Adaptive Wide Angle - control of the tools of coercion

Similar Questions

• cursor Details mode not aligned with the cursor in the image when you use adaptive wide angle

  Imported a Fuji raw image in Ps 2015 CCfrom Lr 6. The cursor is in the detail view does not point to the same place in the image. There is a lag of about 0.25 inch, regarding the image of the screen

  There was a problem with that in Camera Raw, but I'm not sure LR & PS. It happened on Windows, when the size of the default text for the operating system was not set to 100%. I thought that this problem has been fixed in the latest updates of ACR.

• Angle control via the Wacom stylus wheel - how to?

  Hello

  At school, I started using a Wacom Intuos4 tablet with Photoshop CS6. And that's it works really well and give me nice results, but one thing I can't understand.

  I want to control the angle of a specific brush through my the intuos pen wheel.

  I thought I found all the important parameters, but somehow I can't make it work.

  Photoshop brush Panel is configured for that, right, correct?

  

  Somehow this small exclamation mark beside him, bothers me a bit, but if I choose 'tilt of the Pen' I also this exclamation point, but it still works...

  would it be because of some pilot things?

  Although I use the most recent available for intuos4 wacom driver.

  Maybe I have the wrong settings in my system prefs?

  These look like this, but unfortunately only in German.

  

  I thought, 'anwendungsdefiniert', which means something like "defined by the software itself" should do the trick. But then I don't see anything happening...

  Someone who can tell me how I should configure things?

  Thank you very much in advance.

  See you soon

  

• Automated control of the option line in the Clone Stamp tool. Intentional? Or my installation?

  Hello

  Today, I noticed an "Aligned" somewhat unusual in the Clone Stamp tool when behavior is deselected. By double-clicking on the image with the button alt or option key causes of the behavior of the tool of change and 'Aligned' to become verified. So if you do not intend using aligned, you alt/option click of your mouse to point the source, decide on a different source point, click alt/option and all of a sudden you find yourself using an aligned clone stamp.

  This does not happen with the Healing Brush tool, which makes me think this isn't an intentional shortcut. It is also powerful irritant.

  I tried it with x 64 and x 32 CS6 on Windows. It happens on both. It also happens on the Macintosh? Is it possible to turn off this behavior?

  Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08 / 08:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  Best wishes

  Dave

  Discussion title has been edited by: Dave S.-C.

  OK, according to Jeffrey Tranberry, there is currently no way to change this behaviour given - reset tool (something that I constantly forget!) reduces the time that the second click took to be recognized, allowing better control of the tool for me. Hope this helps someone in the future.

  If changes should be made to this I would double click switch to be turned off completely.

  Post edited by: Dave S-C (corrected name of JT)

• Camcorders that can adapt to a lens wide angle?

  Can someone help me please? I'm looking for a camcorder wherein I can fit a lens wide angle to cover a wider area. can someone tell me what are the camcorders sony I can set a goal wide angle. Also I would like to know what lens wide angle corresponds to this particular model. On a side note, I already have a CX380 HDR, but it seems I can't attach a lens wide angle as it has no son. Thanks for your help.

  I discuss with a representative and it gave me these two links. It gives you the lens and compatible camcorders that work with the lens. Hope this helps other too.

  http://ACCY.sonydigitalimaging.com/products/model/VCL-HGE08B

  http://ACCY.sonydigitalimaging.com/products/model/VCL-HGA07B

• I own the Canon SX HS 50 and love it, however, I like the lens wide angle on the SH SX60

  Canon sx hs 50 is a bit amazing camera with the possibility of zoom to large and clarity.  I had a little more than a year.  The new sx 60 SH has some new features that I like... the lens wide angle and the creation of custom effects.  However, the stability of the camera is very fragile when zoomed out.  I question the value of the upgrade of the 50 to 60.

  My shots are more abstract... by zooming in on the structures, eyes, etc.  I can take pictures of my car with the 50 but not sure that this would be possible with the 60.  I appreciate any input... or is there another cannon with the lilke long zoom of 50 with some of the features of the 1960s.

  Thanks a lot for your comments,.

  I don't have one. But you said you've tried, so I guess you tried in store right? In-store, normally the brightness isn't enough so the shutter speed will be slow and you will see shake. In addition, setting the device also comes into play here too. The best way, take the 50 SX with you to the store, set the similar to your 50HS 60HS. Then take the photo and compare. Sometimes, in the store settings are not optimal.

• In the Control Panel administrative tools

  In the Control Panel administrative tools are missing. Is it possible to download or restore these tools?

  Sorry my mistake, try this one instead: http://windowsxp.mvps.org/admintools.htm

  --> I hope this helps! Please vote or mark as correct answer if it doesn't :)<>

  http://www.xinx.co.uk - my website
  http://www.systems-and-solutions.co.uk - where I work

  
  Microsoft info on phishing
  Information for Microsoft on the fake security software

• How can 13 Photoshop elements in Expert mode, I stop a control panel appeared at the bottom of every time I pass the tools?

