Add a simple table without one logical join to another table (OBIEE 10 g)

Similar Questions

• several "logical joins" between a fact table and a dimension table

  It seems that cannot create multiple "logical joins" between a fact table and the table of a dimension in OBIEE with Administration Oracle BI tool. For example, whereas a business model with a dimension table TIMES and has made the table containing the value of START_TIME and END_TIME, we want to create separate logical joins BOTH done for the START_TIMEs and the END_TIMEs? Of course, underlying foreign keys can be created, but as far as I can tell the Administration Oracle BI tool does not support this. The solution would be to reproduce the table in TIME, but it's ugly.
  I'm looking for another approach.

  Try this. Create an alias of two for the TIME dimension (beginning & end) in the physical layer, then remove foreign key to the 'Parent' time dimension. Create the foreign key in the physical layer for new aliases, then create complex joins in the MDB layer for new aliases as well. This will allow you to present the two dates within the same table in the presentation layer. Not a more elegant solution, but it works.

• simple tables

  Hello

  I'm having trouble with this very simple table (which follows). I want to store data across a while loop that's why I tried with a very simple example. And it does not work. The data are erased each time through and I have to define the dimension of the array (100 for example) to get something or my table remains at 0... but I don't know in my VI.

  Thanks for the help!

  

  Since you're using to replace array element the element must exist before the rewrite element.

  Two examples in the shot:

  

  The autoindexing one used above, this has the disadvantage that you don't have the data until the loop is completed.

  Use the bottom adds element notes and feedback from table.

  Tone

• Administration tool of BI - physical foreign key corresponding MDB logical join?

  Hello

  Can anyone explain why when you create a join (physical foreign key) in the physical layer for example

  

  Then view the corresponding logic join in the MDB layer it is the other way round? that is the "one" table in appears on the right and the "an array much ' on the left.

  

  

  It seems fair that logically, I would have expected the "one" table will appear on the left and the "table several" on the right as it does in the physical layer?

  Kind regards

  Tom Rowe

  Hello

  Thanks for your answer Yes, indeed the cardinality is the important thing here, and the query gives the expected results. However also personally find this confusion not to mention that I have since found it also seems to be incompatible, that is. some logical joins are shown round track that I know and others aren't, I redefine the joins that do not have the table 'a' appearing on the left and the "a table much" appearing on the left. This also has the advantage of showing all the table 1 in the form of tables table 2 as fact in the Manager of joint tables and dimension.

  Appears not to be a minor bug / irritation me may therefore raise a SR with Oracle.

  Kind regards

  Tom Rowe.

• How to add the cover sheet without affecting the numbering of the pages?

  No response yet, so maybe I should change the question "Can we add a new section break at the beginning of a document?"

  Or "How do you apply a section on a Master Page break so that when the Master Page is added to the beginning of a document, it does not change the numbering of the pages that follow?"

  Thanks much for any help!

  [INITIAL QUESTION: is it possible to add a cover sheet to an InDesign document without affecting the numbering of existing page?] I have a series of chapters in a book that should be displayed individually and require a cover sheet. Each chapter to start on a recto page, and the page numbering is set with a prefix (the chapter number) and a page number, for example, page 1.1. I can manage to add the map coverage without other brewing pages, but the cover page becomes always page 1.1 and the text begins on page 1.2 (even if it's a front page). Is it possible to do without having to manually reset the numbering of the pages in the Section and Numbering Options window?

  Thanks for any help you can give – many of these documents to work on...  In addition, never submitted a question before, hope I did it correctly!  -JCI]

  Post edited by: J Shee

  Thanks for the reply. I found a different way to keep the pages of shift, but adding that the two pages and then deleting one of them is simpler, thank you!  The numbering of the pages still changes, then perhaps there is no other way than to manually change the numbering and section options afterwards (or writing a script, which is well above my head!). The rats, because I have about 160 of these documents to do. Ah, well!

  Thank you very much, once again!

• Intro to simple photo without thumbnails?

  Hi, I think that this may be so simple that people aren't tutorials on it, but Ive been looking forever. How to make a simple flash without thumbnails slideshow intro? I just want 5 or so photos to do a quick fade fade in, on a loop, contained in a table inside my home page of my site. All the tutorials I've found are for a gallery and thumbnails. I want something like this: www.halebob.com. Your help would be greatly appreciated!

  You can create a slide show basis without code to import the images in the library, converting them to symbols and then add them to the timeline sequencially.  Here is a link to a tutorial...

  http://www.freeadobeflashtutorials.com/picture-Rotator-slideshow/

  If you use Google, you are likely to find more.

• How to add music to iTunes without copying the music files

  How to add music to iTunes without music copied to an iTunes Media folder or anywhere else?

  I read the answer is to go into the advanced settings and uncheck "Copy files to iTunes Media when adding to library". Which is excellent and this option is not checked, but iTunes keep copy of the music into an iTunes Media folder...

  Anything ripped CD, converted, downloaded from the iTunes Store or added via the automatically add to iTunes folder will eventually iTunes Media. If you add a folder of files stored outside the media folder and the option is disabled, then iTunes should not be generating copies in the media folder. Can you describe a specific example where you can see the new arrival before and after importation?

