Add multiple pages to the numbers.

Similar Questions

• 4655 HP Office Jet: How can I fax multiple pages using the hp officejet 4500 desktop computer

  How can I fax multiple pages using the hp officejet 4500 desktop that you just bought

  can you please email me at [removed personal information]

• Scan multiple pages in the same file on the computer

  How can I scan multiple pages on the same computer file on my HP Officejet Pro 8600 Plus?  Currently, it will scan each page to a separate computer file only.  Scan a document and then when asked if I want to scan another page I say Yes and the scanner.  However, they still attend separate computer files.

  Thank you!

  Thank you very much!

• OfficeJet Pro 8000 prints multiple pages of the same document

  Info:

  HP Officejet Pro 8000 A809a

  Windows 7 Pro 64-bit

  Last driver and firmware from HP

  When a job is sent to the printer (web, Word, Acrobat, etc.) the printer keeps printing multiple pages of the document.  Sometimes it will print the first page and a second partial page, then it reprinted again and stop at the same place on the partial page.  She does over and over again.  I ran the HP Diagnostic Utility and it was impossible to print a test page, even after turning the power on power off, then on.   Any suggestions, or is * another * bad printer?  The first was sent and replaced, so I think that this model is just a lemon.

  Thanks for the suggestion, but it didn't work.  I tried to reinstall the driver altogether package three times with no result.  I ran the utility programs that supposedly allows you to solve problems, but public services could not even to generate a test page.

  It seems that I finally found a solution, however.  I installed an older driver for MS Vista 64-bit, and that seemed to do the trick.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• How can I view multiple pages of the internet on my screen at the same time?

  Hello

  I am not very computer, please bear with me.

  On my old laptop which has Windows XP, I used to be able to open and view multiple pages of the internet (by reducing the size of the pages) at the same time, now that I have Windows 7, I can't seem to open several pages on the screen at the same time. Please can someone advise me,.

  Thanks for any help

  Rita

  Hi Rita,.

  Assuming you are using Internet Explorer (IE) try this:
  • Open IE and go to the site that you want to display as you normally would.
  • Look in the upper right, next to the red X, there is a button that looks like two boxes in front of the other - it's restore down. Click on it and your IE window should shrink.
  • You can change the size of this window by pointing the mouse on the edges until it becomes double ended arrow, and then clicking on, now and making drag and drop your window screen by clicking on, hold and drag in the top bar.
  • Once you have it where you want that it and the size that you want, click on FILE > new window, or press CTRL + N.
  • This will open a new window of the same size on the same Web page, which you can then drag it where you want.
  • Repeat until you have enough windows IE open to do what you need.
  • When you are finished, right-click on the stack of icons of EI on the toolbar at the bottom and click "close all windows".

  If you use Chrome, it's more or less the same. MENU > new window or CTRL + N
  Have fun!

• Add multiple attributes to the element via the conversion table?

  Hello...

  I'm sure I know the answer to this question, but am looking for validation.

  Is it possible to add multiple values of the attribute to an element using a conversion table? Table following conversion creates the < some-elem > element with the attribute @attrname to "attrval"... but what happens if I wanted to put two attributes? I tried this... Some-elem [attrname = "attrval"] [otherattrname = "attrval2"]... but the second definition is ignored. Is it possible to do (with conversion tables)?

  Wrap this object	This element of	With this qualifier
  P: some-para-tag	Some-elem [attrname = "attrval"]

  Thank you!

  .. .Scott

  Scott,

  The structured reference apps said to separate assignments of two attribute with an ampersand, as in

  Some-elem [atttrname = "attrval" & otherattrname = "attrval2"]

  I've never done, so it is not tested.

  Van

• By clicking on the button Add a Page removes the data of the initial page.

  I have a button Add a Page on the first page. I enter my first page of information. When I click on the button Add a Page, a new page (page 2) is added, but the information that I entered the first page disappears. I have attached the form that I'm struggling with. Any help would be appreciated!

  Changed your samples to make it work.

  1. to the subform Page 2, you must set the minsize as 0, themaxsize to 1, and the initial counter to 0. By doing this there is no addressable object to the script against.

  2. in the code that adds the page, you have a command:

  Form1. Page2.InstanceManager.addInstance)

  As it is has no present subforms to Page2, you get an error on the object existing do not. The Page2 object does not exist so that you can not call the instanceManager. So, you should use a different rating to reach the instanceManager. In this case you vcan use notation of underscore (_) to access the instanceManager to an object that is not yet part of the provision. So, your order will be:

  Form1._Page2.addInstance ().

  3. you can disable the button after they add the second page as well as position the cursor in the 1st field on the next page. To do this, you can add this code:

  xfa.host.setFocus (Page2.Table1.Row2.Action_Step);
  This.Presence = "invisible";

  Note that you need to reposition the cursor before you hide the object or the leather, the code of the button will not work.

  Hope that helps

  Paul

• scanning multiple pages to the single PDF using HP ENVY 4500

  The guide says scan of the computer (as opposed to scanning from printer).  I do that and still can't scan multiple pages into a single PDF file.  Is it still possible?

  Hi griff0530,

  I understand that you want to scan multipage documents into a single .pdf file using your HP Envy 4500, yes it is quite possible.  When you use the HP software on your computer, follow the steps below:

  1. loading the document.

  2. click on scan . An overview of the analysis is displayed (by default).

  Important : the Preview Scan function must be enabled for scan multiple pages into one file documents. Additional pages from the original are added for the single file in the Scan preview window.

