Add new portgroup for the entire Cluster

Similar Questions

• Add new values for the axis desabscisses when adding a new series

  Hi all

  I work with and I found myself with a problem when I try to add new series.

  < mx:ColumnChart id = "cChart" height = "100%" width = "100%" dataProvider = "{dataChart}" showDataTips = "true".
  >
  < mx:horizontalAxis >
  < mx:CategoryAxis id = "cAxis" categoryField = "{name}" / >
  < / mx:horizontalAxis >
  < mx:series >
  < mx:ColumnSeries yField = xField "{field}" = "{name} field" displayName = "{displayName}" / >
  < / mx:series >
  < / mx:ColumnChart >

  DataProvider is a table something like this:

  -Datachart - > [nameField:A, area: 20;]

  nameField:B, field: 30;

  [nameField:C, field: 80]

  In my application, user boxes add new series after the graph is created. For example, imagine that he wants to put on the table of following values:

  -Datachart - > [nameField:A, area: 13;]

  nameField:B, field: 62;

  nameField:D, field: 30

  [nameField:E, field: 92]

  Now, start the problem:

  When the graph is (adding series with ACE) refresh the values on the axis desabscisses are the same 'old'. In these cases ('A', B', 'C'), but the new do not appear (',' E').

  Is there anyway to fix this?

  Replace this part:

  var currentChart:Array = cChart.series;
  currentChart.push (series1);
  cChart.series = currentChart;  This code do nothing!

  with

  var currentChart:Array = cChart.series.reverse () .reverse ();
  currentChart.push (series1);
  cChart.series = currentChart; But this one does!

  This is to ensure that you will create a NEW array instead of use the reference to the former.

• How to add new drivers for the motherboard when BSOD 0x0000007e

  When my father-inlaw MOBO went so I got a new motherboard. The old MOBO and power passed.  New ASUS AM2 with nvidia 7025 and 630 a w/ALC662 came with only installable drivers. No separate way to install when windows does not start.  The SIS for the old MOBO drivers have been removed, but I guess that windows does not know which.  How can I get the drivers to load to get the very basic windows to start.  0x0000007E (0xc0000005, 0xba2a8750, 0xba4c742c, 0xba4c7128). I tried logging in the bootini file and it does not leave an ntbtlog.txt file in C:\, I see a screen saying it's nostalgia, but no file.  then I /sos and it does not give me line by line. then I /pcilock and basevideo and any difference.  The new MOBO has no floppy drive, so it makes it even more difficult.  Any ideas? How can I edit the registry when no boot?

  Hello

  See the methods listed in the section below:
  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

  I hope this helps.

• Can I add new tokens for the HTML template file?

  In the "index.template.html" HTML template file, there are chips form ${swf} which get a substitution of string value when "index.html" is generated.

  I would like to add a few new tokens like 'configurationFile' and determine the value of string elsewhere in the project.  The properties of the project would be very nice.

  Can I do this?  Or do I have to add my own Ant build file for this operation?

  Oz

  4Dtext tools

  Right now, the list of the tokens is hard-coded in Flash Builder. But this looks like an interesting enhancement request.

  Would be nice to have it filed at https://bugs.adobe.com/flex.

  -Remy

• Adding a new host to the existing cluster

  Hi all

  The existing cluster has a connected SAN. Should what precaution I look forward to add a new host to the existing cluster? I did research that we should physically disconnect the HBA before adding, I don't know what it is to be honest.

  Any help / idea would be highly appreciated.

  Concerning

  VDZ wrote:

  Thanks a lot, guys

  Please, how can one more thing I change the host name?

  Appreciated all your help

  Kind regards

  Hello

  Once the host is already in the vCenter inventory, you cannot change it, you must disconnect host to vCenter, delete the inventory and add it again using a different name,.

  for example, if you specify IP during the connection wizzard, it seems in vCenter inventory under an IP address, if you want it to be visible as a hostname or a domain FULL, during the wizard name you used its hostname or FULL domain name

  See you soon

  Artur

  Visit my blog

  Please, do not forget the points of call of the "useful" or "correct" answers

• Right-click to add new folder on the desktop, is there

  I want to add new folders on the desktop
  (I use to be able to right-click and new folder was an option to add to the desktop)

  Hello sammyg11, you post to a support forum for the mozilla firefox browser. the question you asked is not really related to firefox but is a question about windows: in this case, please refer to the resources of foreign aid: www.sevenforums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

• Satellite L - can I add new accounts via the command prompt?

