Activate frames? In what order?

Hi guys,.

I have 3 ESXi hosts with 4 VM (so far) on an iSCSI SAN.  Performance is absolutely amazing at the moment, but I'll add spread 20 more VM through the 3 hosts.

You think that I need to enable frames for iSCSI traffic?  If so, what order should change the MTU?  For example... should I change to 9000 iSCSI SAN ports, change the switch ports, then change servers... or?

What would you suggest?

I have permission to close the 4 VM this weekend if I need to.

Thank you!

Jumbo Frame must be enabled at the end... so is not an order of preference... until one piece is not activate, they will not be used.

Remember, you must turn on also on the vSwitch (in this case, you do not need to destroy).

Also, for some type of physical switches it may required a cold reboot.

André

Tags: VMware

Similar Questions

  • Satellite L500-13W - what order to install drivers on Windows 7 32 bit?

    Hello

    I have Satellite L500-13W and install Windows 7 32 bit. I have download all the drivers.

    What order of installation for my model?

    Hi jason_x,

    I agree with Akuma. Two weeks ago I also installed Windows 7 on a disk of Microsoft and after installing Windows 7, I started with installing the chipset driver. Then I installed the Intel Storage Manager, then display driver. After that, I installed the rest of the necessary drivers.

    I didn't use a special installation order. After installation, all devices have been properly recognized in device without yellow exclamation points Manager.

  • HP envy 14-2090eo: in what order should drivers installed better when you do the clean install

    Hi HP experts...

    I want to do a clean install of my Windows 7 Home premium 64-bit, and I've always used my recovery disks when it was necessary to format and subsequently updated all the drivers in the support section and drivers HP, but it is a slow process, and I'm not even in what order I should update drivers when it that way or the other , and often a message jumped ud saying ' the driver is not properly installed - try again or the driver is installed correctly. But as mentioned, I want to do a clean install with my Windows 7 Home premium 64-bit disk and would like some experts advise on order in which drivers must be installed. Can anyone help?

    Best regards hpenvy1

    Hello:

    The order generally recognized installation of the driver is:

    1 install the chipset driver and restart.

    2. install the graphics driver and restart.

    3. install the audio driver and restarted.

    4 install the ethernet driver.

    5. install the wireless driver.

    Then you can install a driver you want.

    I also do a practice to update to the latest service pack before installing the drivers, if any.

  • I try to use windows excel for windows vista and am asked for a product key. How can I find out what order to use the product?

    I try to use windows excel for windows vista and asks me to enter a product key. I am the sole owner of the computer but have no installation CD for recharge Excel. How can I find out what order to use the product? From now the product doesn't let me do anything. Help, please!

    Hello

    Did you pay for Office (including Excel) in a packaging separated when you bought your computer?

    Office is not included with your purchase of computer for free.

    Most new computers come with a trial version of Office that lets 'x' number of days usuage.

    After this test times out, you will have to buy Office.

    And the product key on the computer case or laptop for the operating system, not for the desktop Suite.

    Here is the link for the Microsoft Store to Office products:

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Office_Category_Page?ICID=Home_4up_1_OfficeCatPage

    And you might be interested in the free Open Office Suite of Office Applications.

    http://www.OpenOffice.org/

    For any other question about Office, please repost in the Office Forums:

    http://answers.Microsoft.com/en-us/Office

    See you soon.

  • Win8 drivers update (How To... what order?) Pavilion dv7t - 6 c 00 CTO Quad Edition laptop

    I am a MSDN developer and run Win8 RTM (Pro) for about a month on Pavilion dv7t - 6 c 00 CTO Quad Edition.  I was forward updates of the software/driver for Win8 OFFICIAL from HP (because my AMD video card did not work).

    Now I see Win8 pilots begin to appear... My question is, "what order should I apply these updates?  And that I should wait until ALL updates are displayed? »

    Currently

    • Audio
    • BIOS
    • Intel chipset
    • YouCam
    • Touchpad

    Updates are available for Win8

    What I REALLY need, is the AMD graphics card drivers... (Intel Graphics too well this card works...)

    I guess I should apply the updates in this order

    (1) bios

    (2) Intel chipset

    (3) audio

    (4) touchpad

    I can't REALLY afford to have this computer down!...

    Please notify

    Hello:

    I copied and pasted the correct order of your post below.

    (1) bios

    (2) Intel Chipset (restart computer after installation)

    (3) audio (restart computer after installation)

    (4) touchpad

    I highly recommend to install the updated BIOS in windows safe mode so that there is a minimum of current process.

    If she didn't say adds support for windows 8, I would have recommended does not update the BIOS.

    A too risky adventure, update the BIOS...

    There's no graphics driver out yet so it may not be your hopes to the top...

    Paul

  • When I used another key to activate the windows, what the key embedded on the motherboard.

    I bought a desktop lenovo Lenovo online - usa around 15/02/2015. the machine came with windows 7 pro. installed through windows downgrade rights 8 pro.

    but perhaps, I do not open/use the machine until 30/03/2015. After that, I have updated the system by installing updates provided/offered by windows updates.

    around 04/03/2015, when I open the computer properties, down to the title of the windows activation, there was this message "remaning 2 days to activate windows.» Activate now»

    When I click on activate now. Another dialogue box opens, indicating that the product key entered by me is not valid.

