Activation problem with new hard drive on another computer.

Similar Questions

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• A problem with the hard drive of your computer

  Windows is not able to open a file on the hard drive of your computer. This could be a temporary condition that may disappear after you restart your computer, or it could be a more serious problem with your drive hard or its driver. I tried to restart my computer, I ran the hard drive error checking, nothing seems to help. Please advise?

  Hello

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.

• Problem with the hard drive on the computer.

  Hello

  my hard drive is 500 GB, but my hard drives are less than 100 GB

  I want to increase my hard drives storage

  So, what should I do?

  One who partitioned the drive had little idea about what they were doing.

  You have a spare TWO HUNDRED eighty THREE GB unallocated at the end of the training. This is the rest of the space.

  Use a partition manager to absorb space unallocated in the existing partitions.

  Aomei is as good as no matter what...

  http://www.aomeitech.com/aomei-partition-Assistant.html

  Merge unallocated with E drive space by selecting resize them...

  Then resize D space e administration until E is that it is currently...

  Then resize C until the D is about the same size as e...

  The above will take time to complete, and you should make a backup of all data before you begin...

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• I removed my xp hard drive to another computer and now it says I need to 'enable '.

  http://support.Microsoft.com/kb/950929/en-us

  I removed my xp hard drive to another computer and now it says that I have to 'activate' and when I try, I get a weird response and they all but hang up on me.  I used this drive for many years, even the screen shows a picture of my table with flowers in a vase.  What is going on?  How can I get this problem?

  Your hard drive, installed on a computer with Windows XP was preinstalled by the computer manufacturer? If this is the case, then you have a "OEM version" of Windows which is linked to the computer first it is installed on and cannot be moved or reinstalled on another computer.

  If however you have a "Commercial" of XP version that you bought in a store, then you should be able to activate by phone, be aware that move the drive from one computer to another is more often go to work and XP may have problems (device drivers and other issues). The best solution is a clean installation (after you back up your data files).

  ==============================================

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• my laptop is dying, I can move my hard drive to another computer and still use vista coa?

  my laptop is dying, I can move my hard drive to another computer and still use vista coa?

  Hello

  It depends on the type of license you have, as to whether you can transfer it or not.

  Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.

  OEM licenses are not transferable.

  If you have purchased your own license for sale retail of Windows and installed yourself, yes you can transfer it to another computer.

  Retail licenses are transferable.

  Just be sure that you have only installed on one machine at a time.

  A single license means one Installation.

  And if it is retail and transfer you, in all likelihood will have to reinstall the operating system, as this disc hard the 'old' aura card mother drivers installed, which will cause starting problems.

  See you soon.

• new hard drive for laptop computer tried to install windows XP

  Just fitted new hard drive for laptop computer tried to install windows XP, continues by saying can not find any hard disk. any help would be appreciated

  Hi JohnJelf,

  ·         What is the brand and model of the laptop?

  ·         What is the full error message?

  ·         The new hard drive detected in BIOS?

  I suggest you to contact the manufacturer of the laptop computer for more help and information.

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Qosmio X 500-warranty with new HARD drive?

  I purchased a Qosmio X 500 last month (warranty: 1 year)

  If I change my hard disk and install my own Windows 7 on it, I lost my Toshiba 1 year warranty?

  Thank you!

  Hey,.

  Don t be to worry about this! You will not lose warranty if swap you the HARD drive and install another operating system. These easy updates as HARD or RAM drive poses no problem, but don t disassemble the whole laptop.

  By the way: If burn you the Toshiba Recovery disk, you can install the Windows 7 preinstalled on the new HARD drive too :)

• Satellite L350D-21 problems using new HARD drive recovery recovery disks

  Hello

  I have laptop SATELLITE L350D-212 with windows 7 Home premium OA.
  He started to complain that there is something wrong with the hard drive so I went and bought another hard drive of the same size.

  I created the recovery disk when the computer was purchased and have backup of all the data in an external hard drive.

  After I changed the new hard drive to the laptop and tried to boot from the recovery disc, nothing happens eventhoug I can see it seems to be all Ok with the disc.

  Any ideas on how to get to run to the new hard drive recovery?

  I have the old hard drive attached as external drive via the USB port, but cannot boot from that too. It just stops at a certain point and told to stop.

  Hello

  Usually, the recovery disk must format the new HARD drive but I recommend you to join the new HARD drive as an external device to another computer and format the new HARD drive before trying to recover the laptop.

  Once the HARD drive has been formatted, connect it to the L350D and boot from the recovery disc

  Good luck

• problems with upgrade hard drive on X200s

  Hi I'm trying to upgrade my old hard drive (SATA 200 GB at 7200 RPM) on my X200s (Windows XP - SP3, 3 GB of RAM) to a new hard drive: Seagate Momentus 750 GB

  To do this, I created 3 partitions in my new hard drive:

  1. a 400 GB partition to recreate the existing Windows system

  2. a 25 GB recovery partition, which is preventing the drive from origin of the existing partition from rescue

  3. the rest (about 325 casuals) on a FAT32 partition empty (on which I intend to install linux or freebsd later)

  Then I cloned the recovery disks and windows using Acronis and then replaced the old disk with a new one.

