Add lines to the slot table with apex_item.checkbox form?
HelloI created a data manipulation process to add a line in a tabular presentation. The problem is that I have a few boxes and when I click on the button to call the procedure for adding line is not
create one of the only text fields. Is anyway for me to create the checkboxes in this way?
Thanks in advance!
Hello
Take a look on Re: Add a line in the detail table when the checkbox is enabled on a table of master report clone an entire line so it should include check boxes. Just make sure that ypu run updateInputs() or something similar to make sure that all the boxes have unique attributes "name".
Andy
Tags: Database
Similar Questions
-
Mr President
My worm Jdev is 12.2.1.
I have master tables / details.
I have 2 lines for each PRIMARY KEY = ("VID", "LINEITEM") as below in the Details table.
Please help how to get a button on a jsf page to remove these two lines at a time.
Concerning
So, in your app (data model) module, you have a master relationship / typical retail:
And the relationship between them is based on some ViewLink
Now go to the ViewLink, relationship, accessor.
Take a look at the Destination accessor.
Generate accessor object to check and give a name Acessor
Then go to the master VO, Java and Include accessor, the class generate a display line:
Go to the class view Java generated line, you'll find a method with the name of the accessor of the previous step, in the form of:
public RowIterator getYourDetails...or_whaterever_IsAccessorName..() { }
Now, in the same Java class, write the following Java method:
public void removeDetails(){ RowIterator details = getYourDetails...or_whaterever_IsAccessorName..(); // it is RowIterator over all details Row r = details.first(); while (r != null) { r.remove(); r = details.next(); } }
This method on the Cilent export line Interface:
Finally, pass the data controls and drop this operation on the form as a button...
-
Copy a line in the same table with most original values
Hello experts SQL, I hope you can help me. Forgive me if this topic has already been answered and posted but I couldn't find.
I need to copy thousands of rows in a table to itself (table). The goal is to insert/add a new line of effdt for non-respondents according to a recent study. I get the old ' ORA-00001: unique constraint "error when I try to run sql. If I specify a value for one of the key fields, emplid, it's not a problem, but I can't specify the values 4 000 + in my sql.
Could you please give me advice on how to achieve this? Your help is greatly appreciated. Here is my SQL test that does not work:
INSERT INTO pers_data_usa has
(effdt, emplid, MILITARY_STATUS, US_WORK_ELIGIBILTY,
CITIZEN_PROOF1, CITIZEN_PROOF2, MEDICARE_ENTLD_DT)
SELECT EFFDT, B.emplid, TO_DATE(SYSDATE,'DD/MON/YYYY')
'1', 'Y', B.CITIZEN_PROOF1, B.CITIZEN_PROOF2, B.MEDICARE_ENTLD_DT
OF pers_data_usa B, pers_data_usa A
WHERE A.EMPLID = B.emplid
AND A.EFFDT <>SYSDATE
ORA-00001: unique constraint (SCHEMA. PERS_DATA_USA)
When I put the values in emplid, the line is created. There is a unique constraint on the emplid for non-null and it is a key field.
Thanks in advance for your answers and review... JasonWhat is the unique constraint that is violated, said the? (Is the name of the constraint really the same as the name of the table?) One or more of the lines that you want to copy probably already has a corresponding row in the table that violates the uniqueness constraint.
If it is an array of PeopleSoft delivered, shouldn't use you PeopleSoft APIs to change the data? Unless you are absolutely certain you know all tables in PeopleSoft that potentially makes reference to this table, directly modify the data tends to cause a lot of headaches down the line.
Justin
-
How to add new features to the line in the nested table advace?
Hello
I want to create a new line in the nested table advance.
Help, please.
Thank you
Hello
Use the code below to add a line in the nested Table.
If (PageContext.GetParameter ("addRows")! = null) {}
OAAdvancedTableBean sectionsTable = (OAAdvancedTableBean) webBean.findChildRecursive ("AdvTblRN");
OAInnerDataObjectEnumerator sectionsEnum = new OAInnerDataObjectEnumerator (pageContext, sectionsTable);
{while (sectionsEnum.hasMoreElements ())}
Set of rows sectionsRowSet = sectionsEnum.nextElement () (set of lines);
for (int i = 0; i)< 1;="">
NewRow = sectionsRowSet.createRow ((OARow)) OARow;
sectionsRowSet.insertRowAtRangeIndex (sectionsRowSet.getRowCount (), newRow);
}
}
Thank you
Dilip
-
making line for the current line on the expansion table
Hello
I use JDeveloper 11.1.1.5.0
I have a table with facet detailstamp enabled. Each line is to have an arrow icon to expand this line.
My problem is that line expand action seem to work independently with the selection of rows in the table. When I develop a line, it does not only rank as current. I tried with the code below to make the line of the current table, but could not do.
