Activate web in-application approval?

Similar Questions

• OfficeJet 6500 has more - impossible to activate Web Services

  Any help would be appriated on this: I tried Google trawling without result!

  I'm trying to enable Web services on my printer to use apps, ePrint Airprint, e.t.c. When I press the setup of Web Services, I agree to the terms and instantly taking me to a product update checking. The display shows then 'no product updates available for this printer' with only 'OK' button to press, when I do I picked the terms and conditions. I am stuck in a permanent loop! All other services (printing, scanning) work very well and the printer is certainly connected to the internet.

  I tried:

  -Restore default settings

  -Turn off the router and the printer.

  -Modification of the DNS settings for the printer.

  Any other suggestions - I'm getting really frustrated now so would appreciate any ideas!

  Hello

  First of all, thanks for all the help when trying to get Web services facing up and running, it is appreciated. I tried partial reset without success, then decided to have another look at the firmware.

  It turns out that I had an older version of the firmware, but I couldn't access the Web services to upgrade, and when I tried to do it via the USB port, he told me that the new firmware will not apply. After a little searching around, I found this thread:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/can-t-upgrade-firmware-OfficeJet-6500a-plus/TD-p/874523/page/4

  After a bit of change the .ini settings, I managed to upgrade and, after a week of trying, finally managed to activate Web services! I can now access all the applications and use AirPrint, which is what I had originally set out to do!

  There is a big problem with the firmware of this particular printer as a lot of people have commented on the difficulty and had to basically 'hack' the firmware update to make it work. It is pretty poor on behalf of HP, as of course has been a recurring problem for some time. However, your help has been fantastic and despite considering myself to be pretty computer, I am kicking some of the stupid mistakes I did!

  In any case, Bravo to you and thank you for your help!

• How can I remove an application approved iPhone for children

  Is there a way to remove an application approved iPhone for children so that they can not download it again?

  Settings > general > Restrictions.

  You can stop all downloads here, or restrict this an app, but there must be on the device to hide.

• M176n MFP: MFP M176n will not activate Web Services

  I bought two MFP176n and tried to activate Web Services to print remotely. It does not work. The computer, I have access to the Services Web page on the unit IP address and use the button 'enable '. It run and run, but nothing happens. I see by a few points running on the screen on the printer. They're going to infinity.

  As part of attempts, I've updated the firmware of the device - it's now at 20150228. This has not changed the behavior anyway.

  BTW, I also tried DNS manuals with addresses 8.8.8.8 and 8.8.4.4 as suggested in a previous post. No change.

  EPrint from mobile devices (Android and Ipad) worked on the first day, but only when she is on the LAN...

  Hello @andershl,

  Welcome to the HP support forums.

  I understand that your M176n will not allow Web Services.

  I would like to help.

  Personally, I found that the Google DNS works best with inkjet printers.

  For LaserJet, I use DNS of Level3 address.

  Primary: 209.244.0.3

  Secondary: 209.244.0.4

  If Web Services are still not allowing, turn the printer off and disconnect the power supply to the router for about a minute.

  Plug everything back in and turn the printer.

  When the network has emerged again, try to enable Web Services.

• Satellite L650 (PSK1JA-07C017) - Web cam application does not work

  I have a client who owns the computer above and while I was there yesterday, she mentioned that the web cam is not working. I clicked on the icon and received a popup saying to upgrade or complete installation and after doing this the application still not open. I went to the support downloads section and got the enumerated here uninstalled web cam application the application of the computer.

  I re-installed with the application that I had downloaded ut that did not help. The same behavior was exposed. I googled a little and I saw many enties from others so I came here to have this problem, but no solutions.
  Any help would be appreciated.

  Sq

  > A full installation of operating system due to a failure of the application and judging by the results of google search a known issue that should have a fix now.

  This could be a software problem I mean it is possible that the system could be confused to you that it is not impossible? In my short life, I noticed several times this dirty registry may cause issues such as

  > I have installed with the application that I had downloaded ut that didn't help
  Well, maybe you should try to clean the registry using some tools such as CCleaner for example before you install the driver if this is not enough, then I would try to reinstall the image of Toshiba

• Uninstalled Toshiba Web camera application by any chance?

