Add space and dash at the time here
Hi guys,.
is there a quick way I could add this space en dash and dash to here after a Superindex of character?
I do it manually now. No problem with 4 notes but 20 it a little different.
Thanks for any help or ideas.
See you soon,.
SEBS
You could simply add them as part of the number in the list numbered for style options.
Tags: InDesign
Similar Questions
-
Windows XP Home Edition
Hello Tomartcom,
What type of document you're off / put in?
Formatting problems you encounter can be in the formatting code left by the program, you are taking in, and when it is placed in the program you put into the formatting is inconsistent. Try to paste the text into Notepad, then copy the text from Notepad and paste the document that you want to use. Notepad should drop all the code formatting out of the text.
Hope that helps, I look forward to hearing from you.
Steven
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Windows Explorer does not work properly and hold all the time
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
can not see Add targets and devices in the Project Explorer
Hello!
I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:
the cRio:
OR VISA 5.0
NEITHER RIO 3.0
RT LV 8.6and he allied himself with what I installed on my host.
I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.
Any help would be great!
Thank you!
Rajesh
After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?
-
Original title: need help with wordpad problem
When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there. I double space between lines and all that is more than one page disappears. I tried all the different formats (no envelope, window envelope, etc.). How can I fix?
Hello
· What happens if you use another application to preview before printing?
· You are able to print the document correctly, or you receive no error message when printing?
You try to use Microsoft Word or Notepad to check if you face the same problem.
First of all, I would like to check to see if print preview is working on a new empty document with only a word in it.
If Yes, then the problem is the document.
You may need to clear any formatting, that depends on where you copied from.
Your rule of printer drivers print preview
-
Whenever I have turn off my pc and reboot later, the time and date go to 0.00
Original title : improve system performance slow slow start
Whenever I have turn off my pc and reboot later, the time and date go to 0.00
Probably means the ROM BIOS chip gone bad and must be replaced. Its a small coin like chip located on your motherboard. You should be able to buy one on where one sells computers and electronic products.
-
opening program minimizes and optimizes all the time
progam start showing some problem of its own.
progam was started for the first time after starting the computer indicates a sound problem, windows Explorer minimizes and optimizes all the time until he is arrested. Pls suggest a solution for this type of problem.
1 did you do changes on the computer before the show?
2. you receive an error message?
3. what version of operating system you are using on the computer?
Method 1:
You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING:
If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted
Method 2:
You can also perform a clean boot and check:
Windows XP: How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Windows 7 and vista:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.Method 3:
You can also try to run a SFC scan, it will scan and try to correct some of the system files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833 -
Original title: what I am doing wrong?
I just reinstalled Windows XP on a blank hard drive (new). I have installed WLAN driver disk resource. I can't the WLAN to work. It shows that the drivers are there, but I can't always to work and pick up the wireless here. What can I do?
Hello
The following articles may be useful:
5 steps: how to set up your network wireless home
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
Slow and freezing all the time
My computer runs windows xp and its also kind of the ancients in regard to computers today, and I recently installed all updates and microsoft security system. Now my computer is running very slowly and crashes all the time! Help please! Its driving me CRAZY!
Hi DawnMichelle,
You can update the computer with the latest device drivers by visiting the manufacturer's Web site. In addition, make sure you have the latest Windows updates installed.
See also:
Increase the speed of the PC: optimize your computer, help your PC run faster
Hope this information is useful.
-
March 31, 2016
Hello.
Yesterday morning, I installed Adobe Acrobat Pro XI, and because of the time needed to install, I left my office for the day and my computer left overnight. When I arrived at my office this morning, I checked my email and found Court electronic filing of notifications of PDF documents filed in two federal cases, I'm working on that. I went to open the documents in both cases, but the documents would not open, and I have lost these documents. I could look at my computer screen and saw a message from reference in order for me to open documents, I had to accept the license agreement provided by Adobe.
I'm not an individual computer, and I seriously need your help. Could you please guide me for the license agreement I need to sign in order to retrieve and open PDFs that are filed in the federal courts, I practice before? I have some papers I have to drop off this morning in Federal Court, which must be filed in PDF, so time is critically important.
Thank you for your help, cooperation and professionalism. I sincerely appreciate your assistance.
Best regards
Dean Browning Webb, Esq.
TV: [503] 629-2176
Cel #: [253] 686-5111
First of all, I'm sorry you had trouble. But you posted in the wrong place. This is the Adobe Connect forum, for users of Acrobat Connect Pro.
How have you lost documents? If documents have been emailed to you, you should always be able to recover again from your email. Try to launch Adobe Acrobat FIRST, then using file > open to retrieve the documents where you stored the on your computer.
Hereis a list of product licenses, but I do not think that this will help you. Try what I suggested and let me know what happened please. Good luck!
-
I can't install the LR. I made the account, and paid at the time of install the creative cloud wrote the application has stopped working. What to do
Install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe
Use it to install your lr.
-
Dear support,
I've updated my browser to version 29 and now, there is an 'Add to Favorites' button the
left of my bookmarks button. I don't want this extra button because I keep hitting my mistake
all the time when I want to see my favorites. But eventually, I'll add the current Web site to the list
I don't want to.Here is a screenshot of what I'm talking about. I've marked the which button ' add to ' I want to get
get rid of: http://oi62.tinypic.com/2ihwaww.jpgI want only the normal bookmarks button on my GUI without this button 'add to bookmarks '.
automatically attached to it!Can you help me please?
