Adaptation of one fla to another MovieClip doesn't work well

Similar Questions

• Transfer from one Mac to another catalog does not work?

  I copied an entire Lightroom Catalog folder from one Mac to another, and I placed it in the Documents folder on the new Mac. I expected just open when I launched CC2015, although she does not.

  1. what should I do to repoint CC2015 in this catalog folder?

  2. to do this, I can place the main folder anywhere on the computer too long that I indicate in LR it where? Are there benefits to be placed in any particular place, or is it just the preferences of the user?

  Thank you.

  IMO, you should keep records high-lit & files to the screen clip below.

  That is to say. Your most recent work catalog dated February 27, 2016 with its record of previews.

  and keep a few folders of backup.

  All the rest could be deleted.

  Catalog backups must be in the same folder as your catalog of work - if the disk drive fails you have lost a lot. !!

  

  The catalogue dated February 9, 2016, {Lightroom Catalog.lrcat 5} can also contain development not in the catalogue 27 Feb. -then maybe preserve also!

  You could remove the 'Previews' folder, but Lightroom will slow down a bit because he rebuilt the previews when you reopen {Lightroom Catalog.lrcat}

• Copy Movie Clip from one FLA to another

  I'm on CS4, but most of my clips are written Actionscripts 1 and 2.
  
  I have a sound control in one of my movies that I would like to copy on my next project. Is it possible to copy the clip to a FLA and then paste it into a second FLA?
  
  Thanks Ahead of time for your help...
  
  Take care
  Rich Wendrock

  Firstly, the two FLA should be written in the same script of action, such AS 2 or 3 AS, you can't have one written in AS2 and the other in AS3 (unless it isn't no matter what coding in the mc), then you just open the two fla, open the library files and drag one to the other a It will copy all of the files associated with the mc.

• How is my MovieClip doesn't work?

  What I'm trying to do is create a series of clips in my flash (through actionscript) project to create a scrolling background. But I'vev ran into a strange question.

  For some reason even if I think that I add the movieclips correctly to the scene, all the variables are set to zero.

  Here is the code in my main script that I use to create clips (GrassTile)

  [code]

  var grassHolder:Sprite = new Sprite();

  addChild (grassHolder)

  for (var i: int = 0; i < 5; i ++)

  {

  grassHolder.addChildAt (new GrassTile (i), i);

  }

  [/ code] (and if you know a BBCode to display of the labour code, it would be also useful )

  And here is my GrassTile class: I cut out the unimportant stuff. I can add in more later if necessary there.

  [code]

  package {}

  Import 12345678910111213import;

  import flash.display.MovieClip;

  import flash.events.Event;

  SerializableAttribute public class GrassTile extends MovieClip

  {

  private var _root:MovieClip

  private var grass: Bitmap;

  public var id: int;

  public void GrassTile(id:int)

  {

  This.x = 100

  This.ID = id;

  addEventListener (Event.ADDED_TO_STAGE, onEnterStage);

  }

  public function updateGrassTiles (): void //called on the main timeline

  {

  This.x = (this.width 0%) + (this.width * (id));

  This.y = stage.stageHeight - this.height;

  trace (this.) Width);

  trace (this.x); These traces back only '0' unless it was the last created

  }

  private void onEnterStage(e:Event):void

  {

  removeEventListener (Event.ADDED_TO_STAGE, onEnterStage);

  _root = MovieClip (root);

  grass = _root._resource. GrassImage;

  addChild (grass);

  }

  }

  }

  [/ code]

  As I said in the comments in the code, when the GrassTiles are added, everyone except the last one added returns 0 for the x and width and does not add the Bitmap image.

  Thanks in advance!

  Try this - it clones (should clone - I didn't test it) bitmap

  package
  {
      import flash.display.Bitmap;
      import flash.display.BitmapData;
      import flash.display.MovieClip;
      import flash.events.Event;
  
      public class GrassTile extends MovieClip
      {
          private var _root:MovieClip
          private var grass:Bitmap;
          public var id:int;
  
          public function GrassTile(id:int)
          {
              this.x = 100
              this.id = id;
              addEventListener(Event.ADDED_TO_STAGE, onEnterStage);
  
