cursor Details mode not aligned with the cursor in the image when you use adaptive wide angle

Similar Questions

• Can not get on the internet when you use the merge with WindowsXP

  I upgraded to Fusion 2 and am running Windows XP.  Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows.  Now I find that I have to check Windows after 30 days.  I can't WMWare to help me after 30 days of free support (which is a bunch of Bull).  Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work.  Can someone help me please?

  Jim

  JudgeJim wrote:

  Problem: I can not go on the internet whenever I'm on Windows.  My Mac is not a problem with online.  When I start the merge, I agree, but when I start Windows XP, it tells me this:

  Could not open/dev/vmnet8:

  No such file or directory.

  Virtual device Ethernet0 will start disconnected

  Sometimes it will say instead of vmnet8 vmnet0

  If you have found errors like that something is not right.  Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.

  I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).

  This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal.  So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.

  I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.

  I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help

  If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network.  If you change the types of networks while the guest id launched, you must release/renew the IP address.  Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.

  I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.

  Uninstall/reinstall Fusion and restart the Mac.

  Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.

  If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  This occurs when calling a ref cursor-returning packaged function stored with OracleCommand.BindByName set to true.

  When BindByName undefined, it works as expected.

  I've only been able to recreate this problem on a machine in my control. This issue has also reported to me by a customer.

  I tried to change the locale of the system of EN - UK EN-US, but I was not aware of any change in behavior.

  Similarly, I've tried explicitly overriding the default locale of the system with the OracleGlobalization parameters, and it also had no effect.

  Please see the example below.

  ---

  Environment (default):

  Windows 7 Professional 64-bit SP1

  Visual Studio 12.0.21005.1 REL / / CAN BE SIGNIFICANT

  .NET framework 4.5.51209

  Local system: EN - UK (but also does not, EN-US).

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Environment (base):

  Windows 7 Professional 64-bit SP1

  Updated Visual Studio 12.0.31101.00 //SEE above 4

  .NET framework 4.5.51209

  Local system: EN - UK

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Call stack:

  	mscorlib.dll. Unknown System.Number.StringToNumber(string str, System.Globalization.NumberStyles options, ref System.Number.NumberBuffer number, System.Globalization.NumberFormatInfo info, bool parseDecimal)
  	mscorlib.dll. Unknown System.Number.ParseInt32(string s, System.Globalization.NumberStyles style, System.Globalization.NumberFormatInfo info)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Types.OracleRefCursor.OracleRefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.ServiceObjects.OracleRefCursorImpl refCursorImpl, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long initialLongFS, long initialLobFS, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.ExtractRefCursorFromAccessor (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution, int currentRow) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.GetRefCursorFromBytes unknown (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleParameter.PostBind_RefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.TTC.Accessors.Accessor bindAccessor, long fetchSize, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleCommandImpl.ExtractAccessorValuesIntoParam (Oracle.ManagedDataAccess.Client.OracleParameterCollection paramColl, Oracle.ManagedDataAccess.Client.OracleConnection connection, string commandText, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! Unknown Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader(bool requery, bool fillRequest, System.Data.CommandBehavior behavior)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (unknown)

  > ManagedSimpleRefCursor1.exe! NoddyConsole.Program.Command_ExecuteReader_BindByName_Fails (Line 63 c#)

  Example:

  ----

  using System;

  using System.Collections.Generic;

  using System.Linq;

  using System.Text;

  using Oracle.ManagedDataAccess.Client;

  using Oracle.ManagedDataAccess.Types;

  using System.Data;

  namespace NoddyConsole

  {

  public class Program

  {

  public static int Main (string [] args)

  {

  Error int = 0;

  Errors += Command_ExecuteReader_BindByName_Fails();

  Errors += UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails();

  return errors;

  }

  public static int Command_ExecuteReader_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  var conn = new OracleConnection ("user Id = UNIT620; Password = UNIT620; ("Data Source = / / ln1apidb01:1521 / fm");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  cmd.CommandType = CommandType.Text;

  BindByName. cmd = true;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader(); FAILS to System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  /* *-/

  OracleRefCursor orc = null;

  cmd ExecuteNonQuery()); must fail here

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  /* */

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  public static int UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  BindByName. cmd = true; // ####

