Add new host esxi 5.1 for the existing cluster of vcenter
Hello
I would like to add a new host Virgin esxi 5.1 to an existing cluster from the vcenter. What are the things that I have to preconfigure on the host before add you it? I configured the network already, storage will be implemented when I add it to the cluster, right?
So, what I ended up doing was just set up time, networking and dns. I then added the host while he was in maintenance mode. I have a Compellent SAN storage and im using a folder in compellent to map all my Lun, then I can just add a new host in this folder, and it will automatically map all volumes to the newly added host once I go into vmware and make a new analysis on the FC HBA host (do FC fabric SW zoning first of course). I then added a file .locker on one of my SAN LUNS scrach location/newspapers. She's.
Tags: VMware
Similar Questions
-
We have a simple DMZ where I set up a host running ESXi 5.1. I have another windows server in the DMZ subnet and I can load the new ESXi her host's web site. From my PC in our LAN I can not pull the top web interface 5.1 ESXi or connect via vSphere Client. If I enable SSH on the new host, can I use Putty to connect to the new host ESXi from my PC in LAN. I watched the event logs in our firewall and nothing seems to be blocked. I guess that the problem is related to a value or a firewall setting in ESXi 5.1 but I don't know. Any help would be appreciated.
Thank you
-Kevin
Just a thought. Why don't run you the ESXi host in your internal network management and only virtual machines in the DMZ? Would make the ESXi host management even more secure, and you wouldn't have to open Firewall ports.
André
-
License of new hosts ESXi 3.5 in the new facility in vCenter 4?
We are looking to possibly buy an IBM Blade Center solution with vSphere. What we seek is using USB hypervisor (ESXi 3.5) embedded keys available for the blades (HS21XM / HS22) and the use of these rather than installing ESX / i on local storage. What I want to know is, is it possible? I think that we will need to install the VCenter 2.5 license server in order to manage 3.5 computers hosts and can then install VCenter 4.0 on top of this same server to use the new feature of vSphere, but can I still get a license these old hosts (like new)? Allow the VMWare you (as a new purchases) use vSpehere Standard licenses (which we will go to) "extension" of the functioning of the ESXi 3.5 integrated to include the features included in the Standard version of vSphere, or its equivalent has 3.5. Not 100% sure about the licenses and have verified what I can on the forums and can't seem to find anything so your advice would be very grateful
Thanks in advance for your help
Carl
Welcome to Carl,
1. Yes, you can use the ESXi which will be integrated to the server during the expedition.
2. his
no mandatory guest licese ESXi 3.5 with the 2.5 license server,
We have other 2 options to the license of the host - with host-based license
file and serial key. These two approaches are autonomous, no options
need server licenses or VC.
3. you can configure VC 4.0 guests to license the 3.5i with the 2.5 license server. This option is available inVC - Administration-> vCenter Server Settings-> licenses.
Hope that this guide will help you
VCenter Server 4.0 license server configuration
-CRS, RHCE, EMCPA.
-
Hi guys,.
I am currently working on a workflow for the provision of new hosts ESXi from scratch. Unfortunately, I glued on the new VMWare licensing to a host. I wanted to do this with a script element:
Entry:
Host (VC: HostSystem)
License (String)
Code:
Host.configManager. licenseManager. licenseAssignmentManager.updateAssignedLicense (Host.id, license, null);
Unfortunately, this returns an error indicating licenseManager is null.
Anyone know how to set the new licenseManager on the host or license in another way?
Thank you
Kamil
OK, I got it myself. Instead of approaching licenseManager thanks Host.configManager I used instead of the VC:SdkConnection variable.
Entry:
Host (VC:HostSystem)
SDK (VC:SdkConnection)
LicenseKey (String)
Code:
SDK.licenseManager.licenseAssignmentManager.updateAssignedLicense (Host.id, LicenseKey, null);
This works perfectly!
-
Adding a new host to the existing cluster
Hi all
The existing cluster has a connected SAN. Should what precaution I look forward to add a new host to the existing cluster? I did research that we should physically disconnect the HBA before adding, I don't know what it is to be honest.
Any help / idea would be highly appreciated.
Concerning
VDZ wrote:
Thanks a lot, guys
Please, how can one more thing I change the host name?
