activation of the operating system

Similar Questions

• Activation of the operating system failure:

  Re-loaded OS (Vista Home typo) of re-covery disk to new HD product code back embedded code invalid, I tried to tag on computer and stops 1/2 way through entering with "Invailed characuter.

  0xC004F050 usually means that you have misinterpreted a character - C/G/6 or B/8 or Y/V are the most common.

  Please note that the following characters cannot be used - A E I L N O S U Z 1 0 - so don't bother trying unless you like noise it does :)

  an O/0 is almost always a Q

• I changed the hard drive and was invited to provide an activation code in order to achieve the functioning of the operating system

  I had problems with my PC which is an old, 2003 E - business machines, I changed the hard drive and was invited to provide an activation code in order to achieve the functioning of the operating system, it is the third time that I had to do it in 2 years, a message came back to me that I could use this activation key which is Microsoft XP Home Edition... any suggestions I'm a student who can't afford to keep buying these keys to get my PC running, I have homework to fill out online... Please help

  Use telephone activation, say nothing, and you will possibly connected to a human being.  They should be able to sort out you.

• Possible to downgrade the operating system?

  Hello experts,

  My Macbook is a 13 "early 2009 (Core 2 Duo 2.0). I have 6 GB of RAM (recently installed the last 2 GB).  Currently, the operating system is OS X 10.11.3.  I think that since this OS has been installed (a few months ago) the machine has slowed down considerably.  "Outputs page" is almost always up.  I re - often starts to get "page outs" to reset, but they will soon get back to the top.  Almost any process bothers me a lot of activity "beachball".  My main use for this computer uses iPhoto to show slide shows to various groups (I have not found that the Photos should be for various reasons).

  I know that this is considered a 'old' machine, but since it is my secondary computer I would not spend the money on a complete replacement.  Is it possible to go back to an earlier version of Mac OS X? That could accelerate or put less strain on, this Macbook?  If I could go back to 10.10 or 10.9 How would I do it?

  Thank you

  JimH

  Your computer will be not a faster were no you downgrade OS X. There's nothing wrong with El Capitan. Page Outs increase because you don't have enough RAM and try to run too many processes simultaneously.

  If you want to demote to an increase in performance, and then wipe the drive and install Snow Leopard.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• 11 - k000na: problem of restart of the operating system after disk erasing

  Hi there are members of the HP support forum!

  I bought my product, the HP Pavillion 11-k000na, in October of last year and around in time to March this year, I found the speed of the computer to be really bad, so I decided that I do a disk cleanup and restore the computer to factory settings I've done. Restart the computer, I discovered that something has gone wrong and after many failed attempts I could not restart the operating system.

  Time and time again, the laptop gives me the same error - message

  Error code 0 xC0000001

  When I bought the computer it came installed with windows 8 and I've quickly updated to windows 10, would be the problem that when I restored it to factory settings, it does not know how to restart now?

  Any help would be really useful thanks!

  Oliver

  Hello

  On the upgrade of Windows 8 to 10, built in recovery partition got corrupted and will stop running more.

  How do you reset phone?

  Only I know is to order for your model of HP USB recovery. Or pure 8.1 Windows update install using Windows Media creation tool. Both methods retrieve product key of activation of the Board BIOS chip, automatically and be activated.

  Concerning

  Visruth

• If I kill Winlogon.exe in an attempt to restart or stop a device could cause corupted becaome the operating system

  I was told that if I had to kill the Winlogon.exe in an attempt to restart or stop a device could cause the operating system to become corupted.

  I'm uaing a feature of windows 2000.

  Hello

  1. How did you kill? via the Task Manager?
  2. do you use the Windows 2000 operating system?

  The process "winlogon.exe" runs in the background. Winlogon is a part of the Windows login subsystem and is necessary for the user authorization and activation of Windows controls.

  Murder winlogon.exe can make your computer unable to open a session, but I doubt it would have damaged the operating system. It is necessary that you let Microsoft Programs and services run without interruption for the proper functioning of your computer.

  Note: The winlogon.exe file is located in the folder C:\Windows\System32. In other cases, winlogon.exe is a virus, spyware, Trojan or worm.

• How to restore my system when I bought it? Did not the disks in the operating system when the computer was purchased.

  Original title: System Restore

  How to restore my system when I bought it? No disk when I got it.

  I can not open a new document in works 9 says file is missing? System Restore has new date

  I want to go further? is there a way? Windows Vista home Premium SP2

  Hello

  System Restore puts your computer's settings to a date earlied.

  You mean that recovery of the system.

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled.

  I have problems activating windows x 64 bits.

  I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled. Recently, I updated my motherboard and changed to a quad core. I would appreciate help from the administrator. Legitimately, I bought my version of Vista x 64 tiger direct for years and relied on it as my OS for a while now. Any live medium or other assistance, advice, etc., would be appreciated. This operating system has been reinstalled several times, and the last time I had to reinstall it is because I closed windows because he wasn't updated correctly, and then restarting the operating system has not yet worked so I HAD to reinstall. Now windows says that my code is already used. I'm ready to take pictures, show my keycode and do anything to get my system online. Vista is saying I need to activate within 3 days. Also, I have problems installing Service Pack 1. Which maybe has something to do with my questions? Please, someone help me!

  Mark,

  In this case, you will need to contact Microsoft by phone for your landline number. Usually, most product keys have some time, they can be turned on before you reach this State.

  Best,

• I installed the operating system, but there is no Microsoft Office Applications, where can I find them?

