Add a Mac?

Similar Questions

• How to add a Mac to an existing network of Wrt160N

  I have a work network, set in place using a XP computer. I added the devices successfully wireless in the past. I am trying to add a Mac, but it asks a passwork. There is no password that I know in the wireless setup and didn't have to do it on an XP.

  I use WPA2_Personal security. I can connect correctly using a wired connection.

  Any ideas? I was told that it should be easy.

  Update: I found the password that I was telling him typing was not well done. As soon as I touched him "show password" I could see that it wasn't the right plugs.

  Problem solved.

• Try to add my Mac to a Windows Home Group

  I have a Macbook pro and try to add to my home group (Windows)

  I can see my desktop or laptop in the finder on the MBP but there ask the office password, I entered every password I don't know and I have no reason to, where can I find the password or should I ask this question on a community of Windows?

  Thank you

  OS X Mavericks: set up a Windows computer to share files with Mac users

  OS X Yosemite: set up a Windows computer to share files with Mac users

  OS X El Capitan: set up a Mac to share files with Windows users

• Skype adds the mac address book contacts, these people will be notified?

  OK, so I downloaded Skype, very well.
  Skype automatically adds everyone in my mac address book (which I haven't checked over the years, is full of people I don't like and don't talk to!)
  My question is, because Skype has added these contacts in my address book, these people will be notified somehow?
  
  (Find it me * very * irritating I was not asked or encouraged that my address book stupid personal from my computer to add to Skype) n):

  They won't be notified somehow. All Skype does is to read your address book and, if you do not want it to do this, go to Skype\Preferences\General and a tick 'view the contacts address book '.

  A little research in the preferences helps a lot! ;-)

• Windows Server 2008 R2, with two Windows Storage Server 2003 Standard: How can I add the MAC authentication on top of Active Directory authentication for a storage servers?

  I have two running Windows Storage Server 2003 storage servers in a domain R2 Windows Server 2008 Standard.  On top of the Active Directory authentication, I want to add authentication of MAC address for the access to one of the storage servers.  In this scenario, an authenticated user is unable to log on to the target storage server unless the user is also on one of the computers MAC address accepted.  All domain users will have access to other folders and files as configuration storage server in Active Directory.  I already have a user access to installation by the permissions for folders on the storage server target, but I still want to restrict access to specific computers as well.  For what it's worth the server hardware is HP Proliant DL360 G5 for the Standard Server 2008 R2 and server HP Proliant DL185 G5 for two Storage Server 2003 computers.  I don't want to have MAC address authentication as the main means of access control to the network, only for the storage server a as an addition to control Active Directory.

  Hi Kerry,

  The question you posted would be better suited in the TechNet Server Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us informed on the status of the issue.

• Add new Mac full time Capsule (delete old backups)

  So I have an old time Capsule (mini mac in the form). It is almost full. It backs up all three machines. We just be removed and replaced with a new one.

  The new machine will have to be added, but the TC is too full.

  I'm happy to delete the backups from the machine, it has replaced, however the machine is no longer on the network and does not remove its own backups.

  I can't delete the full backup set and leave all three machines.

  How can I delete just the backups of the machine which is now out of the network? SSH? tmutil on one of the machines still present?

  You can access a backup from another machine and work with it. The answer is here: visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini, the site is is no longer updated. Therefore, some information may be somewhat outdated.

• Adding an Apple TV 4 to one address active MAC network, what a task.

  Not sure if this is the right place to post this.

  I helped someone get their 4 ATV connected to a network address mac-compatible. Normally it's pretty easy. WIFI MAC address are on the box or the documentation. Not so in this case. How Apple has it set up I could not just go to "Network' page blah blah" About"page and get the address. I had to actually connect the Ethernet of the ATV in the router and then access the routers GUI to get the Ethernet address and then add this address to the allowed devices and continue with the implementation.

  Once I get it set up when connected via Ethernet and "update" the ATV went to find the MAC address of WIFI and even, it was a bit a task, lol. Of course I had to unplug the Ethernet to find, but when it appeared he ended up at the bottom of the page almost not visible and this page won't let me scroll down to exit the faded area, that is. Incredible. At least, I found and could add to the list of devices 'allowed', lol. Maybe there is an easier way, but I'm not hang something like that every day it's like a new learning experience, whenever I'm helping someone hang one of these devices.

  I could not use my iPhone for the configuration because I needed to add the address ATV4 to the network wifi enabled devices. Also, I could not use the iPhone to the owner because it fell recently and has connection "issues."

