ActiveX controls disappear when VI is loaded in a subgroup of experts with the use of the modal to start dialog box
Hello
I have a secondary to a VI (VI1) in which one another VI (VI2) is charged. VI1 is used as a module for an Action step in TestStand. Vi2 has controls ActiveX as ExpressionEdit and Adobe PDF reader etc. VI1 VI2 in charge in a subgroup of experts and calls Dialog.vi Modal start. I put 'Show the front panel when it is called' true to VI1 so that the VI appears when the sequence is executed. During the execution of the sequence and when the VI begin dialog is called VI1, all controls ActiveX VI2 (loaded in the Sub-group of experts) modal disappears. Here is the screenshot of the façade of the VI1 operating sequence:
This problem occurs in TestStand 4.2.1 TestStand 2010 and TestStand 2010 SP1 (for as far as I tested it.) May occur in older versions too). In the attached file, VI1 is 'ExprEdit Test.vi' and VI2 is 'SubpanelLoad.vi '. The sequence attached is developed in TestStand 2010 SP1.
How can you solve this problem?
Thank you
Ganesh Kumar
Hi all
Found the solution to the question . The problem is that the front of the VI in which start Modal Dialog.vi is used should not be open before start Modal Dialog.vi is called. In the files that I have included in my previous post, .vi ExprEdit Test (does not work) had the ability to 'See the façade when it is called' enabled in the properties of VI. It was the origin of the problem. When I disabled this option, all started working well (ActiveX controls do not disappear during the execution of the sequence). I had accidentally turned off in .vi ExprEdit Test (work) that worked. A comprehensive review of the differences between the 2 screws led to find the cause of the problem.
Thank you
Ganesh Kumar
Tags: NI Software
Similar Questions
-
How long does take to load lightroom? and how to pause the download and start later?
How long does take to load lightroom? and how to pause the download and start later?
Hi AdobeIDBailey,
The time required to download the product depends on the speed of your internet connection.
The download cannot be suspended once launched, it will stop when you are finished, or if you cancel it.
If you see it is stuck or not moving not quite so if please cancel the download and refer to the steps below and try the download again: (these steps will also increase the speed of downloading as security software can also slow your downloads)
1. turn OFF any security software or firewall installed on your machine temporarily
2 - CUT the browser protection tools or add as well as for now.
Let us know if that helps.
-
Mr President.
What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.
--SL_CUSTOMERS table data INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL); INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL); INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
CREATE SEQUENCE "ALIZA"."SL_CUSTOMERS_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE ; CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS" FOR EACH ROW BEGIN IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN SELECT SL_CUSTOMERS_SEQ.nextval INTO :NEW.CUSTOMER_ID FROM DUAL; END IF; END; /
When I try to insert several records with the seq.nextval it gives error
violation of primary key.
INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd') ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated ORA-06512: at line 1 One error saving changes to table "ALIZA"."SL_CUSTOMERS": Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated ORA-06512: at line 1
Concerning
Mr President.
I find the solution by creating a function before the triiger
as below
CREATE SEQUENCE "ALIZA"."SL_CUSTOMERS_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE ; CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS BEGIN RETURN SL_CUSTOMERS_SEQ.NEXTVAL; END; / CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS" FOR EACH ROW DECLARE dummy VARCHAR2(200); BEGIN dummy := get_SL_CUSTOMERS_vId(); :NEW.CUSTOMER_ID := dummy; END; /
It works very well
Thank you all for the suggestions.
Concerning
-
Hi I am trying to download based on the free trial version. I hane Internet explore and when I click on run a window will open with the sign of the download, but it always remains at 0% and no download is performed. Can anyone help?
Use another browser.
Mylenium
-
I RECEIVED A MESSAGE "WINDOWS EXPLORER HAS STOPPED WORKING" [NOW WHEN MY COMPUTER LOAD UPWARD, ALL WHAT I SEE IS A SCREEN BLACK, NO ICON, NO MENU START, NO WALLPAPER, NOTHING].