  In Photoshop elements 13, in Expert mode, how can I stop a control panel appeared at the bottom of every time I pass the tools?  I'm just trying to compose by switching between the zoom and hand tool tool. Whenever I pass, a control panel appears. I have to manually hide the Panel each time. Which seriously disrupts the flow of what should be a task simple, zoom / move. I don't remember this annoying behavior in my previous versions of the software...  Can someone please advise me how I can stop? I thank very you much in advance!

  Lingyaiyai wrote:

  In Photoshop elements 13, in Expert mode, how can I stop a control panel appeared at the bottom of every time I pass the tools?  I'm just trying to compose by switching between the zoom and hand tool tool. Whenever I pass, a control panel appears. I have to manually hide the Panel each time. Which seriously disrupts the flow of what should be a task simple, zoom / move. I don't remember this annoying behavior in my previous versions of the software...  Can someone please advise me how I can stop? I thank very you much in advance!

  What you see is the tool options palette.

  The interface has been changed from 11 items on.

  It seems logical to view options when a new tool is selected. If you don't want to, look at the upper right of the tool options palette. You can open a menu in which you remove the check mark in the box to automatically display the tools/options.

  When you're accustomed to older versions of elements, it is a good idea to read the section on areas of work and the environment, in particular on the bins.

  Photoshop elements help | Photoshop elements help

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• In android, is it possible to control the flow of the tools rather than letting users choose? for.e.g. launch the first harvest and then rotation function after users click on "Apply"?

  In android, I would like to have control over the flow of the tools. I want users to rotate and crop everything first, before they don't embellish other stuffs.

  You can get better help in a forum for the program that you are using

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it says all communities) to open the drop-down list and scroll

• Acrobat XI Pro how can I control the opacity of the tool 'add a text comment "?

  It displays 40% Transparent and even with the properties bar open when I select the text there is no place to control and change it to display at 100%? I don't have this problem with the tool "add text box '... I can control the transparency of the text set of properties box. But impossible to find where the transparency of the tool control 'add a text comment' at all... Thoughts anyone?

  BOOM! Found on another forum.

  «Looks like the default opacity have somehow got will mark the beginning for this annotation type.» To check, you can check the following Windows registry key:

  HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\7.0\Annots\cAnnots\cFreeText_003aFreeTextTypewriter

  for an entry "dopacity". Is there such an entry on your machine, and if so, what is its value?

  George ".

• Photoshop CC - can't control + click to select a different form while using the tool pen?

  I used the tool constantly feather in photoshop cs6 and would often use control + left click to select a different shape using the pen tool.

  Now, I have to switch to the move tool to select another layer? Why this feature has been removed / changed?

  Difficulty: After sleeping more, here is how I fixed it:

  The new Direct Select tool by default is set to layers "active." Switch to "all layers".

  

  Post edited by: Joe Horan

  A new problem = select several points with control + click + drag is to select all shape layers... Jesus Christ, why is this changed?

  I must now double click on the form I want to choose? Why? What is the point of this?

• How to get the value of the angle of view rotation tool?

  Hello

  I want to rotate the brush tip with the rotation tool to view, given how it works now screw to the top of my brush strokes.

  (compare the two lines here - features on the right are made with the rotated view: http://img221.imageshack.us/img221/2016/psnightmare.jpg ( )

  I found how to change the rotation brush tip on this page:

  http://www.PS-scripts.com/BB/viewtopic.php?f=25 & t = 2801 & start = 15

  But how do I get the value of the angle of the tool and rotate the display...?

  As far as I know, all you can script with the rotate view tool is to select the tool itself. Unlike most other tools, you cannot use same tools preset with the display rotation tool. So I don't think it's possible set or get the angle of the view.

  You can also test the setting of the rotation brush with your brush settings. There may be questions if the brush is a sampled brush and the brush in your screenshot looks like a sample brush for me.

• Align the tools not showing control bar (PC)

  On my Mac, a ton of tools are on the control bar, but not on the PC. I tried to make the resolution of the screen top (to see more of the screen), but that did not help. The alignment of the tools are not there and other things. InDesign 2.

  In ID 2 and upwards through the 4 ID (CS2), what you see in the control Palette is what you get. No customization is available, and there is no tool 'extra' that there are in the newer versions. The palette is sensitive to the context, so if you mean, alignment tools, a paragraph alignment, you must have the text tool is active and be in paragraph mode, if you mean alignment object, you must have two or more objects selected with the selection tool.

• How to recover a selection of the screen using the tool of cross hatching? S worked on the old pc to control...

  I used to be able to select a piece of the screen using Ctrl-S, how I got a cross-hatch tool (it looks like the Selection tool in Photoshop)

  Please help - lost without this feature!

  Maybe your version of Vista has the Snipping Tool...

  Windows Vista - activate the Vista Snipping Tool
  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  Use capture tool to capture screenshots
  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Vista tutorial - How to use the tool captures of Vista
  http://www.Vistax64.com/tutorials/148532-how-use-Snipping-Tool-Vista.html