  Is it possible that I can add new accounts to the machine via the command prompt on the screen of "recovery"?

  (When you start in recovery mode and select command prompt)

  I tried the normal commands "net user username / add ', but the accounts are not added to the machine.

  Y at - it another command which can be used?
  Thank you.

  Hello

  I don't know if it will work using the in my opinion Mr. recovery console, it is not possible.
  As far as I know that you can add the user and the password using the CMD, but this might work only when the Windows operating system has been loaded.

  In this case, you can use this command to add the user account: + net user username / add +.
  If you want to add a password for the user account, then you must use this way: + net user username password / Add +.

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.

• Need to disable HA to power down the entire Cluster?

  Hello

  We can to the bottom of our cluster SAN and ESXi 5.0 for electrical maintenance. We stop all the virtual machines, and then the ESXi hosts... Is it necessary to disable HA before stopping the ESXi hosts? I don't know the procedure to stop the entire cluster availability Guide. Does anyone have experience with this and if so can you please provide the steps?

  Thank you

  Jimmy

  No there is no need. Just power off all the virtual machines and then all hosts.

• Can I add page numbers to the entire document once I have the combine in pdf format?

  Can I add page numbers to the entire pdf document when combined?

  Hi gjanowiec,

  You can add page numbers to PDF using Acrobat. See https://acrobatusers.com/tutorials/how-do-i-add-page-numbers-at-the-bottom-of-my-pages for more information. If you do not have Acrobat, we invite you to try free for 30 days (www.adobe.com/products/acrobat.html).

  Please let us know if you have any additional questions.

  Best,

  Sara

• Add new data to the table in a log file

  Hi all. I am new to Oracle and I need to also write new data table in a logfile on Linux in order to live in the display screen. My first thought was to write a trigger, and after some research on googled around, I finally came to this:
  
  create or replace trigger foo_insert
  After Insert on foo
  for each line
  declare
  f utl_file.file_type;
  s VARCHAR2 (255);
  Start
  s: =: new.udate | '-' || : new.time | ' ' || : new.foo | ' ' || : new.bar | ' ' || : new.xyzzy | ' ' || : new.frobozz | ' ' || : new.quux | ' ' || : new.wombat;
  f: = utl_file.fopen ('BLAH_BLAH', 'current.log', ' a');
  UTL_FILE.put_line (f, s);
  UTL_FILE.fclose (f);
  end foo_insert;
  
  It seems properly to add new data in the log file as new inserts occur, but open and close the file each time are of course not optimal.
  In the app real new lines could have inserted every second or two. How can I optimize it? In addition, the log file will be archived and turned every day, so there must be a way to effectively report the relaxation of the oracle to reopen the case.
  
  
  Thank you!

  >
  I would like to pursue the optimization of the trigger
  >
  As Ed suggested you need to think this through a few others and refine the requirements.

  You said "I am new to Oracle. So you may not realize that anything a trigger didn't REALLY EVEN HAPPEN! The transaction can still be restored by Oracle or by the appellant. Want that all the 'hiccups' look too? If this isn't the case, then you can not use a trigger to do this. You need the process that translates the trigger being called to do logging after the data is stored.

  It should be noted that this requirement is before we can offer solutions to a problem.

  Assuming you want the trigger record all attempts change the data, then the best way I know to do that is to minimize the work does the trigger.
  Another fundamental principle is to follow the advice of the Ed and have a clear separation and distinction between "what" should be done and 'how' to do it.

  To minimize the trigger work change proposed Nicosa approach. Create an AUTONOMOUS_TRANSACTION stored procedure that handles the 'how' and just have the trigger to transfer data to the stored procedure values. The trigger provides data; He doesn't know, or care, what is done with the data.