  Finally, I see the following error message:

  Playing a disc error has occurred

  Press Ctrl + Alt + Delete to restart

  I tried to fix the master boot record using a disk objects, but the hot spare displays the blue screen of death at half way through. Put the old drive brings the system online. New drive works as well when I put in a basket USB and find in files.

  So I would like to know if there is a way to step by step to diagnose the problem.

  Thanks in advance.

  OK, I think I thought about her. There seems to be some kind of problem of bootloader. To fix a little:

  1 make sure that you create a rescue disk before doing the clone and replace. I highly recommend the Hiren's boot disk that you can download here:

  http://www.hirensbootcd.org/download/

  2. can the amorçage using this disk. From there, I see the options - Boot Windows / XP in the main hard drive (it's the first option). When I select it, I can start fine in the cloned disk.

• How to reinstall Vista on PC Toshiba laptop with new hard drive?

  Hard drive from my Toshiba laptop of sisters died as well as its internal fan and she asked me to fix it, well I got a new hard drive and replaced the dead with a new internal fan and works perfectly fine with a Linux Live CD. However, she had previously Vista Home Premium installed on it, and there was no installation CD, just 2 recovery discs. Now, I was wondering where I could get an iso image of vista UNACTIVATED so I can use his legitimate product for her key. (I also have a week to achieve and I repair to other computers as well, which are not a problem, so time is of the essence)

  Also, I have no money and can't afford to get a Best Buy installation CD, as the operating system has already been installed on the laptop/OEM computer. If that would be legal so getting an online and burning a black CD and use it to get Vista on this new hard drive of his?

  In addition, I know how to install its drivers, and upgrade from SP1 to SP2 via Windows Update Manager, all I need is a vista installation CD Home premium to get his computer upward and execution of how she wants to.

  * original title - I need a Vista Home Premium Installation CD Unactivated *.

  Thanks for the quick response, so you're saying I haft to buy an installation CD to install legally?

  Hey mikethedj4

  None

  I never said you had to buy a dvd installation anywhere in my answer

  I said that there is no free and legal download

  read all of my answer

  I advised you to start from the 1st recovery disk and if you have any problems contact toshiba at the link I suppied you with

  or follow the rest of my advice on borrowing a microsoft dvd vista and using your product key with him

  what he may not know is that microsoft vista dvd contains all versions of vista

  This is the product key that installs the correct version of the dvd

  There are 2 microsoft dvd vista a 32-bit and one for 64-bit operating system

  most of the computers unless asked when bought normally come with the version of vista 32 bit

  Walter, the time zone traveller

• Problem with connector hard drive to spring on T43 motherboard

  My T43 (type 1875) cannot operator unless I am pressing on toward the down on the palm rest above the spring certainly drive connector.  This connector seems to be designed to move upwards & downwards on two positions.  44 pin hard drive seem to connect indirectly to the motherboard via 44 springs in this assembly.  This Assembly should be compressed manually for the system to communicate with the hard drive.

  I do not understand the physical design of this connection?  I certainly do not understand the purpose of this complicated mechanism.  It is part of the protection of the hard drive?

  To correct the problem, I see two possible solutions;  either compress the springs, then bend the stems of alignment to maintain the State of compression, which makes electrical connections or replace the motherboard.

  If someone put me on how I could fix this?

  -Michael Faklis

  Note of the moderator; email address removed before finding too much spam

  This is common with the T4x problems and those who have not been carefully reassembled since the Council can become cracked over time especially when door one-handed from a corner as a person would natrually.

  Even models 15 inches and their solid upper bezel can experiencine this issue, but the models 14 inches and the palm rest of split and are the most sensitive.

  The system works when you press the right ALT just below and to the right of the trackpad?

  If you took the palm rest off the power, then press the plug of the battery, it restores the operating system?

  If so, you may be lucky that the Council itself cannot be cracked but it could be the connectors of taking battery BIOS on the Board and in this regard a $3 repair. Cut the connector and replace with a new one or cut and reweld to ensure that the circuit is solid.

  If it is cracked, you can hold with some high quality neoprene since used neoprene "shrink as styrofoam when exposed to heat and pressure. Shim planks will run, but the added stress of ttignehtning it back together can create other pauses as you are bowing the bridge so that the stress has to go somewhere.

  In addition, the system will work better if it remains stationery for a portable shim will pass when the goods are shipped under nomral conditons.

  Finally, the entire system will be brick and you can save or part the rest of it.