  I hung it in the end and work and maybe this can help someone else.

  Does anyone else have experience? Is there an easier way?

  I'm still learnin'

  quick way to disable mac filtering connect and use airport useful app on a computer or ios device to check the mac address and enter him and enable mac filtering, and add address mac

• The printer receives do not all data. It is caused by the MAC address filtering.

  How can I solve this problem.

  The printer attempted to join the network but does not receive any data.  This may be caused by the MAC address filtering. If MAC address filtering is enabled and you want to keep enabled, add the MAC address of your printer in the list of devices allowed for your wireless access point or router before continuing.

  HP Officejet 4500 - G510n wireless all-in-one printer

  Not at all use MAC filtering.  Make sure it is off in your router.

• I don't know how to add additional devices to my list of "trusted devices" in my Apple account.  When I opened my account on Apple using my apple id, I see only my iphone6 listed as a "trusted device";  There is a button to edit, for example. Delete the d

  I don't know how to add additional devices to my list of "trusted devices" in my Apple account.  When I opened my account on Apple using my apple id, I see only my iphone6 listed as a "trusted device";  There is a button to edit, for example. deleting devices, but I can't, or I do not understand how to add my other devices to my approved devices - but is anyone know how to add my Mac and iPad to this list?

  Download a purchase on a device should associate this device with your Apple ID take a look at this.

  View and delete devices in iTunes - Apple Support

• Satellite C850D-104 - change of MAC address

  On the new laptop of C850D-104, I have a problem with the mac address.

  Well well, in short: it changes.

  My firewall filter (also) on the mac address so I need to add the mac address of the new machine.
  Which seemed to work fine until I restarted the laptop warm. No possible connection.

  And looking on the firewall, I see indeed a different mac address attempts to connect.
  To be sure, I restarted again, and yet once again, I get a new address (another).

  Restart IE cold. stop and restart seem to reset the address this is a first.
  And after a warm reboot, the new address.

  Now bypass is simple, do a cold reboot, but it is still annoying.
  On the internet I found some versions of back problems with the netword card driver, but my current license is some versions above that should have solved the problem.

  Any suggestions?

  Hello.
  I had the same problem in a C850-154 (with a Realtek wireless adapter) and the pilot was at the beginning of this year.
  I have updated with the driver of the 14/09/12 (version 2.00.0020) and the problem was solved.

• Mac Pro 2006 update

  Hello!!

  I need to find answers... Have the head to point to operate!

  I realized a Mac Pro in 2006, with 32 GB with a 8800 GT for what I want to install some x 5365 processors who bought, have some videos to see where the process to have him upgrade * Yosemite or the * Capitan.

  But I have another one who is to come up with a former Nvidia 7300 efi and processors equal two, same RAM...

  The question is:

  Can I update the EFI firmware for Mac Pro works with the x 5365, 32 GB of ram and the old Nvidia 7300 with an older operating system how Lion or leopard? Or I have to blink to the graphics card or anything for it to work?

  Any explanation would be very good for me! Already, I'm a little confusedt...

  Much thanks!

  To upgrade the processor on a model 2006 to double processors with four cores, the firmware for Mac Pro 2.1 must be installed. You can not do this for profit, but if you do it for your own pleasure, no one will come after you. Watch on netkas.org for instructions.

  --------

  Do not move mac OS X through each version, except that 10.6.8 includes the Mac App Store, which is the key for all FUTURE versions. There are versions of Mac OS X up to 10.6.3 on DVD. This can be improved using software update to 10.6.8 which adds the Mac App Store. All other upgrades use downloads on the Mac app store in a certain way to get the software, which will be linked to your Apple ID.

  --------

  The original Mac Pro 1.1 and 2.1 of 2006 and 2007 were 32-bit firmware, which supports up to Mac OS X 10.7 without modification. Later, Mac OS X may be supported if you want to bad enough by adding a few hacks and firmware for 64-bit installation that runs to the backend using the 32-bit firmware as a base. It works for these old Macs (not for third party material), and each version of Mac OS X you want install requires re - apply some hacks so he can begin.

  Still, he is an amateur approach interesting, that you can use for your own pleasure. It is not supported by all, and if you encounter a problem, you can debug. Fans of report that it is fairly stable.

  Search for sfott (64 32) for a blog with the discussion of this approach.