  3. in the scan preview is displayed, do one of the following actions:

  Click the sign Plus () on the left side of the window to scan additional pages. If you do not use an ADF, you must load the next page of the document on the glass of the scanner to add to each additional page.

  4. click on Save to capture the scanned file, but leave open the HP Scan.

  5. click on done to capture the scanned file and close HP Scan.

  I found this great information here: how Scan: Windows 7

  If you are using any other operating system, it's ok the same steps apply. I hope that's what need you!

  Thank you

• Fax multiple pages in the ADF

  When you try to FAX several pages, I load in the ADF of my 6700 printer and start fax.

  After that some Fax pages with success, get a printout showing ERROR 346. It also indicates that a communication error occurred during the transmission.

  This doesn't seem to be a random problem, but occurs whenever I try to fax multiple pages. In addition, the same thing happens with different recipients.

  I've never run into that until I started to use my 6700 printer. Previously, when you use a fax, it never happened.

  Any help would be greatly appreciated. Thank you.

  Hello mortn99 here, I hope you enjoy your Monday

  I noticed your post on the 346 error code that you receive when you send a fax to multiple pages of your 6700 JO. Here is a screenshot of the definition of the error code and a link to the Web site to interpret the error codes in the future. The suggestion is to change the speed to slow and disable the ECM which may help you!

  See eight Solution and Solution nine to get instructions on changing the speed and disable ECM.

  Send fax fail intermittently or fails for a single recipient

  

  Interpretation of the Error Codes in fax or fax history reports Communication error

  I hope that helps!
  

  Have a nice day
  

• Cannot scan multiple pages in the scanner using HP Photosmart 7520 glass

  I recently bought a HP Photosmart 7520.

  I'm pretty happy with it, but my wife has a problem with it that I wasn't able to solve even looking in the HP support sites.

  When scanning using the glass of the scanner in a pdf document, it has no option to add another page. According to the documentation, there should be a + button, but it is not found. There is an option somewhere that I'm missing? Here is a screenshot of preview (in french, sorry):

  

  Hello

  In the HP Scan dialog box, reduce the scanning in 300 DPI resolution or lower, then you should see the button "+" to add additional pages.

  Shlomi

• Why not DC use multi hearts to OCR multiple pages at the same time?

  My only use for acrobat is scanning to PDF. Since the processors of today have 4 cores or more, why is it not possible to OCR multi-core? Scanning and OCR of 500 pages is extremely slow, I don't see why each kernel cannot make a page at the same time perhaps then he could cope with the scanning speed.

  I have 4 hearts and 16 GB of ram under DC win10 and it is as slow as my machine AMD Athlon dual core that was running XI under win7 and I would say the same thing as version 9 in xp.

  Whenever I've updated, I expect improved performance to find only "features" that are of little use to me and no speed or observable performance improvement.

  When can I expect this ability to be integrated with acrobat?

  Greg,

  Adobe technical support cannot help you with this. They support the existing features and are not an outlet to provide improvements to software applications. Sorry!

  You should take the above suggestion was offered to make a feature request at: feature request/Bug Report Form

  Frankly, the current capacity of OCR in Acrobat is not designed for industrial power, such as 500 + documents scanned page work. The OCR function will need to be substantially updated to be a multithreaded and use multiple cores. It would also probably a version of Acrobat 64-bit Windows due to OCR address space requirements.

  In the meantime, if your document management needs include large amounts of work OCR PDF files, make you want to explore third-party solutions, stand alone or even Acrobat plug-ins server programs that can meet your requirements.

  -Dov

• How can I add new pages in the (fluid) reagent layout with Dreamweaver CC?

  I seem to be screwing up the CSS when I add new pages. I have to do it wrong. Help! @

  Build your prototype of FGLayout page so that it works well in all screen sizes (first mobile, then compressed, finally Office).    To create your home page, index.html SaveAs.   Then SaveAs page2.html, replace content.  Repeat for other pages of the site.

  Nancy O.

• How can ensure me that AddInstance adds additional pages in the order I want?

  My project is almost complete. All that remains is to put the button instance add at the bottom of the second page to function the way I want. It is currently set to click with the following script.

  statcardform.frontpage.instanceManager.addInstance (1);

  statcardform.backpage.instanceManager.addInstance (1);

  When I click the button, it adds a copy of the first page after the first page of the original and a copy of the backpage after the original backpage. This is not what I had in mind. I need solidarity each front and backpage and add each repeated front and back page after the backpage, so if you click on the button several times, you will get several copies of the same form of two pages.

  FrontPage

  BackPage

  FrontPage

  BackPage

  FrontPage

  BackPage

  etc...

  Currently it does is

  FrontPage

  FrontPage

  FrontPage

  BackPage

  BackPage

  BackPage

  How can I fix it to work as I want?

  The link for each page tab is set to "repeat subform for each data element" and an initial number of '1' with no minimum and no maximum.

  Why not wrap the page front and back in an another subform (I will call this doc). Then, you need to only repeat doc.

  Make sense?

  Paul

• How can I include multiple pages for the default homepage on statup

  When I launch Firefox, I want to show several tabs with a few of my favorite sites. Is it possible that it could be in IE?

  See

  • How to set homepage | How | Firefox help
    https://support.Mozilla.com/kb/how%20To%20set%20The%20home%20page

  The easiest way is to have exactly the pages you like your home page as the only pages open in the window, and then set your homepage

  • Tools > Options > general >...

  When Firefox Stats: view my homepage

  Click on "use current page (s) '