Add HKLM key during installation MSI for tracing

Similar Questions

• Latest installer .msi for Skype

  I'd appreciate it if someone could please send me a download for the latest installer .msi for Skype.

  Thanks and regards, Roy

  The latest version can be downloaded here:

  6.16 Skype

  http://download.Skype.com/MSI/SkypeSetup_6.16.0.105.msi

• V.2002 of MS Windows XP Pro SP2 OEM from Newegg in 2006 would not agree on shrinkwrap product key during installation

  I bought v.2002 of MS Windows XP Pro SP2 OEM from Newegg in 2006.  She would never accept the product key during the installation on his blister.  To complete the installation, I used a different key of a second OEM disk, and it worked.  It's been a while since I installed XP; but I was working on this computer lately and realized I never knew why the CD has had this problem or how to fix it.  I have 3 questions.  #1: the key on the blister does not match the key in "unattended installation. TXT "; is this normal?  #2: the key in "unattended installation. TXT doesn't work anymore.  #3.   Any ideas on this subject?  Thank you, Jeff.

  The only thing I can think is that you were consistantly entered a bad key - it's almost unknown fo that there is to be a wrong key on the label and it is much more likely to be a case of misreading of the key, which is not easily read in the best of light (which is why I often use a torch and a magnifying glass).

  I guess it's vaguely possible that this is a substituted forgery (some thieves employee pirateshave shoplifter and employees take to counterfeit and bring out the true copies).

  I'm surprised that the other has worked, if it had already been installed on another PC - they are locked for the life of the first motherboard on which they are enabled.

  The key in the file 'unattend.txt' is a dummy - it cannot be enabled and is not normally get used except in the OPK.

• Photosmart 2610xi: cannot create key during installation

  I tried to install my photosmart 2610 xi on my windows 7 64 bit desktop, but a fatal error occurred during installation

  Could not create key: \Software\Microsoft\Internet Explorer\Explorer {555D4D79-4BD2-4094-A395-CFC534424A05} Bars\. Make sure you have sufficeinet access to that key or contact your support team

  I tried all the steps in the generated after that fatal error log, but nothing helped. The last option is to contact support. Any help will be greatly appreciated

  Thank you

  Finally managed to do work!

  Decided to install to use internet explore rather than google chrome since the error msg says, msn, internet Explorer so I thought to give it a try and this is... Thanks for the help

• F4180 - fatal error during installation - MSI.dot4wrp40 on Windows 7

  What is the latest tips or help on the installation of an all-in-one HP F4180 device software.

  2 days ago, I bought an HP computer brand new that works under Windows 7 64-bit. It is essentially provided although I uninstalled Norton and installed Microsoft Security essentials. I am now trying to move on from my old XP computer devices and I stuck F4180 all-in-one printer, scanner, copier...

  I didy plug my F4180 on the new computer. He downloaded the drivers and I can print. However when I just then try to install the full software on your Windows 7 Web site that would allow me to use the scanner, then I get a 'fatal error' and reference MSI.dot4wrp40. When I look further into the details, I see that the installation has no "windows that install Service could not be accessed. MSIInstall failure of 1603.

  Since then I unplugged the device, run the uninstall_L2 and the uninstall_L3 from the ccc directory. Looking for a hpzsetup.exe.txt to rename (not found), looked for the two files (another article on the forums) and those not found. I applied the patch from HP for the upgrade of Vista and run it with no visible effect, I found a file called twainfix.exe and run that, once more with no visible effect. I am full of ideas.

  Neil

  Just to close this thread. I contacted HP Support andthey suggests stuff that I had already tried. However, I noticed that my system was not updated Office Service Pack 1. Windows Update failed to apply the service pack. I downloaded Office 2007 SP2 and installed myself. This installation has failed, but when I started the software, it says that it's SP2. I ran Windows Update again, and she observes a load more fixes for Office 2007. I got him to do the updates and failures. However, I "tried again" and suddenly they were gone, as if it was assigned and when I ran Windows Update again, there was nothing to apply. Everything has been installed.

