activate Bluetooth Message profile (access map) with Z5 compact for Audi MMI

Similar Questions

• Is it possible to send a pdf that they alone can / access view with a password for a password protected?

  Is it possible to send a pdf that they alone can / access view with a password for a password protected?

  Thank you!

  Hi wonderingtoday,

  Yes, you can! If you have Acrobat, you can assign a "Password" in the PDF Open, so that only those with the password can open the PDF file. If you do not have Acrobat, you can try it free for 30 days. For more information, see www.adobe.com/products/acrobat.html.

  Best,

  Sara

• I get the same messages code and error with Windows Mail for a week that the person in the previous announcement.

  It seemed to have started running last week when we had a huge update of Windows.  Windows Mail does not connect to the top through our wireless network.  He tries to go through several dial-up non-existent.  It is not a problem with my server.  I checked with them.  I tried to pass even if Windows Mail, with tools, through accounts, properties.  Once I get in the window with about 8 tabs on it, I can't get into any tab, except that might do me some good.  When I click on the Connections tab, my computer hangs in Windows Mail, and I leave Windows Mail.  Is there another way to get into Windows Mail to set the connection to Windows Mail?  Is there a way to get my computer to get the network wireless set up as the connection by default because the way he is now, he won't put the connection wireless as the default connection, even if I'm signed up to this time.  It's a problem that has arisen recently and it is extremely annoying.

  Try to compact and repair the database first (see www.oehelp.com/WMUtil/) to rule out the possibility that it is a question of database.

  Then go to tools | Options | Connection and see if you can set the correct connection there.  Then go to tools | Accounts | Add | Post and add another copy of your e-mail account with the correct settings.  Before you download messages, go to tools | Accounts | Mail | The original properties and uncheck the include account when sending and receiving.  Then check mail on the new account you set up and see if it works.  If so, you can delete the old account.

  If it is still a question, then see point 3 here: www.oehelp.com/OETips.aspx#3 to exclude interference antivirus and see point 15 on this page for updates which could have done (nothing to do with your problem).

  Steve

• How to make a US map with interactive buttons for all States...

  I have a card to photoshop in the United States with the separate States. what I want to do is put this map in dreamweaver so that each State is a button... ideas?

  ImageMap

  best,

  Shocker

• Can't access internet with media center for EPG. __

  4 error number

  Check your internet connection. S.Sengupta Media Center MVP

• Cannot access wireless with linksys WRT54GS router

  Hello

  I just installed a Linksys WRT54GS router on my connection, the problem I have is to be able to access with my wireless on my laptop.

  I kept getting a message saying 'connection unindentified' 'access '. I did most of what is already on your forum that such a power out of my rooter, my modem and such and still nothing. I am able to access wireless with my girlfriend Mac laptop, my playstation 3 and my desktop computer which uses Windows X. I initially thought that it my be a problem with my security but even when the connection is unprotected I still have this error. I am trying to disable the IpV6but that didn't ' dot something or the other.

  My laptop is a Toshiba Qosmio X 300 PQX32C-033019 with Vista and my router is a Linksys WRT54GS to. 6

  Here is my connection connect you, sorry if this is in French:

  Try this-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  On your Vista laptop, first turn off the wireless network connection and restart the laptop, and then enable the wireless connection...

  Then click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows , and then restart the laptop, now see if you can connect to the Internet wireless...

• Advent 6651 activate bluetooth no icon not showing in Panel, no options to correct

  My laptop Advent 6651 Windows Vista does not appear the Bluetooth icon in the control panel I have to activate Bluetooth to connect to my cell phone how can I do this

  Hello

  do not post in all capitals

  your head is all lowercase, then why do all the capitals in the body of your message?

  It makes it so difficult to read

  read this

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above don't fix contact the hardware manufacturer or contact the manufacturer of your computer

• Remote access VPN with ASA 5510 by using the DHCP server

  Hello

  Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

  I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

  !

  ASA Version 8.2 (5)

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 10.6.0.12 255.255.254.0

  !

  IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

  !

  Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto-map dynamic dyn1 1jeu transform-set FirstSet

  dynamic mymap 1 dyn1 ipsec-isakmp crypto map

  mymap map crypto inside interface

  crypto ISAKMP allow inside

  crypto ISAKMP policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 43200

  !

  VPN-addr-assign aaa

  VPN-addr-assign dhcp

  !

  internal group testgroup strategy

  testgroup group policy attributes

  DHCP-network-scope 10.6.192.1

  enable IPSec-udp

  IPSec-udp-port 10000

  !

  username testlay password * encrypted

  !

  tunnel-group testgroup type remote access

  tunnel-group testgroup General attributes

  strategy-group-by default testgroup

  DHCP-server 10.6.20.3

  testgroup group tunnel ipsec-attributes

  pre-shared key *.

  !

  I got following output when I test connect to the ASA with Cisco VPN client 5.0

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

  4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

  Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

  [OK]

  KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

  Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

  Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

  Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

  Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

  Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

  Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

  Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

  Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

  Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

  Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

  Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

  Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

  Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

  Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

  Kind regards

  Lay

  For the RADIUS, you need a definition of server-aaa:

  Protocol AAA - NPS RADIUS server RADIUS

  AAA-server RADIUS NPS (inside) host 10.10.18.12

  key *.

  authentication port 1812

  accounting-port 1813

  and tell your tunnel-group for this server:

  General-attributes of VPN Tunnel-group

  Group-NPS LOCAL RADIUS authentication server

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• I had one for my Ipod Touch dock adapter model MC540C/a and I wonder if I can get a bluetooth adapter that is compatible with my dock adapter?