  I use a laptop Toshiba Satellite windows 8, my built in camera has been bad for a while, I fixed it recently and it is broken once again, during the audit, in the Control Panel, he said I need to 'Change' the Toshiba web camera application, I continued and he completely uninstalled the application from my computer I am able to download the app to a legitimate website? If so, how?  Thank you!

  I use a laptop Toshiba Satellite windows 8, my built in camera has been bad for a while, I fixed it recently and it is broken once again, during the audit, in the Control Panel, he said I need to 'Change' the Toshiba web camera application, I continued and he completely uninstalled the application from my computer I am able to download the app to a legitimate website? If so, how?  Thank you!

  Hello

  Your best resource is Toshiba Support.

  You must ask this question on the Forums from the Toshiba Support. Toshiba experts will be able to help.

  Toshiba support - home page:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=product

  You can also post this question on the forums of user Toshiba.

  Toshiba Support Forums:

  http://forums.Toshiba.com/

  Concerning

• Java Web Start application runs under jre8u40 but not jre8u51

  We have a Java web application that uses javaws. It runs very well under the update of Java 8 40, but under the update Java 8 51 jp2launcher.exe stops right, without launching the application.

  • I found the papers in C:\Users\me\AppData\LocalLow\Sun\Java\Deployment\log, but they are identical between j8u40 and j8u51 (except of course for the order of pots are loaded, the version of jre and the start time).
  • I connected the launch using Process Monitor for the two versions of jre. Under j8u51, jp2launcher.exe ends with just the result of 'SUCCESS' Comparing the two newspapers procmon, I can't choose anything unusual. They have both search in the directory C:\Users\me\AppData\LocalLow\Sun\Java\Deployment and their respective C:\Program Files\Java\jre1.8.0_XX\lib directories and others like, but then the j8u51 there is only.
  • The Windows event logs show any what that touch of Java.
  • I managed to run the jnlp whose value "JAVAWS_VM_ARGS = - Xcheck:jni - XX: - TraceClassLoadingPreorder - XX: + PrintCommandLineFlags-verbose: jni-verbose: class - verbose: gc - XX: + PrintGCDetails-Djava.util.logging.config.file=C:\misc\logging.properties" and connect the stdout/stderr. It looks like an end to newspapers javaws and jp2launcher for versions of the output, then both jre8u40 and jre8u51. Probably in the j8u40 version it launches another jp2launcher.exe to run the application.
    • Comparing newspapers two output gives nothing interesting. Classes are loaded in almost the same order, for the most part identical classes other than the few differences that are explained easily by just be more up-to-date used classes.
  • Finally, I was able to launch the application directly, using java.exe, by getting the customer their unpacking and installing the server files. The application itself works fine in jre8u51, so the problem is definitely javaws himself.

  I find very little documentation on the inner workings of Java Web Start and no documentation at all on jp2launcher.exe. Can anyone suggest what could go wrong here, or other diagnostic measures I can take?

  e: sorry for the strange user name. I tried to change it in my profile, but the forums don't seem to accept the change.

  Hi people.

  I managed to find the solution. There are several factors that interact and I think one of them is a bug in Java Web Start.

  Please see full report at http://stackoverflow.com/questions/31556273/java-web-start-application-runs-under-jre8u40-but-not-jre8u51

• I have a license for Design CS6 and Suite Web and applications downloaded, but they do not load or ask for activation. [was: question]

  I have a license for Design CS6 and Suite Web and applications downloaded, but they do not load or ask for activation. What should I do?

  It's a Mac and finally got to window that let me enter the license key and it works. I thank you for your response and departure to help!

• What that means, "Web service is disabled. An administrator can activate using the application server? »

  I am trying to connect to a Web site that I am using for 5 years and more. Now Firefox reports that the certificate is incorrect, and the message "Web service is disabled. An administrator can activate with the server application. ", is given.

  I don't know what to do with this information. Service Web is on other Web sites. What is the "server application? How to take control and connect? I am the administrator.

  Are you able to reproduce this problem with another browser?

• Web camera application error message

  Hello

  I get the following message when I try to run my Satellite L655 laptop webcam application:

  "The application failed to start because its side-by-side configuration is incorrect. See the application event log, or continue the tool command line sxtrace.exe for more details"

  No idea on how to solve this problem, because I was not able to have the menu bar of the web camera (for more than two months now) and I wasn't able to use it on the GMAIL chat since last night (it works well in Skype).