          }
  
          public function updateGrassTiles():void //called from the main timeline
          {
              this.x = (0 % this.width) + (this.width * (id));
              this.y = stage.stageHeight - this.height;
              trace(this.width);
              trace(this.x); //These traces return only "0" unless it was the last one created
          }
  
          private function onEnterStage(e:Event):void
          {
              removeEventListener(Event.ADDED_TO_STAGE, onEnterStage);
              _root = MovieClip(root);
              grass = cloneBitmap(_root._resource.GrassImage);
              addChild(grass);
          }
  
          private function cloneBitmap(bitmap:Bitmap):Bitmap
          {
              return new Bitmap(bitmap.bitmapData.clone());
          }
      }
  }
  

• Bearings of MovieClip doesn't work is not on the different frames

  I create one interactive which consists of 3 cards, each on its own tab. On each map, there are several circles that represent data for a particular city. I want the circles to display a text containing pop up when roll you all of them. Because I don't want the Plains old buttons, I use 2-frame-clips video, where the second picture represents the rollover State and a text box fades as follows:

  mntextbox2.addEventListener (Event.ENTER_FRAME, fl_FadeSymbolIn_4);
  mntextbox2.Alpha = 0;

  function fl_FadeSymbolIn_4(event:Event)
  {
  mntextbox2.Alpha += 0.1;
  If (mntextbox2.alpha > = 1).
  {
  mntextbox2. RemoveEventListener (Event.ENTER_FRAME, fl_FadeSymbolIn_4);
  }
  }

  This all works fine, and I can get several buttons working on the first tab (part 1) by grouping them in a clip, as follows:

  buttongroup.buttonMode = true

  
  buttongroup.addEventListener (MouseEvent.MOUSE_OVER, onButtonOver);
  buttongroup.addEventListener (MouseEvent.MOUSE_OUT, onButtonOut);

  function onButtonOver(e:MouseEvent):void
  {
  e.target.gotoAndStop (2);
  }

  function onButtonOut(e:MouseEvent):void
  {
  e.target.gotoAndStop (1);
  }

  The problem is when I try to use the same or a similar one with a different set of buttons on the second tab (picture 15). I put a similar set of actionscript on frame 15. The buttons seem to accept the buttonMode = true command, but I absolutely can't bearings to display. I tried to use the names of different function for the MOUSE_OVER and _OUT events, nothing helps. I get no error and nothing appears in the output - it only acts as if there is no law to display.

  I somehow put all the ACEs on frame 1? Is this a problem with ENTER_FRAME in the bearings? Thank you very much.

  Is there a relationship between 'ButtonGroup' and mnbuttontab2?

  The only code you need in frame 15 for rollover/out should be...

  mnbuttontab2.buttonMode = true

  mnbuttontab2.addEventListener (MouseEvent.MOUSE_OVER, onButtonOver);
  mnbuttontab2.addEventListener (MouseEvent.MOUSE_OUT, onButtonOut);

  as they should be able to use the same basic functions 1 without their rewrite in the frame of 15.

  Have you tried to trace() calls in your frame 15 event handler functions to see if functions are called?

• SWF inside movieclip doesn't work do not

  I have four buttons in movieclip inside a swf file. (External Swf) Different layers

  I need to access these buttons separately.

  If the external swf file is as3 AND has finished loading, you can reference the main timeline by using the content property of your charger cast as a movieclip.  from there, you use the usual point notation to reference your buttons:

  MovieClip (yourloader.content) .btn1

• tried to move a domain from one site to another site, did not work.  Now my site is down, my email is down.

  And when I try to enter the domain name, he tells me it already exists!

  Hello

  I would recommend reaching out to direct support on the chat/case.   - http://docs.businesscatalyst.com/

  Have your domain URL and site ready team will focus on this new.

  Kind regards

  -Sidney

• reently downloaded updates and now my computer doesn't work well, I get a mozilla does not message every time I try to look for

  After updating my mozilla, I get a message not responding

  Hello bwallace57, your "more detailed system", it seems you have a little suspect for malicious software extensions (GetSavin, MyPoints Score!, MyPoints Toolbar, entry-level consumer).

  You can verify the behavior of firefox in safe mode (safe mode are disable the extension)

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  also, you can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  et Check in the Windows Start menu > Control Panel > programs > uninstall a program, uninstall everything related to the above extensions

  and finally remove the User.js filein your firefox profile folder .

  (The user.js file does not exist by default. If you create the file, forget it, otherwise, please note that some programs to create and write in the User.js file also).

  Thank you

• Tabs above the address bar doesn't work well with the QuickLaunch Dock - do I have to return to FF3.6 for tabs on top?

  Although there are other minor problems with FF4.0, I guess a lot of people are going to get worked in the future updates (I'm confident Mozilla will be as great as they were in the past with these problems).