Appreciated all your help
Kind regards
Hello
Once the host is already in the vCenter inventory, you cannot change it, you must disconnect host to vCenter, delete the inventory and add it again using a different name,.
for example, if you specify IP during the connection wizzard, it seems in vCenter inventory under an IP address, if you want it to be visible as a hostname or a domain FULL, during the wizard name you used its hostname or FULL domain name
See you soon
Artur
Please, do not forget the points of call of the "useful" or "correct" answers
-
After response failure attaching pictures to the email received, l had opening of 'problem'... "" try again "screen but now cannot open new screen msg at all for the new message or a reply.
Hope I'm doing this right - tried restar, apparently seeking the answers and by publishing this request elsewhere. Appreciatte guidance!Hi Mike,.
You are welcome. If you have any other questions, you can always report to Microsoft Answers.
-
How can I add "Shut down" as an option for the action of the Power button if it is not available
How can I add "Shut down" as an option for the action of the Power button if it is not available.
Hello
Welcome to the Microsoft Community and thanks for posting the question. Looks like you want to add shut down as an option for the power button.
Visit this link and try the steps mentioned:
There are two ways to change what happens when you press the power button on your computer. You can change what happens when you press the power button on your computer case (or the edge of your laptop) and you can change what happens when you press the close button in the start menu.
Change what happens when you press the power button on your computer
Hope this information helps. If you have questions to answer us and we will be happy to help you.
-
Just changed my account information for payment, but payment results in a week, enough time for the new payment will be held for the new account?
HI Lucas,.
I see that you have tried to change the billing details, but they were not properly updated.
Please get in touch with the customer: -.
-
How can I get the download instructions if you buy a new computer and edit programs for the new device
Mylenium
-
The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode.
Hello everyone
Here's the situation...
I have:
vSphere 5.1 Cluster with two 5.1 ESXi hosts and configuration VSA.
vCenter Server running on a virtual Windows Server 2012 machine.
Task: Transfer virtual vCenter to a physical machine.
I have install the physical machine with Windows server 2012.
Installed vCenter 5.5 (hosts Newer then the ESXi 5.1)
VSA installed Manager (VSA Cluster 5.5)
When go to VSA Manager I am introduced to the following screen...
Recover DOES NOT work!
Full move operation DOES NOT work!
It recognizes the Cluster AUV-> check availability (is online and OK)-> begins to create the Cluster VSA and it fails with the following error...
Move the cluster host
VSA HA Cluster
The host cannot be admitted to the current cluster Enhanced vMotion compatibility mode. Under voltage or suspension of the virtual machines on the host can use the CPU features hidden by this mode.
Could someone please help?
Thanks to you all! This problem has been SOLVED as follows...
- VCenter Server go to--> "C:\Program Files\VMware\Infrastructure\tomcat\webapps\VSAManager\WEB-INF\classes".
- Open the file "dev.properties" with Notepad
- Change the line that says "evc.config.baseline = lowest" to 'highest = evc.config.baseline' and save the file.
- Perform the SERVICES. MSC and reboot 'VMware VirtualCenter Management Webservices'
After that it of back in the VSA Manager and run it again 'Cluster of VSA recover'!
Now, the wizard should be able to add hosts to the inventory, create the HA Cluster and add hosts to the HA cluster and configure Cluster HA.
Done everything! :-)
-
I installed FF on my new computer, Windows 7 Toshiba, I get the message Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. It is NOT open I have only one computer.
I had a computer scientist to try everything, and we cannot on it to open it.Search the firefox process firefox.exe and kill him with for example the Task Manager. It is also worth watching for the plugincontainer.exe.
The problem and the solutions are explained in the articles:
-
I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying
See "hang out":
-
our company had Adobe CS 3, we ship adobe creative cloud member of more than 2 years now. But we must all credit for the existing customer.
There is no current discount for loyal customers. You must have missed the opportunity to get a discount at the end of May. Before that if you were an owner of Creative Suite, you can get the first year at a reduced rate.
-
Add new portgroup for the entire Cluster
Hello
Currently I have the powercli script to add a new portgroup to switch existing on the same host. I'm looking to see how to do this on a whole cluster since the vSwitch I want to add that it is the same vSwitch on all hosts.