AFTER A REBOOT, I GOT A MESSAGE "PROJECT WINDOW HAS STOPPED WORKING. A PROBLEM CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. THE WINDOW CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE. "AFTER HAVING CLICKED ON THE MESSAGE HE OPENED THE WINDOW UPDATE,.
I TRY THE WINDOW UPDATE, I THINK THAT THE UPDATE FOR WINDOWS VISTA SERVICE PACK 2, BUT HE HAS JUST SAY PREPARES TO INSTALL THE UPDATE AND RUNNING IT FOR HOURS, BUT NEVER INSTALL THE UPDATE.
IT OF THE ONLY SOLUTION WINDOW SHOWEVED FOR ME, IS THERE ANY OTHER SOLUTION TO MY PROBLEM?
Thank you
OH I JUST ACCESSED INTERNET EXPLORER, CONTROL PANEL, MY COMPUTER WITH DELL DOCK FOLDER. DELL DOCK IS THE ONLY PROGRAM RUNNING. MY OFFICE IS STILL IS NOT RUNNING. MENU START, THE ICONS, THE WALL PAPER STILL DOES NOT WORK. I STILL HAVE BLACK SCREEN.
I TRIED THE SYSTEM RESTORE, BUT IT FAILED. I HAVVE MY BLACK SCREEN PROBLEM.Andy1502_a,
If you haven't tried the "last known good configuration" among the Advanced startup options then do that first. If this does not help, you must run the System File Checker to search for possible system problems. Then, you must run the upgrade from the system tool and then see if you are able to run the SP2 update. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I search something Firefox automatically opens a new tab with the results of this research. How can I change the settings to where the results will appear in the same tab where I made the research?
If you want to open search results in a new window most often is a parameter of the search engine you use.
-
Windows XP Professional SP3 32-bit - my help and support center is missing. When I click, it says start the service named 'help and Support '. How do I do that?
* original title - lack of help and Support Center *.
Thanks for the help :) Also, when I open my computer or any other program like the trash, the bar on the left side of the screen with the options (i.e., in the trash, which allows me to empty the tray) isn't here... Is there anyway that I can get it? I thought it was something to do with the help and support center, but even after that I got help and assistance, that sidebar is not there...
For this bar, open desktop (or any other folder). Go to tools-> Folder Options and in the general tab, check the show common tasks in the option box of records under the tasks column. The bar appears.
I hope that helps!
-
When I click on any shortcut, it comes up with the screen 'open with '.
I had to restore my system to an earlier date and after I did I wasn't able to use the system shortcuts to do anything. Once I got online, don't know exactly how it happened, I copied a URL and put it in a document, so I could use it to get online. None of my shortcuts work. I tried to use the restore of the system again, but it comes with the same screen that happens with everything - word, excel, - everything what is new. If I want to open a new word document, I open an old and then create a new one. This is what happens when I click on the shortcuts. Also, my security program is not able to work because he has access to the internet and it may not.
Choose the program you want to use to open this file:File: iexplore.exeRecommended programsExplorer Internet Kodak Printer Installer Web InstallerMicrosoft Corp. Eastman Kodak CompanyMicrosoft Security Client configuration Microsoft Silverlight Out of BrowserPitcher of Microsoft CorporationMicrosoft CorporationOther programs
Browse...
If the program you want is not in the list or on your computer, you look for the appropriate program on the web.
OK Cancel
Help, please!Hello
I suggest you to follow the steps from the link below and check if it helps:
Method 1: Try to run fix it from the link below:
http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
Method 2: Change default programs using Set Program Access and computer defaults:
http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaultsMethod 3: Also, try to set the program access security program Internet explorer by default:
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default.
Method 4: Try to follow the steps of below the link, which would help us to open another program it.
http://support.Microsoft.com/kb/950505
However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, proceed as in the KB Article:
http://support.Microsoft.com/kb/322756/
Hope this information is useful.
-
When I turn on my laptop it comes up with the Terminal page.