• PhotoSmart C6280 - fatal error during Installation

  I have Win 7 (64-bit) system and can not install the software for my C6280 all-in-One Printer.  I get a message "Fatal error during Installation" and then the software tries to uninstall.  During this process, a reboot is required and then the software tries to install again and it fails.  I'm in a circle without end of the installation-uninstall-install-uninstall...

  How to do this?  I want to uninstall completely all the software associated with this printer and then start over from the beginning.

  The issue that brought this situation was that I was getting the following message is displayed when starting:

  "There was a problem starting C:\users\Myron\AppData\Local\IsolatedStorage\HP\zelqof.dll.

  The specified module could not be found. »

  I guess the missing module would settle if I re - install all software associated with the printer as it is ONLY connected printer (USB) to the PC.

  Hello BigDog5280,

  Welcome to the HP Forums.

  I see that you have a problem with a loop uninstall/reinstall the software and drivers.

  If you have Norton 360 installed, please disable it and restart the computer.  When the computer is back on, try to reinstall with Norton 360 always off.

  Here is a link to a document that is on a Fatal Error ' error 1603. A fatal error occurred during installation "(MSI erreur 1603) poster in HP Software Installation in Windows "

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• Install RMS 13.1 how to add limits given in the ddl for UK files?

  Hello gurus, the retail
  I installed RMS 13.1 without running the partition.ksh script during installation detail for RMS database and it has created some examples of data too, I saw the Guide installation and especially watched the stages of partitioning in the Guide, can someone give a hint, how the data limits are changed in the ddl for UK files? Since I'm a DBA, I'm a little confused, where to get this data? as the installation guide mentions that the RMS_partition_defintion.xls has modified and used for installation of production combined with partition_attributes.cfg for a production facility.
  Thanks in advance
  -Vivek

  Hi Vivek,
  Let's see...

  UK means United Kingdom of great brittain? I think that there is no UK specific DDL instructions associated with RMS.

  If you look at the Installer (unzip the zip to edelivery.oracle.com for example RMS 13.1), order folders

  V16908-01\rms_13.1_install\rms13dbschema\rms\dbschema\dbscripts_rms\examples\part
  V16908-01\rms_13.1_install\rms13dbschema\rms\dbschema\dbscripts_rms\ddl\part

  This package contains a ksh script which is driven by a script configuration and some lists of specific partitions in the data_def folder.
  This script partition.ksh can recreate DOF to other unpartitioned tables to partitioned.

  The XLS file mentioned also in this file and helps defining the number of partitions and make one or for example multidimensional (e.g. range/hash).

  The whole process is explained in a lot of details in the last chapter of the guide to implementation of goods merch-131 - impg.pdf.

  When your system already contains data, this should be saved and re-established.

  Note that indexes on partitioned tables may need too many partitioning, it takes at least some reflection on this and AFAIK the RMS installation program tries to respond to this also.

  Best regards
  Erik Ykema

  Published by: ErikYkema on October 29, 2010 08:05

• ERROR:-1603 FATAL INSTALLATION ERROR. Consult the help of Windows Installer (Msi.chm) or MSDN for more information.

  I try to install the Microsoft Flight Simulator X game
  but I get the error message
  "ERROR:-1603 FATAL INSTALLATION ERROR.
  Get help with Windows Installer (Msi.chm) or MSDN
  For more information. »
  Can someone help me on this? I am using Windows XP Pro.

  Hello

  Can I know the computer brand and model?

  I suggest you follow these methods and check.

  Method 1: has access the below link and follow the steps mentioned and check.

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

  Method 2: Refer to the following article and try the steps.

  Error message when you install a Microsoft game or a mapping program http://support.Microsoft.com/kb/258496

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!

• Could not find an installation package for the product TrayApp. Try installation using a valid copy of the installation package for TrayApp.msi.