Get-VMHost-name ESXI01 | Get-VirtualSwitch-name vSwitch1 | New-VirtualPortGroup-name cpg400 - VLanId 697
This command works, but rather to a host at the same time, what is the proper syntax to apply to the entire cluster?
Have you ever tried something like this?
Get-Cluster-name mycluster. Get-VMHost | Get-VirtualSwitch-name vSwitch1 | New-VirtualPortGroup-name cpg400 - VLanId 697
-
How to prevent the host ESXi 6 to use the graphics card?
In my ESXi host computer, I have a NVIDIA Quadro 2000 graphics card. However, the host takes the graphics card to start stop passthrough to Virtual Machines (VM). Is there a way to prevent the ESXI host enter the graphics card primary?
"< a href ="https://justus.berlin/2015/06/enable-passthrough-of-mainprimary-gpu-in-xenserver-6-5sp1/"> XenServer has the means to prevent the army to use the main graphics Cardinal < /a > if all goes well it a similar method for ESXi.
This last post is an attempt to set the record straight about the ESXi host using the primary (or only) graphics card. In addition, more information will provide about success past by the graphics card to a virtual machine that is used with a monitor and peripherals as a workstation.
Configuration
ESXi 6.0.0 U2 (Build 3620759)
Material
Workstation HP Z620 (J61 BIOS v03.88)
(1) Xeon E5-2670
64 GB OF DDR3 MEMORY
(1) NVIDIA Quadro 2000
VM - Windows 7 Professional SP1
#1
There is no need to prevent the host from the use of the graphics card beyond to choose the graphics card to get through to a virtual machine. Do alerts if the host and the appropriate parameters are defined automatically. However, the Web Client vSphere does not reflect this behavior when running Firefox on Mac OSX 10.11.3 47.0.1. Recommend use if possible vSphere Client. It presents a panorama that is closer to the real situation within 6 ESXi. If the Web Client is not the height by the time vSphere client is relieved there will be real trouble.
#2
At this point, I think, the pilot VSGA vSphere installed as part of "vmware tools" on a virtual machine is required for the successful graphics card through to a monitor. The process of solving problems associated with a virtual machine to crash the host on VM shutdown or restart has led to the false impression that an uninstall of the VSGA vSphere pilot was necessary for the proper functioning of the virtual machine. Do not uninstall the driver VSGA vSphere.
#3
A virtual machine with passthrough crashing the ESXi host when to stop or restart a VM guest is not unusual. Click here to see an informative discussion about this and how to fix the problem. If the link does not head the Forum of the source, the House and perform a descriptive research. Essentially, the problem seems to be generated by the interaction of the VM with the PCIe bus on start/stop. In my case, after each accident, the ESXi host area before any PCIe 2 location where the graphic card is installed. See the transponder required for features in the BIOS of HP.
#4
ESXi through a GPU was a PITA. It is possible to give enough time and effort. VMware documentation is miserable, so dependent on human is a given. Be sure to leave breadcrumbs for others.
TTFN,
Jake
Maybe you are looking for
-
4 the urge win 8.1 video playback issues
Since update 8.1 win problems with video playback and the sound. VLC and other players like Flash (youtube) saw the shift with the sound and lose frames. I have the latest drivers and updates. The offset is not Visual, you can recognize especially in
-
Hard drive and global upgrades
Hi so my HP Pavilion p6707c hard drive has an honor to failure so I want to replace it and take this opportunity to upgrade other components in my lap. I want to upgrade the hard drive, RAM, CPU and graphics. I was wondering if someone could give me
-
Can not see the drive letter for Hammer 640 GB external hard drive
I have an external hammer 640 GB drive (which has a Western Digital WD6400AAKS drive inside) with important data. When I connect to my computer (under Windows XP Pro), I can see the player if I go to my computer-> hardware-> readers but can see any d
-
to start up I get this in a box saying - accelerometer st.exe - system error mfc 110 udll is missing, that got my little misssing
-
Limited or No connectivity on XP using the Wi - Fi connection.
Hello My husbands computer recently hit the skids. He was traveling for work and took his personal laptop with him. While trying to access wifi in his hotel room, there is no internet connection icon in the system tray and the connection to the folde