Please let me how can know I do the table row under the current name on the expansion of this line.public void makeCurrentRow(RowDisclosureEvent rowDisclosureEvent) { usersTable = (RichTable)(rowDisclosureEvent.getSource()); //usersTable is the binding of the table on the page RowKeySet discloseRowKeySet = usersTable.getDisclosedRowKeys(); usersTable.setSelectedRowKeys(discloseRowKeySet); AdfFacesContext.getCurrentInstance().addPartialTarget(usersTable); }
Kind regards
FoxI implemented a sample here http://tompeez.wordpress.com/2013/04/12/make-disclosed-row-the-current-row-when-using-a-detail-facet-of-a-table/
Timo
-
Add lines to the query result?
Is it possible to add lines to the result of a shutdown of the SQL query, similar to the CALCULATION command in SQL * more?
In other words, for example, when A column value changes, add a line after the previous line (the last one before changing the column A) to display the sum of the values in column B.
for example
< PRE > A and B
- --
1 3
1 4
1 5
12
2 9
2 1
2-7
1 < / PRE >SQL> create table sales (person,city,sales) 2 as 3 select 'Alice', 'Phoenix', 19 from dual union all 4 select 'Alice', 'Tulsa', 11 from dual union all 5 select 'Bob', 'Phoenix', 17 from dual union all 6 select 'Bob', 'Tulsa', 9 from dual union all 7 select 'Tony', 'Miami', 5 from dual union all 8 select 'Tony', 'San Francisco', 4 from dual union all 9 select 'Tony', 'San Francisco', 3 from dual 10 / Tabel is aangemaakt. SQL> select case grouping_id(person,city,rowid) 2 when 1 then 'Sub-Total for' 3 when 3 then 'Sub-Total for' 4 when 7 then 'Grand Total' 5 end notes 6 , person 7 , city 8 , sum(sales) sales 9 from sales 10 group by rollup(person,city,rowid) 11 having grouping_id(city,rowid) != 1 12 or count(*) > 1 13 order by person 14 , city 15 , grouping(rowid) 16 / NOTES PERSO CITY SALES ------------- ----- ------------- ---------- Alice Phoenix 19 Alice Tulsa 11 Sub-Total for Alice 30 Bob Phoenix 17 Bob Tulsa 9 Sub-Total for Bob 26 Tony Miami 5 Tony San Francisco 4 Tony San Francisco 3 Sub-Total for Tony San Francisco 7 Sub-Total for Tony 12 Grand Total 68 12 rijen zijn geselecteerd.
Kind regards
Rob. -
I wrote a stored procedure in our custom schema. I have granted rights of running APPS to it. When put in a concurrent program I get this message and it will not even start running. I'm under the it the purchase of Super user
APP-FND-00874: Routine FDFBDF found no line in the FND_DESCRIPTIVE_FLEXS table
So I created 2 exactly stored procedures as below but different name. I put one in our custom schema and the other in the scheme of the APPS and I still get the same error message.
create or replace
PROCEDURE TESTPROCEDURE1 (errbuf OUT VARCHAR2, OUT VARCHAR2 retcode) HAVE
BEGIN
NULL;
END TESTPROCEDURE1;
Was that there was a control on behalf of the simultaneous request character and, possibly, the short name. It was not visible until I stuck in another application.
Thank you for all your help.
-
view multiple lines in the advanced table
Hi all
I have a requirement. I created advancedtable. When the page loads, to display 4 rows at a time. Can anyone please help how to achieve this req
Kind regards
MuraliHello
Write the code below in AM that will create 5 blank lines in the advanced table.
xxVOImpl voImpl = getxxLineVO1();
voImpl.setWhereClause ("1 = 2");
voImpl.executeQuery ();
for (int i = 1; i)<=5>=5>
{
Line = voImpl.createRow ();
voImpl.insertRow (row);
row.setNewRowState (Row.STATUS_INITIALIZED);
row.setAttribute ("column1", i);
row.setAttribute ("column2", "XYZ");
}Kind regards
Mary -
Restore the value of the selected line in the editable Table.
Hello, I use Jdeveloper 11.1.2.1.0.
My problem is:
1. Select a line in the editable table.
2. change the value inside elements of the af:inputText of columns.
3. tap on restore.
4. the values of the selected line remains the same.
If I select another line, before the restore, the restore will work as expected.
I want to when you press the button cancel the values of the selected row to be rollback-ed as well.Set the immediate on all the inputTextFields in the table and it worked.
Thank you.
-
Is it possible to alternate the color of the lines of the ADF table? Do I have to use a skin?
Code example would be much appreciated.