• Adding a mac to the eprint app e-mail address

  I tried several times without success to add my mac the eprint application e-mail account so that I can print emails from my iphone to the HP Photosmart 6520.

  Please would you give me clear guidance on how to do this?

  Hello

  Sorry I don't know what you're doing, but printing from iPhone to your printer is very simple because your printer supports AirPrint. Please follow the instructions below:

  http://www.Apple.com/support/iPhone/Assistant/AirPrint/

  Kind regards.

• E3200 and wireless MAC filter will not accept the recent MAC formats

  When I go on the web interface for my Linksys E3200, Wireless > Wireless MAC Filter and try to add the MAC to my new laptop computer to work, the user interface returns an error which is the MAC address in the wrong format. I have triple checked the address and I tried adding several times without success.

  Looking at the address, I'm guessing that the beach is not what the user interface has been programmed to accept because it starts at a much higher range. The first 3 bytes of the MAC address is: 1 c: 3E:84:xx:xx:xx

  My wireless router is E3200 with Firmware Version: 1.0.04)is

  Is there any place on the site Web of Linksys I can drop a ticket?

  Never thought it would be a browser problem. I'll have to keep that in mind.

  The computer I was access to the admin of the router UI wasn't in the wireless MAC filter - highlights the filtering MAC wireless had a list of authorized Mac not refused.

  I think that the problem was because I have 6rd IPv6 configured. Some time after the validation, I needed to update the PPPoE password and got the same error. Disabling (cancellation of the configuration) IPv6 6 Dr allowed me to update the PPPoE password successfully. I've not yet returned and re-activated the MAC filter.

  Thanks for the suggestions!

• Filtering MAC with E4200

  Since I have this router E4200 my sudden network only changes. I have a MAC filtering because I had in my previous WNRL 160N and had no problem but here the night me are 14 I activated the MAC, still put 3 who aren't where I changed the settings wifi network, I put in hidden, change the type of encryption and others and continues to happen randomly , and I added the router directly to the allowed list of Mac. I have remote management disabled in the Cisco Network Magic Mac are not not not because it adds the MAC and I removed some that I put the single.
  Any solution?
  Thank you very much.

  ERTT wrote:

  I did it but at the time, the result is the same .There's 3 MAC I do put noto in the list and they appear automatically.

  Can you identify these MAC addresses? In addition, make sure that the MAC address that you put in is not wireless LAN. If everything seems to be correct. Update the firmware on the router.

• MAC address filtering problem with router DI-624 and printer HP D110

  Just got the wireless D110 printer and cannot connect to the wireless router.

  I have a D - Link DI - 624 Air Plus Xtreme G 2 .4GHz Wireless Router.

  The error message I get from the printer, it's that "address filtering Mac can be activated on your wireless router. This can prevent your HP printer to connect to your network without wire during installation... etc. ".

  The D-Link is configured with WPA - PSK security. If I disable all the security the wireless printer is able to connect. I can't connect the printer to the wireless router with WPA - PSK or WEP same active. There is no connection with the electrician the printer and the router.

  I have connected the router Admin and have repeatedly confirmed that Mac filtering is turned off by going to Advanced Options > Filters > filters Mac > and choose disabled Mac filters. Where is this setting? Why is not able to connect printer?

  In addition, I check the logs on the router and it shows "Wireless PC connected" and "Authentication successful" with a note that has the Mac address of the corresponding hardware address mac hardware of the printer on the wireless network Test report. It seems that the router is to let printing but the printer is not able to communicate for some reason any. It even shows under status > wireless printer is connected.

  When I talked to HP, they said to contact the router company and they couldn't help. When I called D-Link, they said technical support is no longer available for the model. I am stuck, can anyone help?

  Windows XP, tried the front of the printer and USB connection and using the software.

  After a few hours on the phone with the D-Link and HP, the problem has been resolved.

  Apparently, even if that Mac filtering is disabled (set to disabled MAC filters), the Mac address had to enter the router to enable all keeping off Mac filter setting. To me he appeared in the counter intuitive to enter the Mac address, while set to disabled the Mac filter so I wasn't that before picking up the phone with HP. Further on this point, the problem is not going away right after adding the mac address, but rather after the reboot of the router, such as the addition of mac address did not effect, without a reboot of the device.

  HP has been much more useful than a D-Link on it, although it would be nice for HP to add to their instructions and Test report of wireless network to add the Mac address, just in case. I would have tried this step if it has stated that it is acceptable to add the mac address and keep the mac filters disabled.