Add a PowerShell with Kerberos host

Similar Questions

• VSphere Orchestrator (vco) - problem to add a Powershell host

  Hello world

  I am currently set up a VSphere Orchestrator server and I have a few problems to add a new host via WinRM with Add a PowerShell host model.

  I followed this tutorial:

  http://blogs.technet.com/b/meamcs/archive/2012/02/25/how-to-force-WinRM-to-listen-interfaces-over-HTTPS.aspx

  I can connect with Powershell to a second server HTTPS but not with the vco...

  This is my setup:

  PS WSMan:\localhost\Client> winrm get winrm/config
  Config
      MaxEnvelopeSizekb = 500
      MaxTimeoutms = 60000
      MaxBatchItems = 32000
      MaxProviderRequests = 4294967295
      Client
          NetworkDelayms = 5000
          URLPrefix = wsman
          AllowUnencrypted = true
          Auth
              Basic = true
              Digest = true
              Kerberos = true
              Negotiate = true
              Certificate = true
              CredSSP = false
          DefaultPorts
              HTTP = 5985
              HTTPS = 5986
          TrustedHosts
      Service
          RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
          MaxConcurrentOperations = 4294967295
          MaxConcurrentOperationsPerUser = 1500
          EnumerationTimeoutms = 240000
          MaxConnections = 300
          MaxPacketRetrievalTimeSeconds = 120
          AllowUnencrypted = true
          Auth
              Basic = true
              Kerberos = true
              Negotiate = true
              Certificate = false
              CredSSP = false
              CbtHardeningLevel = Relaxed
          DefaultPorts
              HTTP = 5985
              HTTPS = 5986
          IPv4Filter = *
          IPv6Filter = *
          EnableCompatibilityHttpListener = false
          EnableCompatibilityHttpsListener = false
          CertificateThumbprint
          AllowRemoteAccess = true
      Winrs
          AllowRemoteShellAccess = true
          IdleTimeout = 7200000
          MaxConcurrentUsers = 10
          MaxShellRunTime = 2147483647
          MaxProcessesPerShell = 25
          MaxMemoryPerShellMB = 1024
          MaxShellsPerUser = 30
  
  

  PS WSMan:\localhost\Client> winrm enumerate winrm/config/listener
  Listener
      Address = *
      Transport = HTTP
      Port = 5985
      Hostname
      Enabled = true
      URLPrefix = wsman
      CertificateThumbprint
      ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
  
  
  Listener
      Address = *
      Transport = HTTPS
      Port = 5986
      Hostname = host-vsphere.urbanvirtu.local
      Enabled = true
      URLPrefix = wsman
      CertificateThumbprint = 4f00d909810f619876bf5712a22e0fb21382d628
      ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
  
  

  If I try to connect from a second server via Kerberos with HTTPS it works:

  PS C:\Users\Administrator> winrm identify -r:https://host-vsphere.urbanvirtu.local:5986 -a:Kerberos -u:administrator -p:password
  IdentifyResponse
      ProtocolVersion = http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
      ProductVendor = Microsoft Corporation
      ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
      SecurityProfiles
          SecurityProfileName = http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/basic, http://schemas.dmtf.org/
  wbem/wsman/1/wsman/secprofile/https/basic, http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos, h
  ttp://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/https/spnego-kerberos
  

  But with the vco I:

  Name: test

  The Host/IP: Home - vsphere.urbanvirtu.local

  Port: 5986

  Type remote PowerShell: WinRM

  Transport protocol: HTTPS

  Authentication: Kerberos

  Session mode: A shared Session

  User name: administrator

  Password: password

  

  

  Someone has had this problem before? What I did wrong?

  Thanks in advance for your help.

  Best regards

  Jean

  Based on the log, I see that "Connection refused:" error was connected to the kdc parameter in the krb5.conf file and you have already defeated it.

  Now, if I understand 'Add a PowerShell host' the workflow remains in working condition and does not end.

  This behavior I observed in the case of PowerShell plugin 1.0.3 is trying to connect to PowerShell host running PowerShell 4.0.

  Would you please provide version of

  the PowerShell vCO plugin version

  PowerShell host - Windows Version

  PowerShell host - PowerShell version

• Cannot add a host with the host name in VC

  Hi all

  Nice day.