  Original title: failed to get the office programs to activate

  Since I bought my computer, I got four new hardrives and a new motherboard installed. When I downloaded the OS disk, he did not request the activation code, so I can not find my office programs I really need. Any help would be apprecciated.

  Hello
   
  
  Microsoft Office applications are not included in the DVD of the operating system. You must install it separately. You can contact Microsoft Customer support to buy the same.
   
  See the link below which will help you achieve Microsoft technical support where you can find purchasing information in your area.
  http://support.Microsoft.com/kb/295539
   
   
  Hope this helps

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• replace the operating system after replacing death HD

  Pavilion dv7-4285.  I replace a hard disk totally dead! How can I get (free, cheap oe) replacement for operating system. I did not receive the disks of software of the retailer.

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K

• How can I reinstall the operating system on a new hard drive?

  I strongly suspect failure of hard drive on my old computer XPS 420. Data recovery isn't a problem. However, because the way I too lazy to buy a whole new operating system, is possible that I can transfer the installation of Windows Vista on a new hard drive? I told me that Dell will send me an installation disc to do, but how to make a record like this, and is there another way?

  I'm thinking of ghosting the HDD on another and the use of the recovery for nuke partition in a new facility, but it would even work?

  Thank you

  SnarfTCat

  The simplest method, I prefer to install a replacement hard drive, is to clone the existing hard drive to the new, that will also transfer all applications and programs.

  You need an imaging utility, similar to True Image Home 2015.

  http://www.Acronis.com/homecomputing/products/TrueImage

  Acronis resize partitions transferred to match the size of the new hard drive.

  Hard drive manufacturers, also have their own free cloning software available, but it can be used only with their hard drives.
  
  First, install the new drive as the secondary and the image of the main hard drive in it.

  Immediately after the cloning, shut down the system, switch the data cable [SATA port 0] to the new disk, making the new master hard drive and see if the system boots properly.

  Start the system with only the new hard drive connected.

  Be sure to leave the original drive disconnected, until the new hard drive is working to your satisfaction.

  Before cloning a hard drive, make sure that the existing drive has no corruption or virus on it, because they will be transferred to the new hard drive.

  It will take a second SATA data cable, there should be a spare connector to SATA power inside the housing.

  What is obtaining a disc from the Dell operating system Vista OEM [If Dell still copies of this available media], but you can be out of luck unless you have a warranty from Dell, but it's worth a try to see what is happening.

  If you reside in the United States, or the Canada and are the registered owner of the computer, with an active warranty, a disk that contains the operating system specific to your system factory installed can be requested HERE.

  Note: Dell may impose a charge for the disc.

  If you do not live in the United States, contact the Support from Dell, which is located in your country.

  Bev.

• Can I use a legitimate DVD Win7 product key to activate the operating system already installed?

  I used a DVD Windows 7 Home Premium I bought from Amazon to install on 2 computers, THEN discovered the 2nd computer would not accept the product key.  I don't want to reinstall the OS and I can't seem to find a place online legitimately sell just a product key, so if I buy another DVD on Amazon, the product key that comes with it will allow the existing installation to activate, or do I have to spend a day or more to reload the operating system, drivers, programs, settings etc, just to stinking activation?

  This information is partially incorrect. OEM System Builder licenses come with a product key.

  Yes, it does not require a clean install, but because you already have Windows 7 Home Premium installed to use your retail disk, all you have to do is to change the product key, no installation required.

• How do I upgrade to Windows 7 Pro without reinstalling the operating system?

  I have a client who is moving from a workgroup to a domain based network.  About half of the computers are Windows 7 Home edition.  I need to upgrade to Pro so I can join the domain.  I was not able to find an easy way to do it since Anytime Upgrade no longer works on Windows 7.  The only time I did, I had to by a free license key and ended up having to completely reinstall the operating system.  So, how can I switch to Win 7 Pro without reinstallation of the operating system or go to Windows 8.

  Unfortunately, your only option now would be to buy a full version or upgrade to Windows 7 professional retail license and use the product key with the Express Windows 7 Home Premium Upgrade Wizard. It is, it's expensive:

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I want to activate the operating system 64-bit on a new construction

  I activated the operating system 32-bit on my laptop.  My laptop is dead.   I want to activate the operating system 64-bit on new construction.  I've never used the operating system 64-bit before.

  Original title: new generation system in a few days

  As long as it is the key to detail (store bought) that was used to activate the license on your laptop, you can transfer to a new machine and reactivate over the telephone.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  64 bit 32 vs

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Windows 7 64 bit comes in handy when you need to deal with at least 4 GB of RAM or more. Windows 7 32 bit can use up to 3.2 GB of RAM. Because the address space of memory is much larger for 64-bit Windows, this means that you need two times more memory than the 32-bit Windows to accomplish some of the same task, but you are able to do much more, you can have more apps open, do things like run a virus scan in the background it will affect the performance of your system. 64-bit Windows 7 is safer too, malicious code cannot easily infiltrate it, drivers are more reliable because they must be signed before it can work with 64 bit Windows 7.

  Regarding compatibility, you need device drivers 64-bit hardware devices, you may have. In addition, there is no 16-bit subsystem in Windows 7 64-bit, which means, your applications must be 32-bit only, not 16-bit Installer or programs uninstaller. Also, if you decide to switch to Windows 7 64 bit in the future, there is no way to upgrade from 32-bit Windows, clean install only.