  I had a dock adapter (photo attached) for my Ipod Touch model MC540C/A and I wonder if I can get a bluetooth adapter that is compatible with my dock adapter?  Thank you!  Luc Roy

  Just what do you mean?

  MC540C/a is a 4G iPod touch and it has Bluetooth construction

  iOS: supported Bluetooth - Apple Support profiles

• How to activate bluetooth constantly?

  Hello

  I have a Libretto U100 and I would like to activate bluetooth constantly, but at present every time that I reboot it isn't always.

  The result I want is that the wifi & bluetooth to be turned on permanently.

  Thank you for your help.

  Hello

  As you can see sometimes you expect an answer or suggestion. ;) Maybe the forum booklet is not so active as other areas. While you wait you can consult the directories user's to see if you can find something.

  Anyway, I'm not a technician but AFAIK you should leave permanent WLAN switch in POSITION and before you want to use just check BT with the FN + F8 key combination if the BT is enabled. I think that BT may not be permanently.

• How to activate bluetooth on Satellite Pro C850?

  Hello

  I'm having trouble if/how understanding I can activate Bluetooth on my Satellite C850D-12V (PSCC2E - 03300JEN). The operating system is Windows 8-64 bit.

  The technique of the product (http://www.toshiba.co.uk/discontinued-products/satellite-c850d-12v/) does not BT then, first of all, I would appreciate advice on how to check whether my laptop is equipped with BT

  If my laptop has the necessary equipment, should it be activated via the download of a driver (e.g. Realtek Bluetooth Filter Driver Package, version 12.24.0802.2012)?

  If my laptop is not equipped BT, this can be solved with a BT USB adapter? What would the specification required for a USB BT dongle? Do I still need to download a driver?

  I apologize for the issues. Despite my attempts to research answers to myself, I'm from very limited in this area.

  Any advice greatly appreciated.

  Thank you very much

  Hi Dino

  Your machine according to the specifications of the laptop has no BT module so you have to use the external device. Best solution is BT USB dongle. Visit the nearest PC store and there you can choose one that fits. Talk to your local dealer and I m sure they can help you make the right decision.

  Usually, when you buy external device driver is included for installation should be pretty easy and user-friendly.

  And please do not apologize for your basic questions. ;) If you have any other questions you are welcome.

• How can I access Comcast with Apple Mail?

  How can I access Comcast with Apple Mail? I use OS X El Capitan (Version 10.11.3). The last update of the system made accessing Comcast inoperable, confirmed twice with the Apple Support. Is there a workaround yet?

  DMcCormick,

  Read: set up messaging 9 on Mac OS X (El Capitan) for the Comcast Email.

  

• How to activate Bluetooth on Satellite P200

  Hello

  I bought a new computer Toshiba Satellite P200 - 1C7 and I do not see where I can activate bluetooth.
  I installed bluetooth monitor and download bluetooth stack.

  On the Web from Toshiba site, explained that we need to check the presence of bluetooth inside by the letter B after the number of PCs under him, but I can read BT HD L M W so I think bluetooth is in the computer.

  So can you tell me if it is or not the case and if it is Yes, how to enable it.

  Thank you very much for your answer.

  Hi Emilie

  Firstly you can activate and use the only if BT it s is available on your laptop.

  Therefore, you should check if your laptop is equipped with the BT module.

  If the BT module has been installed, then you should find a BT tag at the bottom of the unit.

  I guess that you will not find this label because your device was not equipped with internal BT module.

  See you soon

• Access platform Thorlabs APT with a joystick for motor control TDC001

  Hi I am trying to use a joystick 3 axes for control TDC001 XYZ configuration engine controllers from Active-X and APT Thorlabs platform in Labview. I already follow this link: http://www.thorlabs.com/images/TabImages/GuideToLabVIEWandAPT.pdf

  I'm able to control an axis in Labview platform APT now. Anyonw knows how can I access APT with my joystic 3 axes (either Labview or APT User Interface), so that I can use it to control the motors controllers?  Thank you!

  You try to learn programming manual from the (not-so-bad, actually) LabVIEW, you reference in your message?  If so, it would be wise to find a LabVIEW guru and get to teach you the basics of the LabVIEW programming, including the importance of data flows (and how to serialize your code using error line) and good programming Style LabVIEW ("Lesson #1 - all the diagrams should fit on a single screen of laptop , and if it's not then break down the task into sub - VI. ("" "" Lesson #2 - all sub - VI and VI is in need of an icon and a Description ').

  You don't say what the problem is that you are experiencing.  Could I guess that it involves the three-axis Joystick?  There are Joystick support in LabVIEW, but it's a little dark and a little outside the usual way of handling equipment.

  Give us a better idea of what questions you have.

  BS

  Tracyfu wrote:

  Hi I am trying to use a joystick 3 axes for control TDC001 XYZ configuration engine controllers from Active-X and APT Thorlabs platform in Labview. I already follow this link: http://www.thorlabs.com/images/TabImages/GuideToLabVIEWandAPT.pdf

  I'm able to control an axis in Labview platform APT now. Anyonw knows how can I access APT with my joystic 3 axes (either Labview or APT User Interface), so that I can use it to control the motors controllers?  Thank you!

• Activate Bluetooth Vista

  How do you turn on Bluetooth on Vista 64.  I have the ear piece. How can you PAIR the Vista OS and Bluetooth receiver headset?

  Hi preferred,

  Thanks for posting in Microsoft Communities. The problem description, I understand you want to activate Bluetooth headset.

  I suggest you to follow the steps in the article and check.

  Set up a Bluetooth compatible device

  For more information, please see these articles.

  Change settings for a Bluetooth compatible device

  The problems with Bluetooth devices

  I hope this helps. Let us know if you need more assistance.

  Thank you.