  I just finished the installation of 2 servers esx4.0, Vartual Center Server and domain controller server in my home test harness. I added both the host esx server in DNS records. then I tried to add hosts to VC by using the host name, then I get the error message like

  "Unable to contact the (xxxxx) host specified. "the host may not be available on the network, a network cofiguraion problem can exhist or that management on this host services may not respond.

  I checked that all are ping and found no network configuration problem. I am able to add a host using the IP address, but not with the host name. I checked services in VC, all services run very well. Earlier I never had this problem.

  Please help me if someone has the solution.

  Thanks in advance

  Kind regards

  Suresh

  I would check the article below under additional information

  http://KB.VMware.com/kb/1027672

• To authenticate with Kerberos for TimeMachine on OSX Server

  Hello

  Someone has an idea, how I can use Kerberos to authenticate with the TimeMachine service hosted by a server OSX?

  We use Mac clients in an Active Directory environment. Rules of procedure requires users to change their password after a few weeks. The problem: advertising knows the password, so the OSX Server knows the password, but the customers still have the old password stored in the keychain. So they try to connect to the service time machine with the old and evil, and that powers won't work. With Kerberos, this could be resolved.

  Any ideas?

  We use Mac OS X on the clients and server OSX 5.0.15 10.11.2

  Thank you!

  How to set up Time Machine?  System preferences or via a Configuration profile?  I'm guessing the system preferences.

  Try this command on one of your customers:

  tmutil destinationinfo

  If the value of the URL looks like this:

  AFP://user@host._afpovertcp._tcp.local./TM_Staff/

  Then you connect using Hello and so you're outside the Kerberos realm.  You can try to change the destination of a fully qualified host name or use configuration profiles.  What is the server bound to AD?

  Reid

  Apple Consultants Network

  'El Capitan Server - Foundation Services.

  «El Capitan Server - Collaboration & control»

  'El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Why to the can't 'Shared VMs' does not allow to share folders with the host and why the copy/paste does not work on them? :-((

  I want to put in place a "build mini-server' for our team. Since VMware Player is not taken in charge more I had to use VMware Workstation, and with some success, I put things up. But now more and more surface of trouble!

  To enable auto-start for the virtual machines, they must obviously be "shared." But it looks like, with this, the nuisance that these virtual machines cannot share folders more with the host. And also, it seems that copy and paste does not work with these "shared VMs.

  Is there a work around to get these features also works with 'shared VMs?

  It is VERY annoying and tedious to always have to these VMs to shuttle between shared and non-shared mode just to be able to transfer data or new versions of code for them!

  Thank you for using the workstation. How to create a script with:

  WS t vmrun start "c:\my VMs\myVM.vmx".

  And add the script to the Windows Task Scheduler to run at startup.

• VM with ESX hosts time synchronization

  I have an environment where we hate some vm value Time Sync vm with ESX hosts and on the other not.

  need to write a script to set the synchronization time vm with ESX Yes on all virtual machine hosts in a given cluster

  If you only want the name of the guests, you can add a Select cmdlet at the end

  $vms = Get-Vm | where {(Get-View -Id $_.Id).Config.Tools.SyncTimeWithHost -eq $true} | Select Name
  

• Add bookmark adds the bookmark with incorrect URL

  When I press the star to bookmark add, or click the 'Bookmark this page' it adds a bookmark with the correct favicon, but the URL is to some site randomly in my story and sometimes some website I don't know at all.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• Messaging Instant Lync can be used with the Hosted Exchange mail server?

  Messaging Instant Lync can be used with the Hosted Exchange mail server? Let me rephrase the question. As everyone knows already Lync messenger is used with Office 365, but can be used with the same way hosted exchange server, it is used with Office 365?

  You will find support for MS Lync in these forums-online http://social.technet.microsoft.com/Forums/en-us/category/ocs

• Power CLI script to add multiple VLANs with port group name in an ESX cluster

  Hi all

  Can someone help me get a script adds several VLANs with port group name in an ESX cluster?

  Kind regards

  Suresh

  OK, so you just need to do an Import-Csv inside the loop and change the variables accordingly.