    I called mirosoft support, but perhaps, they refused to help me because I don't have the product key. (as long as no key is provided to me by lenovo, but only 8 pro windows recovery media.)

    I called lenovo support, but perhaps they also did not help me, according to them, it was a software problem, that only microsoft could solve.

    now, I had another death system (samsung) with windows 7 pro, so I used this product key to activate my windows on lenovo.

    My quiries are:

    1. what happens if God for bid, I want to restore my system to its factory state using the recovery partition or recovery media created by me, using backup and restore of lenovo.

    1. What is the status of my windows?

    1 b. Will he ask again the activation key?

    2. as I have downgrade rights to windows 8 pro, it is said that the product key is built-in on the motherboard. now when I used another key to activate the windows, what the key embedded on the motherboard.

    3. What is the best possible solution to this question, while I keep the original oem windows?

    is not - and never has been - responsibility of MS to pre-installed Windows help, a large part of the price of Windows is the support costs. Manufacturer have always had the responsibility to provide software support for the warranty period. Most interprets this as giving instructions on how to use the recovery media :(

    Yes, by using the recovery media should give your system its true status.  It will delete all data and programs, so go back to external media first!

  • In what order Ironport checks incoming mails / outgoing

    Hi guys,.

    I can't find any document about this one. In what order does Ironport checks / analyze / check incoming emails?

    Considoring Ironport has these controls enabled on a mail policy;

    1 anti-Spam

    2 anti-virus

    3 HAT and RAT

    4 Senderbase reputation score

    5 outbreak of filters

    6. content filters

    7 SPF

    and

    8 anti Maleware protection and file analysis.

    Why would I ask you this because someone asked me why the emails were blocked by anti-spam instead of SPF. And is it possible to block incoming emails spoofed by "own domain name but different IP address" from the outside by SPF instead of other policies? Or is it because the Ironport shall follow the order?

    Is there one better way other than creating a new policy - content SPF above default to achieve policy filters? Because I'm afraid if I create a new policy specifically for SPF above default policy and when a mail to has an SPF record checked but a virus then default policy does not have a second control and the e-mail will be sent. Am I wrong?

    Thank you all in advance

    Hello

    The pipeline of e-mail flow is explained in detail in the final user's guide Chapter 4

    http://www.Cisco.com/c/dam/en/us/TD/docs/security/ESA/esa9-7/ESA_9-7_Use...

    In short the email circulation in the appliance as below

    .
    Email-> SBR-> HAT-> SPF/DKIM / DMARC-> RAT->-> anti - Spam-anti-virus-> WAP-> content-> outbreak Filters > filters, Message filters

    Please check SPF note is performed early in the pipeline, but a decision will be made only based on message/content filters created for the SPF verdict.

    An email would be analyzed by all engines except where a final decision (such as bounce, drop) is encountered. Put in quarantine is not a final act and an email would be sent only to quarantine at the end of the line of treatment after that scanning everything is finished. This is why an email with the action of the SPF filter quarantine could again until the end of the spam quarantine based on anti-spam verdict.

    You will need to determine what analysis you want to perform and to be bypassed for those emails and make changes accordingly.

    Thank you
    Libin venet

  • I bought a paid subscription of 12 months but I am outside the United States, I can't activate it. What can I do to activate it?

    I bought a paid subscription of 12 months but I am outside the United States, I can't activate it. What can I do to activate it?

    What it/where you buy should match your country of registration

    If you bought something on a US site, I don't think that you will be able to activate it outside the United States

    But, since this is an open forum, not Adobe support... you must contact Adobe personnel to help

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • Close the SRM devices - in what order?

    I have SRM running on Windows 2008 R2 with Server devices Microsoft SQL, VRMS, VR and vcenter.   In what order I stop these?   The last time I tried, I just broke.

    As the poster says that you must think about dependencies,

    every thing has a dependency on SQL so that it must be stopped, then, everything has a dendancy on vCenter. then virtual replication must vCenter and VRMS VR finally SRM needs vCenter and VR for replication of data store.

    If the logical order for SRM - VRM - VR - vCenter - SQL farm (would a separate SQL database and instances)

    to make appear the opposite is true, SQL - vCenter - VR - VRM - SRM

  • 3 subsubscriptions the same ID; Anyway is used to see what order number where?

    I have 3 Subsubscriptions all under the same ID, but one user is receive messages that they are already in use by 3 other computers are at - it a way to tell what order number is used on each computer?

    Someone may be along to correct me, but my belief is that for subscriptions retail (the regular kind), you can have only one subscription, that counts and it can only be used on TWO computers per ONE person. If you want as many people to use it, they each need an Adobe ID and subscription. If a person wishes to use it on three computers they need two Adobe ID.  For businesses, the volume licensing work differently.

  • What order to install various parts of different versions of CSs?

    I have:

    First Adobe CS3 Pro

    Adobe CS4 Web Premium

    Photoshop CS5

    InDesign CS5

    5 Lightroom

    What order/sequence should I install in?