I had two detections so I cleaned my laptop. Later, once this is done, another notification pops up saying ' help your computer perform, needs of Windows to restart "then it has restarted on its own. Now when I press the 'ON' it starts and remains on the terminal with just a blinking line. If I press any key, it makes a high-pitched beep. Anyone know what I can do?
Thank you
Jodie
Check your computer laptop manual owner or their support web site - it's probably some sort of material error, but I have never heard or seen similar, so check your laptop support equipment to see what that means.
"missjayohdee" wrote in the new message: * e-mail address is removed from the privacy... *
I had two detections so I cleaned my laptop. Later, once this is done, another notification pops up saying ' help your computer perform, needs of Windows to restart "then it has restarted on its own. Now when I press the 'ON' it starts and remains on the terminal with just a blinking line. If I press any key, it makes a high-pitched beep. Anyone know what I can do?
Thank you
Jodie
-
Problem chart/getting updated when you press on the background thread notification dialog box
I have a user who is graphical reports strange behviour after our request and only under the following condiitions alarms:
1 sets of users clock back to trigger the alarm
2 user locked the BB
3. the user receives alarm 1 minute later
4. the user unlocks the BB
The strange behavior is that the background seems to resemble a back buffer bland with a rectangular hole where the notification dialog box should be. The user clicks then the graphics and where the button should be back to normal.
The question is not if the user does not lock the BB first - it's only under the condition of deadlock that the problem occurs. The user statement also sometimes see a dialog "Please wait" when running our application after unlocking, but never when our application is stopped.
Model is 8310 with 4.5 and approximately 3 MB of free space depending on the situation-> filefree.
The dialog box is to be generated and added to the queue by a background thread using the following method:
private void notifyUser(String msg) { UiEngine ui = Ui.getUiEngine(); EncodedImage icon = Theme.getIcon(false, true); Bitmap bm = null; if (icon != null) { bm = icon.getBitmap(); } else { bm = Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION); } synchronized (Application.getEventLock()) { Screen screen = new Dialog(Dialog.D_OK, msg, Dialog.OK, bm, Manager.VERTICAL_SCROLL); ui.pushGlobalScreen(screen, 1, UiEngine.GLOBAL_SHOW_LOWER); } }
I checked the problem does not occur on the "BOLD", Pearl Flip, or 8100 with real hardware. The problem never happens in simulators (tried about 6 models).
Any thoughts? Is there something wrong with the code above or spark a dialogue for a non-event like this thread?
Thanks in advance...
The workaround for the "locked" State is to implement MemoryCleanerListener in your main application class. This listener is notified when the device is locked. We define a property here "deviceWasLocked", then query this property of our custom popup dialog to determine if we arrive on a locked screen.
Then we switch our application in the foreground (requestForeground) that clears up this particular issue, and any event goes well.
The problem of 'missed calls' is a little more complicated, unfortunately, but you're not complaining that one!
Having said all this, I'd love to see other ideas on how to solve this problem. We strugggled for several weeks with this problem when the 4.3 is released.
-
remove the entry from conformation dialog box when the desktop icon to open
delete come conformation dialog when the desktop icon to open. A number of dialog from one on the other. Cannot delete this until the shutdown the computer.
If you want to remove several things, hold down the CTRL key and click on what you want to delete, and then right-click on one of them and click on delete. You will get a confirmation dialog box.
Good luck.
-
I have PC right now and intend to change apple computer this summer.
I want to download creative cloud now on my PC. But I'm worried.
What happens when I switch to Mac after 1 year subscription of the creative cloud subscribe with my PC?
Can I keep the same number of members and just transfer it to my new Mac?
Your subscription allows you to activate on two machines and they can be mixed platforms, so you should be able to have the subscription available for use on a Windows and a Mac computer.
Creative cloud to desktop
https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html
Sign out, sign in | Creative office cloud app
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
Install, update, or uninstall applications
http://helpx.Adobe.com/creative-cloud/help/install-apps.html
-
404 error when open delimited the workflow as a dialog box
Hello
JDev 11.1.2.4
I get a 404 error when I try to open a workflow bounded as a dialog as explained in the documentation: using the dialog boxes in your Application
When I click on the link that is supposed to open the dialog box, I get a 404 error. Then I refreshed the page with F5, click again on the link and it works.