  The stored procedure is then free to use the files, a table, write to a file or any other method is proving to be the best. You can change the methods without affecting the trigger.

  A queue or table may contain data, but again once you need to think about the obligation. Do you need fair access to data only once? Now, you want a "tail". But what happens if this requirement change tomorrow? You won't have to redesign the architecture.

  With a queue once you delete the queue data it won't here later if you want to get it again. With a table you can take as long as you want.

  I would like to start by using a table to store the data. If you use a sequence number or "insert_date" value, you can always query the data of interest. The table just collects data. He does not care how to use data.

  So, by using proven design principles and knowing that the requirements are for the most part unknown and may change unexpectedly, I would be:

  1. create an AUTONOMOUS_TRANSACTION stored procedure that accepts the parameter data and the thicket in a simple logging table.
  2. change your trigger to call the procedure to step #1
  3. create another procedure that performs a query of 'tail' for you will depend on 'insert_date' number or sequence. This query can write data to a file or return a cursor ref that your script can use to provide data for display.

  The approach described above takes each step in the process relatively independent of the other stages.

  Until put you the finishing touches to the requirements that you do not want to lock up your initial design.

• Dreamweaver allows us to change destination, a link throughout the ENTIRE cluster ofPages?

  I have a link to an external site across the entire cluster of pages on my site.   Is there a command in Dreamweaver CS5 that would allow me to change this link as it appears throughout the entire cluster of pages, at the same time?    That of course would save me a lot of time if it can be done without me having to make the change manually and individually, on a basis of page by page.   Maybe something like this command exists, perhaps?

  "Change all occurrences of the following address of the _ the _ throughout the entire site.

  Suggestions, please?

  Dreamweaver allows three different methods to do so.

  As suggested, you can use the code server to call a page of text you are simply editing in one place.

  Also, as suggested, we can use of Dreamweaver Find and replace tool to replace all occurrences of a particular link. If you are looking for it in the source code, you must be very careful on how you specify what to search for and exactly what you want the replacement code.

  Finally, I started using templates for stuff with recurring information throughout a Web site. Things like the navigation, footers, headers and so on are very useful to automate a change in recurring content. If you have a link to the page that changes in navigation, if you have a model that manages that in all the pages, change you it once and Dreamweaver will ask you if you want to update all files based on this template. Answer 'Yes' and the page any changes will be made.

  Pages can be linked to only one model and it should nest templates.

  So, to fully answer your question, Yes. There are three methods at your disposal.

• Can I add new members of the sketch in a line of a form?

  Hello
  I thought I heard we can add new members of the sketch in a line of a form in V11?
  So if a I have an account called 'Expense of CapEx' computer in a row, I can add new members "Computer CapEx Depr 2 years", 'Computer CapEx Depr 4 years' etc.
  I am in Version 9.3.1 and need to migrate to v11 if this feature is available.

  You could also consider supporting detail as this type of data capture method. I've written a few applications where we have provided a "class" of assets in the accounts, but when people entered data in a specific asset class, they used retail support to specify exactly what they were buying. You can report on the support of detail, but it does not require a change for hierarchies.

  Hope this helps,
  -Jake

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• implementation of the Hosts file on the server for the entire network?

  I see a lot of information on how to edit the local Hosts file on individual computers. But, is it possible to edit a Hosts file and have effect throughout the network?

  We have a network of a little over half a dozen of Mac mini, who take their DNS information from another Mac Mini running the application server OSX (under El Capitan). This server is the primary DNS machine for the network. I want to implement a Hosts file for the entire network.

  Parental control seems to be broken in OSX El Capitan, so this seems like the best next to us, short option to buy some third-party service, which I prefer not to do.

  I think that dnsmasq installation on your Mac server and configuration of all your computers to use as your "DNS Server" will achieve what you want.

  See osx https://oracle-base.com/articles/misc/dnsmasq-for-simple-dns-configurations-mac-

  Why do you feel you must do this?