  As a backup to one side and the migration of an iTunes library is much easier if all the content is organized inside the iTunes Media folder, but this is no reason not to try and find out why things are not behave correctly for you now.

  TT2

• Add a new table to the server ESXi 4.1

  Hello

  I try to add a new table on a server ESXi 4.1.0. Is it possible to build the table and add it without restarting the host? The server is an HP ML350 G5. I installed ESXi 4.1 on a hard drive, but I did not install HP driver packages. Is there something I could install from ESXi that would give me the features of configuration of the berries, etc. ?

  Thanks for any help,

  Stem

  Although it is possible (but unsupported) to install tools RIAD on ESXi (see VMware experience before: how to run the CLI of the ACU online HP for Linux in ESXi 4.x) you might have to restart the host still. Reading messages earlier, it would be also better to add the new table by using the ACU (Array Configuration Utility) rather than the ORCA (Option ROM Configuration for arrays). Of these posts, it looks like ORCA could possibly reorganize RAID sets, resulting in a non bootable host.

  André

• Simple table - best way to create in the Muse?

  Hello

  I want to insert a simple table into a page in Muse.  This is an Excel spreadsheet with 6 rows and 4 columns.  It seems that I can select the cells in Excel, copy and paste in Muse.  I can also create the table directly in Muse using text boxes with striped borders - easy since my table is so small.  I read the posts here on the use of object and place, but I don't know that I need it.  I didn't need the ability to modify the data of Muse.

  My question is this: what is the best way to create a simple table in Muse?

  Thank you.

  John

  Hello

  This really depends on your preferences as well as the specific features of the table that you want to create. In your case, because the table is simple and does not need to be edited, it may be more simple create the table using text boxes and stroked the borders in muse (as you already have) you don't need to use more than one program.

  However, have you ever needed the ability to modify your tables, your best bet is to integrate the HTML code in Muse. You can do this with a table in Excel:

  What are the exact steps to get an array of Exel to Muse.

  Or create the table using a HTML generator:

  HTML - TablesGenerator.com table generator

  No option requires no knowledge of HTML. I hope this helps!

• is it possible to have all my anti virus/malware programs to all work together without one stop on the other?

  is it possible to have all my anti virus/malware programs to all work together without one stop on the other?

  is it possible to have all my anti virus/malware programs to all work together without one stop on the other?

  I doubt it.

  You should never have more than one security product installed on the PC, providing active protection / scan. This can cause performance problems, system instability and conflicts between programs and can affect all installed antivirus product efficiency. Even if you try to have more than one product installed, with an asset and another disabled, disabled product will probably still active components and/or installation of the drivers installed that will conflict with any other antivirus program.

• My one year contract is about to expire. Can I extend the same price for two months and cancel the contract without redoing the accession of another full year?

  My one year contract is about to expire. Can I extend the same price for two months and cancel the contract without redoing the accession of another full year?

  Hello

  The plan of photography is an annual plan therefore would renew for another 12 months.

  Under the terms of subscription, an early termination fee would be applied if you have decided to cancel two months in the new contract - Adobe - General conditions of subscription

  Fill the cloud creative and plans unique app are available on a monthly basis, which can be another option - https://creative.adobe.com/plans

  Kind regards

  Bev

• Add new metadata tables

  Hello, I added a new table in the map just to store new data produced a count function. Can you tell me how to add this table to the metadata?
  
  I added my source tables, which are under the module ODBC, metadata with the metadata Wizard. But I do not know how to add this new table. If anyone can help me. Thank you.

  Try to right click on the table in your map, and then choose "synchronize". In the resulting interface be sure to choose «Outgoing...» "under your Direction of synchronization. This will create a table in your metadata.

  Kind regards
  Eric.

  Published by: Eric Buddelmeijer on April 4, 2013 17:14

• How can add a simple search engine at the top of my page

  I have been asked by a number of customers to add a simple 'search site' window on their home pages. How this is done?

  This is what you need

  Here, you will know how it works

  http://www.Muse-themes.com/blogs/News/7722357-Embedding-a-Search-Bar-in-Adobe-Muse-Google-custom search

• Add a new table and identification number must be advised

  Hi all

  When I click on Add button, just copy the existing table to a new table.  I wouldl like to advised the Identification number when I select Add a new table.
  for example
  (the default number is 1 - column 2
  Identification number is 2 - column 3

  When I select Add button to add a new table the ID in column 2 is 3; and the
  column 3 is 4; and so on.

  I had worked several days but it failed.  Help, please.

  Thanks in advance.

  Here is the link.  It is easy for you to review what I did.

  https://Acrobat.com/#d=upe2RCZPJ * CGIpzpLVS9hQ

  Cindy

  Hello

  in the first column, modify the script to:

  Concat ("LOCATION", 1 + (2 * this.parent.parent.index))

  and in the second column in:

  Concat ("LOCATION", 2 + (2 * this.parent.parent.index))

• How to add a simple sign-in password?

  I would like to add a simple sign-in password so that users to access a non-public page on a site. I'm a litle confused as to exactly how to do this and also wonder if it is possible to have just a password field but not username?

  Thank you

  John

  Ask your host if they will help you set up a password protected directory.  Then you can just put your page in this folder...