Then I navigate to another page, back page, click on the link and still 404, refresh and it works.
So it seems that when the dialog box is opened first, there is something wrong. I read on a blog that can be caused by a timeout for the session.
Here's the track in IE because it occurs in Internet Explorer, with a browser not certified such as Chrome and Firefox, it works great!
/ ViewController-context-root/faces/MyTaskFlow/SelectPosition? _adf. CTRL-State = zld4v109w_137 HTTP Download 200 text/html 8.10 KB 78 ms frames navigation 9797 0 78 0 0 203 / ViewController-context-root/faces/MyTaskFlow/SelectPosition? _adf. CTRL-State = zld4v109w_137 HTTP Download 200 text/html 1.68 KB Ms 46 frames navigation 9907 0 31 15 0 125 / ViewController-context-root/faces/MyTaskFlow/SelectPosition HTTP Download 200 text/html 1.73 KB 63 ms frames navigation 9953 0 63 0 0 62 / ViewController-context-root/faces/MyTaskFlow/SelectPosition? _adf. CTRL-State = zld4v109w_141 HTTP Download 404 text/html 1.68 KB Ms 46 frames navigation 10032 0 46 0 0 0 Related Posts: https://java.net/jira/browse/ADFEMG-180
Updated link to date.
-
When vmware tools can be installed on windows 8 with the display driver
Hello
I have problems with the installation of vmware tools on my windows virtual machine 8 in 9 workstation, and I see that this is a general problem.
So when will there be an upgrade for it?
Thanks in advance
Carsten
So when will there be an upgrade for it?
It will be the point in time that he came out and not before! (VMware does not disclose this kind of information by their policies.)
-
RWhen I try to hang a new monitor with VGA computer cable runs and gives me the BIOS display then it starts to load microsoft. After a few seconds (maybe 30) it says no "supported" thanks for any help.
Kraggyemember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
It's good to hear - it means that the monitor is OK and that it is compatible with Vista. It is still unclear on the video card or the motherboard on the computer (or any other problem this computer might have) = but one step at a time. You have made great strides and ruled out several possible causes that we must now check or test.
What is the EXACT error message you are getting (Word for Word)? Which is the key to product, the manufacturer, brand, model and serial number or your computer (I assume it's using the original video card)? What i the manufacturer, brand and model of the new monitor?
Even if you could get the Microsoft drivers (which I don't think you can), you should take them to the device manufacturer or the manufacturer of the computer, if they moved on the computer. They are likely to be more current and have fewer problems. And you want drivers, firmware and software necessary or required by the device (they will be either the list which is available or you can ask for help and they should direct you to what you need). Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get drivers (and you shouldget to the monitor, the video card and the motherboard and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.
I hope that drivers will solve the problem. If not, we have to try something else (not sure what yet, but we will come with an option).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
I renamed a folder and it disappeared. How to retrieve it?
Please forgive this if redundant post, I received an error message when I posted this. I renamed a folder in Thunderbird, but it disappeared immediately. I opened all closed files to ensure it had not moved, but it does not appear on the left side of
-
Hello. Where go I find the CONTROLLER of BUS SM driver. HP pavilion 1251er g7
-
Bookmark files do not work, and I can't click the button feedback gives, the new facility of FF.
-
Satellite A60: Can I install Vista and where to find the drivers
Hello I have a SATELLITE A60: pentium 4 HT 3 GHz, 512 MB RAM, disk HARD 40 GB, LAN/WAN/WIDI, irda,. I want to know if I could install windows Vista Ultimate Edition, and where can I find appropriate devices for Windows Vista drivers. Thank you
-
Hi all!I'm new to this so you do not laugh too if my question is stupid! I have a laptop of equium A60-155 with graphic 64 MB built in, is it possible to upgrade to 128 MB or higher at all? I got different answers from different people so wanted to k