  P.S. I'm not a tech pro!

  Hello Jarnk

  Have you tried to reinstall the webcam app?

  Remove it system (Control Panel > programs and features), restart your computer and install the latest version you can download from the Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Accommodation requirements and possibilities of the Web UI applications

  Hello

  I'm always evaluate LabVIEW Web UI and I have not yet built/deployed any application.

  But it is possible to deploy my Web applications user interface for cloud storage OR use as a host?

  In addition, it must be installed on the host of the LabVIEW application?

  Finally, it is necessary for the client to be on the same network of the host application?

  Thank you

  Marcelo

  Hi gracietti,

  your answers:

  But it is possible to deploy my Web applications user interface for cloud storage OR use as a host?

  No, it isn't. To build or deploy your application, you must have a Web UI Builder labVIEW development license.

  In addition, it must be installed on the host of the LabVIEW application?

  It is necessary to install the Microsoft Silverlight plugin browser to view and access the creator of user Web LabVIEW interface

  Finally, it is necessary for the client to be on the same network of the host application?

  No, it isn't. You can access the application from another network, but you need to use port forwarding. More information: http://digital.ni.com/public.nsf/allkb/FE64994F19D12273862579AB008001D1?OpenDocument

  I hope this helps us.

  Kind regards

• HP Officejet 7500 E910 deletion of the web registration application

  I bought my HP Officejet 7500 E910in 2013 and have registered the product via the web application for registration that appeared on my desk.

  Despite this, the recording web application still appears after that, I was working for a while and the only way to close it is via the Task Manager.  Annoying as it is, it's more disruptive when using a powerpoint slide show, as the web application closes the powerpoint program.

  I would like advice on removing the record of web application from my laptop.

  Welcome to the Chris forums

  I understand that you want to remove the "web app registration" of your computer. Try looking in your control panel, add/remove programs or uninstall a program and find the app in there and uninstall it. Who should remove it completely. Then restart the computer.

  If you are still having the pop up happen, let me know what version of Windows you have:

  Operating system Windows am I running?

  Thank you

• Download web site application

  Hey all, I finished my application and I need to upload it to a web site that allow the user to download and install it on the device, how do I do that in details please, thnx in advance

  What is a better link?

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/how-to-deploy-and-distribute-Applicati...

• What is the best Id for Web BlackBerry application development.

  I use Netbeans to the webDevelopment but I give a lot of problems during the deployment of the Application.
  Could someone help me?

  Use dreamweaver, its afully integrated IDE for web development. Its very easy to use.

• How to get out of my web browser application but beginning

  Hi all, I have a code that allows me to t odetect if a new version of my application is

  available, and I want to show a dialog if it is giving the user the ability to update/upgrade

  If they responde Yes. So I'm thinking something like what I have below might work, but its broke. :-(

  Object versionFromDb = Db.getVersion();
  
  String versionFromDescriptor =         ApplicationDescriptor.currentApplicationDescriptor().getVersion();
  
  if ((versionFromSecurityData != null) &&
      !versionFromSecurityData.equals(versionFromDescriptor))
  {
     String expandedText = "New Version Available. Do you want to exit and install?";
     int ret = Dialog.ask(Dialog.D_YES_NO,
                          msg,Dialog.NO);
  
     if(ret==Dialog.YES)
     {
       super.close(); // close main application
  
       // Get the default session
       BrowserSession browserSession = Browser.getDefaultSession();
       // now launch the URL
       browserSession.displayPage(http://www.myserver.com/myapp.jad);
  

       System.exit(0);
      }
  }
  

  I tried the command of part of the foregoing (0 and output (0, but maybe I'm not on this right, of course if I remove the super.close () and the System.exti (0), the browser burst, but I want nearby))

  for auto output and have the web browser remains open and headed to the new version.

  is it possible, or I'm going about this all wrong?

  Thank you rim

  When you call super.close (), and the display battery is empty after closing the window, System.exit (0) is called automatically. Close() returns never so, your browser code never runs.

  Get rid of the call to close() or move it to where you call System.exit (0) and get rid of the latter.