  The main problem I have (I don't think that will look) is to have the tabs at the top of the window. I have a quick launch Dock that is displayed when the cursor is at the top of the screen for ~1.5 seconds more, and if I hesitate on a tab, it appears and I have to click here to dismiss my QuickLaunch Dock.

  Under the address bar tabs were not distracting - the address bar is much more annoying. At least the legs have a description text of the page, rather than a drawn URL...

  I don't want to go back to FF3.6, as other changes of FF4 - doesn't bother me, but if the tabs should stay at the top, I'll have to switch to Chrome or Safari.

  Right-click on a toolbar, and then click the entry "Tabs" at the top to deselect the it.

• CP8 Interactions and slides with audio and closed captions - doesn't work well - please help

  Well, I use cp8 on a 64-bit windows computer 8. I placed an interaction on a slide. I have also audio on this slide and closed captioning.

  When I get to the slide, the audio is not because the mere fact that the interaction is there made the slide one break to enter. The student should I click play on the Player bar to go, but which is not required on slides without interactions, so I don't like this solution. I could also make a slide on enter play Audio and choose the wav file, but then the subtitles are not displayed.

  So the question is, how do I slide automatically play the audio level of the blade without the student having to click on the play button to go? Slides with interactions should behave exactly like the other slides with objects/widgets on them. This automatic suspension thing is driving me crazy!

  Thank you

  Lori

  Lori, this is confusing! You're talking about one of the learning interactions included with Captivate? If Yes, which? My amazement is due to the fact that what you described, it is what has happened to the COP6: interaction paused to slide to the first image (I got a work around for audio). But given that CP7 interactions do not hang any slide, you will need to provide the break yourself. There are a few exceptions closely (games).

  Lilybiri

• Why should I update to the 'New' Firefox, when, by doing so, I have to Disable Symantec? If your system doesn't work well with it, so I'm in a dilemma, because I need this program to offer all the protection that I absolutely need the Web.

  I get a pop up asking me to upgrade to the new Firefox, but then I get a notice that the upgrade will not work with Symantec, my Norton account that protects my machine of various things on the Internet. I just won't do that. He must either find a way to do the upgrade works with Symantec, or buy some other, equal protection for me.

  Firefox is not disable the entire program Synmantec, just the Symnantec of extensions for Firefox. And these extensions can be easily updated to the new version of Firefox by running a Symantec / Norton Live Update, the new version of Firefox is installed.

• Finder doesn't work well, even after "Killingall Finder"

  Hello world

  I have a MacBook Air on Mavericks OS X 10.9.5

  My Finder is not working properly and I tried Killingall Finder into the Terminal that solves the problem for a while, but after a few seconds, it will work again.

  The Finder window seems to be freeze and I can not choose any item or close it or anything. I'm afraid that there could be a bug, because I saw a few football matches on rojadirecta.com,wiziwig.TV which I know is not a true web site.

  Any help will be appreciated. Thank you!

  Try to open the menu to go with the Option (Alt) key - Library - Preferences button and find the file called "com.apple.finder.plist". Move it to the trash, and then restart your computer.

• I just made a purchase for an app that doesn't work well, how can I request a refund?

  How to request a refund for a purchased app from the store?

  You need to contact iTunes Support:

  iTunes worldwide support

  or by e-mail:

  iTunes ww email support

  See you soon,.

  GB

• Satellite L650 doesn't work well after the BIOS 2.40 update

  Hello

  I have a L650 Psk1je yesterday, I updated my bios to 2.20 to 2.40 and since then my laptop does not work well
  can someone tell me please how to downgrade my bios to 2.20 again

  Thank you

  Downgrade BIOS can be done using only a traditional BIOS version
  These versions are not available for download.
  You can download only the latest BIOS based victory.

  But why do you say that it is not working properly?
  What s wrong?

• HP Deskjet 5940, properties, "the impression sample" doesn't work well. "

  When I want to see an example of printing before it starts the actual print - I defined this... so, I see a former printing sample. When I ignore this and do actual printing is printing I really wanted. When I repeat this action, then I get the real impression sample. Only after restarting the computer the problem is there again: I see the same old printing sample, only the first time. If this sample printed old sticks in the memory and I still see and only when I order the first printing after starting the computer. Actual printing will be anyway.

  Finally I found the 990c deskjet, but also it did not solve my problem, because it is not an overview either work. I still have to fix something: I use OS Windows7 (8 instead, what I said in my answer 20121219) but I think that has no influence on our communication. Anyway thanks a lot for your help and I accept this little inconvenience in my software printer deskjet 5940.