    In the upgrade to the Mavericks of OSX, I formatted my hard drive and do a clean install of everything. I had tons of problems in the past with different versions of CSs. I'm currently minimise problems trying to not have first, and the installation sequence seems to be the first place to start.

    My notes 3 years ago:

    The file pcd.db that the Adobe guy had me move (on 12/19/10) had to be put back. They could not give me a reason why he had me remove this file. The only file that needed to be replaced was cache.db.

    Transaction #: 307-588-034

    And before that:

    I installed CS4 CS3 on top. None of the existing applications have been improved, or CS4 applications installed in parallel. The answer, not included in the read me instructions installation, is to uninstall CS3 and CS4 to reinstall. [But that didn't work.] I does everything first install Adobe CS3 Web Premium and first Pro CS3 is not part of Adobe CS4 Web Premium, so I hope for no problem there.

    Why my most expensive software is also most of the dispute?

    John.Brennan wrote:

    I have:

    First Adobe CS3 Pro

    Adobe CS4 Web Premium

    Photoshop CS5

    InDesign CS5

    5 Lightroom

    What order/sequence should I install in?

    Don't think it matters too much, but probably the order you listed in.

    Out of curiosity, have you bought them all individually? that is the version of Photoshop CS5 and Indesign CS5 full after buying CS4 Web Premium?

  • In what order to read the Documentation for Oracle human resources

    Dear gurus,

    Please advice what order read oracle resources human R12 Documentations for example I should read first implemented or the guide first? in the same way on other documents


    Concerning

    Muhammad Noman moomo

    Hi Muhammad,

    MFC itself is very broad.
    If you want to know what all is covered in HRMS go over-
    http://docs.Oracle.com/CD/E18727_01/doc.121/e13511/T6652T6654.htm

    Then, based on what you want the subzone to learn, through-
    http://docs.Oracle.com/CD/E18727_01/NAV/HRM.htm

    In addition, there is a lot of information online-
    http://apps2fusion.com/apps/Oracle-HRMS

    See you soon,.
    VB

  • what order of a transition means in a process flow.

    what order of a transition means in a process flow.
    I have seen a few cases where two outbound unconditional transitions from same source have different order.
    What is the difference between the order of 0,1,2.

    Kind regards
    RD_RBS

    The processing order determines the order in which the transitions are evaluated. The first transition consistent with his condition is one that is followed.
    for example
    transition 0 = x > 100
    transition 1 = x > 10
    transition 2 = x > 1

    If x = 20, and then transition 1 will be used. If the incorrect order is specified in this example, then the bad transition will be used in the stream.

    for example
    transition 0 = x > 1
    transition 1 = x > 10
    transition 2 = x > 100

    with x = 20, this will follow transition 0, which is probably not the desired action.

    Regarding the unconditional transitions, I expect that the one with the higher order of the transition will never follow, and so design flow is probably incorrect.

    Nigel.

  • Should what order I install the drivers on a Satellite A40-892

    My son-in-law has lost the recovery disks for the A40 and I then formatted the hard drive and installed Windows XP SP2. I put a call in Toshiba who advised I have download the drivers from their website () and that I'd find instructions on the order to install them. Does anyone know what is the order to install or where I can find these instructions?

    Kettleness

    Hello

    It s not so tragic, how install you them, but if you need an order how to install then it must do the following:

    Chipset utility
    Toshiba console
    Aggressive C3
    Display driver
    Audio driver
    LAN driver
    Wireless LAN driver
    PowerSaver
    Utilities

    and then the other stuff

    It's like I would :)

    Greetings

  • How to activate money plus what product key does not work

    I had to reinstall Money Plus.  I've only used this product once.  The product key will not activate.  What should I do?

    Read this: http://support.microsoft.com/kb/941425

    Alternative: http://support.microsoft.com/kb/2118008

    J W Stuart: http://www.pagestart.com

Maybe you are looking for

  • My Satellite phone shows "Spin retry count" WARNING

    Hi first time user hope to have this entry, I use system mechanic pro last version and on the status of disk monitor hard, show a warning for the number of attempts to spin. My laptop is only 2 months old should I worry? and watched it. Thanks in adv

  • Satellite U300-152: working time of battery is low

    I see that my battery life of laptop newly purchased is low.I tried to use the battery alone (not connected with sector and power adapter) and unloaded it completely until the computer went away by itself. Then I plugged the adapter for the laptop to

  • Example: Z820 Workstation: HP Z820 dilemma Workstation system BIOS version 3.88 updated

    HP drivers & software Support, URL page: http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5225043&swItemId=wk_149650_1&swEnvOid=405... it is said that the last v. updated 3.88 to Z820 BIOS will display an error message and fail to start if

  • Automatic update KB976098

    Maintains the failure to comply with this update. What can I do to stop switching?

  • Update Xperia Z1 error

    After trying to install what I thought was a software update on the Sony PC Companion 2.1 after a few failed attempts at the download my phone shut its self off and now when I turn it back on it displays a white picture and message saying "The softwa