published by: Nera on June 15, 2009 07:02

  Html comment to ensure the correct channel you are ordering:
  -case when (STORE_RCV_DATE-order_date) > 21 then
  ''''|| STORE_RCV_DATE | "Else " | STORE_RCV_DATE | "END STORE_D.