  Yesterday I uninstall a program, the Zynga toolbar and which has not, I lost a google toolbar. I then tried to perform a restore, and that's when I started getting the TrayApp message. Also, I tried to do a restore on my external hard drive device, and that did not help either. The date on the external hard drive was 18/02/2011.

  The google toolbar is active it is not displayed any longer.

  Hello

  "a valid copy of the installation package for TrayApp.msi.

  This is normally a problem with your HP printing software

  Uninstall and reinstall the printer

  and try this

  http://www.ehow.com/how_5269744_remove-trayappmsi.html

  Contact HP support

  http://welcome.HP.com/country/us/en/contact_us.html

  HP support forums

  http://h30434.www3.HP.com/

  follow these steps

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black

  I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black, the upper band has Taylor Swift and a few small icons to the bottom of the page. If I type Perry Como, in the search box, the page does not change.

  lysdexic01, I know almost exactly what you describe on my screen of iTunes Store recently updated for Windows 7 64-bit. Only difference is that the icons in the black box are invisible until I move the mouse above them, their location by trial and error. Once activated, the icon remains visible. Each found icon flickers at first, but stops flashing if I pass the mouse over it.

  I think that the store is now functional and useless for those of us experiencing this problem. Other users have reported that their iTunes store screen flickers since they updated iTunes to the latest version, but most did not mention the area big black screen that you and I see.

  So far, Apple seems not to believe that there is a problem with the software to update iTunes. It is therefore important that users continue to report these problems to Apple that there are enough complaints for attention even during a week of office party.

• Patch for KB2545850 hangs during installation on Windows Server 2008 R2 Standard 64-bit

  Hello

  I have a server with the issue detailed in KB2545850.  I downloaded the fix Fix370193 (https://support.microsoft.com/en-us/hotfix/kbhotfix?kbnum=2545850&kbln=en-us) and tried to install it but it seems to just hang during installation.

  I tried several times and it fails every time.  No errors are displayed or saved, he's right there with the display of progress bar.  The Cancel button does not cancel.

  Restart the server results it starts successfully and I had to go back to a snapshot.

  I tried to let the software update apply for 16 hours with no luck.  Someone has seen something like this before?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code

  FixIt, reboot, try again not useful

  How can I get the security properly installed?  or what happens if I don't?

  Original title: 0x8007F0F04

  Hello

  1. what day you're talking about?

  2. what Microsoft fixit you talking?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/958051

• I am trying to load XP Pro SP2 as the key on the bottom of the system says xp pro. But during installation it says the key is invalid? How can I fix?

  Invalid product key?

  I have an old laptop that I am donating to a charity.  I try to load XP Pro SP2 above, because the key on the bottom says xp pro.  But during installation it says the key is invalid?  How can I fix?

  It is possible that you will need to a disk with SP3 slipstreamed in there - much SP3 keys are a new slice that has been issued and is not recognized by the previous discs.

  Your machone specifies a level of SP? What is the brand / the exact model?

• How to create a shortcut for all users during installation

  Hi people,

  We have a desktop application that is distributed with Java Webstart and works on Win7 machines. Initially, users all connected using a connection by default, so creating shortcuts was not a problem. Now, because of new networking strategies, each user has his own connection.

  The problem is that the shortcut to the application is created in the user profile (for example "C:\Users\JohnDoe\", so that other users in the same machine can not run the application unless he or she installs the application again.)

  Is there a way to create this shortcut for all users using JNLP API or configuration in the xml file?

  If anyone has need of the solution: during installation I save the jnlp file in a directory accessible to all the world and then start the application using "javaws path\to\file.jnlp". More details in How to create a shortcut for java webstart available for all users on Windows 7?-stack overflow

• during installation it asks usename proxy and password for authentication. What should I fill in here?

  during installation it asks proxy username and password for authentication. What should I fill in here?

  Hello

  Please see Support of Proxy in creative cloud products

  Kind regards

  Sheena