In fact, there is a way to get exactly what you want: you just need to install the add-on classic restaurateur theme: https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/
-
I need to have text to appear in the mobile and Tablet discovered 100% wide. I need the same indented text by 200px on both sides in the view of the office.
Can you give us a link to your Web page in question and / or paste your CSS with HTML here and the div that you want to assign with indentation?
This can be done using questions from the media. You can tell your site to load a particular rule of CSS for the site on a desktop computer and another rule CSS for mobile & tablet.
Something like this:
@media screen and (max-width: 720px) {}
{#textdiv}
Width: 100%;
}
}
Take care of the div with ID "text", width of 100% on the screens with max-width as 720px (tablets & phones) normally.
@media screen and (min-width: 721px) {}
{#textdiv}
text-indent: 200px;
}
}
indentera the text by 200px on larger screens than 721px.
But if you want to have them both 200px left and right space, you should use the fill and no dash.
padding: 0px 200px;
will give 0px padding on top & down and give 200px on left & right.
-
Re: My Qosmio F60 - 11f is VERY SLOW and stuck all the time
Hi everyone :)
I have a qosmio f60 - 11f with 2.26 to 3.3 with turbo i7
6 GB of Ram
640 GB HHD
1 GB Nvidia GT330M graphicsthe problem is that since I bought it and its slow I don't know why!
Now the laptop over 14 months and I did a lot of recovery time because of problems and stuck, I him.
last day I did the cover and I noticed that the laptop is becoming slower!
It takes about 5 minutes to get started! not only that, after started and open any folder you will notice how slow it is. Even in the videos I can't open it because the laptop will be stuck and play the video very very slow!
Please help me.Hello
First of all I recommend to check the HARD disk for disk failure HARD errors that may affect the performance of the computer, you should check the HARD drive using freeware tools one of the tools that I use is the Drive Fitness Test he has been published several times here in the forum and its really great software.
If the HARD drive would be ok and if no error would be detected, then, I recommend disabling some processes that are not important for you in many cases different tools would be charged during the OS start process and these tools run in the background that slow down the operating system.
Run msconfig and check the Startup tab
Here you will see all the programs that are loaded at the beginning, you can uncheck the tools is not necessaryNote: If you are not sure what means the only process, use google and search in internet for more details otherwise don't disable this.
-
Program LabVIEW will hang between 33% and 50% of the time.
I have a problem with a Labview program, I did. I have two programs that do the same thing. One is as a flat sequence, and the other is in the form of State machine.
As explained in the link below, I would like to use a microcontroller to perform wiring for automation of a measurement process. A separate current source and volt meter will be used.
https://forums.NI.com/T5/LabVIEW/sequence-a-good-idea/TD-p/2601333
I did some simple test programs that I join since then. The problem is when running, that the labview program crashes, but not all the time is to run the program.
For example: Hall 1.2.vi will correctly work twice with the third time, he is executed, it crashes. If Cancel you and try again, it will run again twice without any problem with the third hanging. It is in the flat sequence format (was in a flat sequence, but merged windows because I thought that was the cause). From what I can tell, the program crashes when calling Keithley 6517 unique Read.vi. Two connected Keithley devices are connected to the computer via GPIB to 16 and 27. The way I checked if it was this vi the cause or contributed to what I deleted the program never hung and it. I find it very strange that it crashes exactly on the third attempt every time.
Simple.VI Hall 1.3 will work the first time and hang the second time. If it works 50% of the time. It is in the format of State Machine. It hangs in the case entitled "Measurement 1" that contains the Keithley 6517 unique Read.vi.
I used the running highlight button and watched the program to run. Curiously, it only crashes when you use this button. So I tried to add some delays/waiting in different places without success.
This could be the cause? As a side note, I say that the program is suspended for two reasons. The principal is the program does not run so the execution arrow is always black. The second thing is that if you notice at the end of the labview program, I have a block he who turns to the power source which does not happen when it crashes. I have to turn it off manually, and then click the abort program button to stop labview.
Maybe you are looking for
-
Overtime I want to print I have to put my password for wifi wireless.
E-all-in-one printer HP Photostat 6510, model B211a name cq761a. Windows 7 64 - bit Apple iPad 2, I have to put my password wireless wifi the printer manually whenever I want to use. Once I do that it works very well. How can I keep my password in th
-
I have the following in Windows Live Mail - error 0x800ccc6d
-a file that is too large for the server to send. I'm trying to find out how to erase messages from the Outbox. Any info? I really need help! Thank youI tried to send a few photos, but the file is too large for the server. He keeps trying to send the
-
Script to get use of the memory with the parameters like VM uses, active, granted
Hi friendsCan someone help me get the powercli scripting to get the use of the VM folder memory wise with metricks as consumed, Active, granted for two weeks with a period of time for example special hours of buisness with output to a CSV as belowVmn
-
Mounting VM on the host machine?
HelloRecently, my trial expired for Fusion Desktop 6 for Mac, but I need to get some files of the virtual machine on my host. I know that this is possible, but when I use the app VMMounter thing, I can't find it anywhere, not even download the FUSE t
-
I use Lightroom CC 2015 - I just upgraded to version LR ^ and everything worked WONDERFULLY, but last week my gradient and radial filter stopped working correctly, and I'm not sure how to fix this? For example when I click on them to use them, on the