Post updated to SP3 and IE 8, some systems cannot connect to the local network

Similar Questions

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

  I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

  Deactivation and reactivation of these two connections: FAIL.

  "Diagnose and repair" on the two connections: FAIL.

  Under dynamic I.P. type to static/static to the dynamic: FAIL.

  Uninstalled all network via Device Manager devices, then restart: FAIL.

  Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

  The command ipconfig/all text follows:

  ----------------------------------------------
  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Brooklyn's>ipconfig/all

  Windows IP configuration

  Name of the host...: Brooklyns-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-21-5C-31-87-95
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-4E-2E-F7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
  B4B}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
  0FA}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Brooklyn's >
  --------------------------------------------------

  Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

  I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me? CC = en

  I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me?

  Here is the link to the LAN of your system drivers:

  http://ftp.HP.com/pub/softlib/Software7/COL15134/ob-40490-1/sp26744.exe

• Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

  a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

  Hi Abhay,

  I suggest disable you the password protected sharing and check if it helps.

  Networking of computers running different versions of Windows

  Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

• I had Acrobat Pro 8.3 for awhile. It is a registered product. However, as I updated to Windows 10, repeat me that it cannot connect to the internet to register or update the product

  I had Acrobat Pro 8.3 for awhile. It is a registered product. However, given that I have updated to Windows 10, he repeats that it cannot connect to the internet to register or update the product. I am connected to the Internet. What should I do?

  Thank you

  Reinstallation of my original DVD has solved the problem.

  Charlie

• Some programs cannot connect to the internet on Windows Vista?

  I'm unable to connect to the internet, such as Internet Explorer, programs/games programs that use a program that download in the same way to torrents, almost everything that is to connect to the internet for more information. The only programs that can access the internet are Firefox and a few games I downloaded before this problem occurred. I tried to disable the Windows Firewall, leaving the programs through Windows Firewall, but still nothing.

  You use Norton or McAfee - Script disable blocking if you can.  If this is not the case, try to uninstall the application and start the game again.

  Perform a clean boot

  http://support.Microsoft.com/kb/929135

  Parameters of the control Port.  You may need to open a port.

  This could also be the cause by using a proxy server for your connection through.
   https://KB.Perforce.com/Article/905/common-Windows-Server-network-errors

• Unable to connect to the local network and internet

  VMware PlAYER 3.1.2

  The host is Windows 7 Ultimate x 64

  I created a few virtual machines, but none of them can connent to the LAN or internet.

  What Miss me?

  Thank you!

  Joeq wrote:

  I'm not sure about the difference between bridged and NAT.

  Network Address Translation (NAT) sharing the IP address of the host and is the default type of the network card.  Bridged connects directly to the physical network.

  Changed the default value under settings of Virtual Machines?

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• Smartphones blackBerry "BOLD" BDM V4.6, WINDOWS VISTA AND CONNECTION to the local network AND SCHEDULE

  THE BDM CONTINUES ON THE FENCE WITHOUT SPECIFIC ERROR. Windows closes the application in the middle of sync if I'm not here to keep the computer crashes due to no use. Who created duplication in Schedule BB of almost all my appointments, but has not corrupted the file Outlook 2007 (which I have another perfect copy). Also, I removed the modem added with the BB because it created a conflict (I think). So, questions:

  (1) how can I empty the calendar with the BB (remove all entries)

  (2) having someone has seen this before?

  (3) should I do something else or reinstall something in order to solve the problems?

  TKS,

  PvM

  Hello

  You probably have a damaged in the BB calendar, fairly common entrance with the BB and Outlook:

  Generally, I put the synchronization to make me accept rejection conflicts and adds and deletes. In this way you

  You can keep this case to go away.

  Here is the schedule wipe:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04950&sliceId=SAL_Pub...

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• Windows xp connected by connection to the local network at 100 Mbps and yet still get ccontinuosly disconnected servers of games... suggestions?

  See above

  This can happen if the servers are overloaded / can not handle the number of people on it

  It's on your network 100 Mbit/s does not mean that that's what you're connected to the Internet.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• com Android.Phone pop-up box message - Moto G 3rd Gen cannot connect to the network and overheating

  "Unfortunately, the process com.android.phone has stopped" this pop-up box keeps appearing, over and over again.

  This error appeared out of no - where, and we have been unable to connect to the phone network since. The phone is also overheat insofar as we could hardly touch the screen once the phone was in a pocket.

  The newtowrk provider has never heard of this error, so I guess it's a thing of the bike.

  Please tell us how to solve this problem.

  Becks_Phone wrote:
  Thank you! I am now in safe mode. Being illiterate, technology that do I then please?

  If the phone works very well in mode without failure, then probably some 3rd party app is the problem. The challenge is to find what app or apps is the problem.

  Mode sometimes course does not help, and a reset is the next step only. Other times in safe mode simply confirms that the phone is physically ok, but there is not point to the actual problem.

  Safe mode is designed to allow the phone to start without any 3rd party of loading applications (not always, but that's the idea) but some configuration parameters can still load, it is not infallible. But it is sometimes useful exclude a hardware problem on the phone.

• Windows wants to renew the IP address for the local network 2 to repair but cannot and says: network support contacts Manager. Don't know what to do

  Recently went to microcenter and added 2 GB memory and ethernet for cable service connection to the computer. Perhaps this new connection is LAN 2...

  Please elaborate on what has been done to add "an Ethernet for cable service."

  Please describe the physical connections from your computer to the Internet (i.e. where make the thread go?).

  What version of Windows you have, including the service pack (right click on desktop and select Properties, if you do not know)?

  Open network connections (start > run > ncpa.cpl > OK).
  What icons are listed?
  Click on each connection to the Local network and review the blue column on the left side of the window, at the bottom under the heading.  Please provide the information displayed (unfortunately, it cannot be copied, so you do not have to re - type).