Thank you, MitchRead about the line of the bands here:
http://download.Oracle.com/docs/CD/E12839_01/apirefs.1111/e12419/tagdoc/af_table.html
Basically, you can use the rowBandingInterval attribute. -
OWB, I need to update the target table with the same field for game/update
OWb, I try to update the target table with the game and the update on the same ground is this possible. I'm a match merge error indicating that you cannot update and match on the same ground. But in SQl is my selection
Update table
define RFID = 0
where RFID = 1
and ID_processus = 'TEST '.
Can HWO I do this in OWB.I have check but in the case later (last one) that he warns no error if you can go with it.
and I tested it it worksYou can check the first case (from where we start) if it has been warned and then try to run.
-
Add the line in the advanced table
Hello
I need to create a line while click on the button Add another in a table.
Can any body help on this.
Kind regards
VincentHi Vincent,.
You can do this using a declarative approach or through coding.
Here are two ways I want to say. You can use an any of them.
To create a new line in advancedTable, you have two options.First of all is to click with the right button on advancedTable--> New--> the foot of page
Now right-click on tableFooter1--> New--> addTableRow
Set the following properties for addTableRow1
Add labels to lines: Adding line
To add line: 1
Insert automatically the lines: trueSecond option is to create a "submit" button and in the method of construction of the controller use code below.
' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
{
super.processFormRequest (pageContext, webBean);
If (pageContext.getParameter ('ID of the button send Add row')! = null)
{
OAApplicationModule am = pageContext.getApplicationModule (webBean);
OAViewObject vo = (OAViewObject) am.findViewObject ("VO Instance name");
If (vo! = null)
{
VO. Last();
VO. Next();
Line = vo.createRow ();
vo.insertRow (row);
row.setNewRowState ((byte) - 1);
}
}
}Kind regards
Works -
Add ToolTip to the line of the selected table
Hi all
I would like to add a ToolTip to a selected line to display by hovering or clicking on a line. Wondering if someone could point me to the documentation on how to do it. I was able to add a ScreenTip to a table column header, but I would like to as that is more dynamic and change based on the line currently being flown (for example display an information column field of a line that is currently be flown over).
Any help is appreciated,
WraithHello
Hope useful suite -
Copy a few lines in the same table, but with different IDS
Hi all
I had this problem... I have a table with its pk (which is a sequence). With a statement select, I extract a few lines, and then I would record in the same table, but with IDS different (obviously eheheh).
I don't know how to do...
Thks for all help ;)
p.s. I want to change some fields in lines before saving as well... don't know how do it more...
example:
ID NAME TYPE
1 ferrari car
2 cars lamborghini
I'm trying to copy the second and changing its type in "BMW".
I could result:
1 ferrari car
2 cars lamborghini
3 bmw cars
Thank youAssuming that your table is named cars_tb and the cars_seq of the sequence.
insert into cars_tb select cars_seq.nextval, name, type from cars_tb
This would overlap with any existing lines, but with a new id.
If you want to duplicate a specific line and change a value, you could do something like:
insert into cars_tb select cars_seq.nextval, name, 'BMW' from cars_tb where type = 'lamborghini'
or better, use the PK
insert into cars_tb select cars_seq.nextval, name, 'BMW' from cars_tb where id = 2
-
Add lines to the table of results
Hi all
A table of results page updated, I have one called submitButton 'Add' to add rows at the bottom of the table to create a new record.
Wrote a method create in AM, but it's always add a new line to the second last position.
How to add a new line to the table after the last record?
Thank you and best regards,
PatriciaIn your method of AM
You can use following code in AM
VORowImpl row = (VORowImpl)vo.last(); vo.setCurrentRow(row); vo.next(); VORowImpl newrow = (VORowImpl)vo.createRow(); vo.insertRow(newrow);
I hope that helps!
Thank you
AJ
Maybe you are looking for
-
WPF chart - select a horizontal range
Hello I use the chart WPF of MS2015, I want to allow the selection of a range of horizontal (without zoom) so that the user can see the selected range. 1. How do I allow to select the horizontal range in the chart? 2. the data graphic is ChartCollect
-
Case of Structure with three cases and a tolerance
Hi all I have a variable tension that I will be integrated in a housing structure. Is it possible to put in place the structure case as follows. If input case is between 1,238 and 1.242, out = RIGHT If the case entry is less than 1,238, left = LEFT I
-
"socket error". When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error? It keeps happening to me on this si
-
Notification bar opens with just a tap?
I noticed the notification area, particularly when you slide down, even in the House for example. Notification are very sensitive to the difference in the iphone, the notification must be slide of course.Please have a solution for this... Thank youTh
-
Will not work my Office Gadets, any ideas on how to fix?
Will not work my Office Gadets, any ideas on how to fix?