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_2; END; « ; No params, works

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader();

  OracleRefCursor orc = null;

  HERE does NOT cmd. BindByName = true; System.FormatException first-chance exception in at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  cmd ExecuteNonQuery());

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  ORC. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  }

  }

  ---

  create or replace package THAT SHAUN is

  type ref_cur_type is ref cursor;

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type;

  end SHAUN;

  /

  create or replace package body what SHAUN

  -TTS000233

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type is ref_cur ref_cur_type;

  Start

  Open the ref_cur for

  Select UO.object_name from user_objects UO;

  Return ref_cur;

  end recreate_issue_1;

  end SHAUN;

  /

  ---

  Thanks a lot to qualify again for me Alex.  I'll try upgrading to the latest version of the provider.

  The difference in behavior between the two hosts was found to be reduced to differences in configuration VS.

  Checking 'Just my code' prevents the first chance thrown in the debugger exception. As in fact, the exception is handled in the provider, it is enough for me.

• Why do I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  WWhy I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  It is a known issue and Apple is working on a fix for 9.3. This article summarizes some of the problems with the current version.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• can not connect because the logon method, you use is not allowed on this computer.

  I have a new computer that is joined to the domain, but in trying to have a user login, I get the following error:

  can not connect because the logon method, you use is not allowed on this computer.

  The only way for him to connect is to change its parameters from the user to the administrator. I tried power users and other options and did not work.

  is there any solution for this?

  Hi Snidera,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  Francine simply connect to the internet periodically to receive updates and validate your membership.  If you have an annual membership, you can be disconnected until 99 days.  You can find more details in the help of Activation & deactivation.

  I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• How can I customize the toolbar when you use the browser of the attribute

  In CVI 2012, changes in the toolbar depending on the environment, for example, it is different to the source window and the user interface editor. The toolbar can be customized using the Options menu / toolbar...

  Unfortunately, when you use the browser of the attribute of the user interface editor, another toolbar is displayed, i.e. not the UI Editor toolbar... I would have assumed that the browser of the attribute belongs to the user interface editor, obviously this isn't... So, how can I customize the toolbar when you use the browser of the attribute?

  
  

• Artifacts of the screen when you use the stamp tool

  Has anyone seen this?

  When I use the stamp tool I get all kinds of objects on the screen. Weird thing is when I do a screen recording of it, it's much less obvious but nonetheless still there. If I want to make a screenshot of it he disappears as soon as I touch the screen capture key (cmd-shift-3) or toch any key.

  So I had to take a picture with my phone:

  

  I tested VRAM / my different applications with dedicated GTX680 GPU / benchmarking utilities and results all seem well, games work fine, any application that uses my GPU works very well. Except of course Illustrator, which crashes all the time when you use GPU performance. And now Photoshop.

  A video of these objects can be seen here: http://www.studio57.nl/downloads/PS_Stamp_Sreen_Artifacts.mp4

  I'm on Mac OS X Photoshop CC 2015.1.2 10.11.3, and the last 346.03.05f02 of Web Driver nVidia.

  It seems that it is. I had the form of the word NVIDIA, they were able to reproduce to the issue and they are working on a fix.

  I'm so happy that my hardware is fine and that NVIDIA is still developing drivers for the Mac community!

• How can I change the scale when you use the measure tool

  How can I change the scale when you use the measure tool

  With the tool selected, right-click the document, and then select "rate of change of the scale.

• Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

  I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

  Hello

  Open the control panel-> mouse. There should be an option to disable the touchpad.

  Good bye

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• Nested tables will not align with the primary table

  
  Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.
  
  Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.
  
  I enclose the code for your information (line 165, 166).
  
  Thank you for your time and your suggestions. I really appreciate it.
  
  

  Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
  wrote:

  > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
  > see the picture under the main menu align with her on the
  > right side.

  Change this:

  
  
  
  

  To do this:

  <> SRC = "img/place_second.jpg" width = "572" height = "200" > "

  
  align = "right" >
  
  <>
  SRC = "img/place_second.jpg" width = "572" height = "200" > "
  

  Gary

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.