  What is the provision of this CSV file?

• Configuration of the network with several hosts (dVS/EtherChannel)

  Hey,.

  Let's say that there are 4 hosts, each with 2 NETWORK adapter connected to a switch. On the side of ESX, all uplinks are added to a dVS and the port group is set to 'Route based on IP Hash'.

  Host 1 > change of ports 1 and 2

  Host 2 > change ports 3 and 4

  Host 3 > change ports 5 and 6

  Host 4 > change ports 7 and 8

  The switch (Cisco) must be configured as:

  Port channel 1: 1 to 8 Ports

  OR

  
  Port channel 1: 1 and 2 Ports

  Port channel 2: 3 and 4 Ports

  Port channel 3: Ports 5 and 6

  Port Channel 4: 7 and 8 Ports

  Thanks for any help.

  A port for each host channel... This article shows an example with two hosts: example configuration of EtherChannel / switches control protocol LACP (Link Aggregation) with ESXi/ESX and Cisco/HP (1004048)

• -Available with Remove-Host RunAsync?

  Seems to work fine with set-vmhost, but do not know why it seems to be unavailable with remove-host?

  Try like this

  Import-Csv.\$OldvCenters\$Cluster\VMHost.csv | %{

  $esx = get-VMHost-name $_.name

  $esx. ExtenionData.Destroy_Task)

  }

• PowerCLI defining politics NTP to "Start and stop with the host" in ESXi 5

  Would appreciate any help in the definition of the strategy NTP on ESXi 5 hosts 'start and stop with the host. My script is currently using the following:

  Get-VMHost MyEsx | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-policy "automatic."

  This sets up the NTP service in "start automatically if all ports are open and stop when all ports are closed.

  "When I cange to 'MyEsx Get-VMHost | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-political ' market / stop with host"" the following is returned:

  «The possible enumeration values are "auto, On, Off«»»»

  Anyone know of a way (in PowerCLI) of the set up for the 'start and stop with host?

  OK, then you should choose politics "on".

  These are the policy values and what they match.

  

  Like this

  Get-VMHost MyEsx | Get-VMHostService | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy On
  

• Configure the clients to stop with the host

  We use an IBM BladeCenter S chassis with 6 blades ESXi 4 servers in a cluster.  I would like to configure the cluster so that when stop us a host (blade), guests who are running on it will be quit first instead of going down hard.

  I think that this must be configured in Configuration > Virtual Machine Startup / Shutdown, but seem to be the settings I do on the Blade 2, for example a guest so that it starts automatically with the host country, do not apply if the guest is vmotioned to another Blade.

  Is there a way to do this?

  If the host is part of an HA cluster, power on/off options, though configurable, will not work.  However, if you disable HA and then configure the options of start/stop, the settings are configured by VM.  Which means they stick even if vMotioned.

• Guest VM not synchronized with the host

  We have a host of VM Cluster 8 all set to have their time synchronized to the same source NTP.  I checked the time is correct on all of my guests.  1 computer, I put to synchronize with its ' host, one of our domain controllers, is still off in a few minutes.  I changed the time on the NTP source and hosts updated accordingly.  I have to restart the operating system asked for time to resynchronize or do I stop/start the vmtools?  Since it is a domain controller I am wary to do it in the middle of the day, but I'll come on a Thursday night so I can do after hours if this is the solution.

  BTW, I think remember reading an article about hosting Active Directory on a computer virtual de VMWare.  I can't find it now, only the link Ms.

  Lucky you that I still have a copy somewhere on my laptop and I have the gasket for comments. Better is to get VMworld.com if you have an account. I will remove it when you are finished with the download to prevent the issue of copy right.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Where to download the file ZIP ESXi 4.0 for inplaceupgrade with vSphere Host Update Utility

  I'm updating my ESXi ESXi 4 3.5U4 with the Host Update Utility vSpheer.

  But where can I find the ZIP file that is required for the upgrade?

  Can this ZIP file created from the ISO?

  There are only ISO in downloads...

  Kind regards

  Daniel

  It is available here:

  https://www.VMware.com/tryvmware/p/activate.php?p=free-ESXi