Add the new Equallogic system
Hello
We use 2 PS4000 systems in a group. Now, we wanted to add additional capacity to the group, and it seems that we must add a PS6100 model, because the PS4xxx series can have 2 systems per group.
What is the best way to develop our Equallogic system? PS4xxx systems can be added to a group of PS6100 lossless or start over? Or does first to transfer all data in the system of PS6100 and reset and add the PS4xxx later?
good documentation on this subject?
Thanks in advance
Tom
Yes, you can add the additional PS6100, which will remove the limits of PS4000 configuration.
You can add it as its own swimming pool and then move the volumes on the new Member, or put it in the same pool as the PS4000.
First pass of the PS4000 at least 5.2.5 before adding in the PS6100. Then proceed to PS6100 to make. I think he's not coming with 5.2.5 installed.
If you let me know what is the size / speed / RAID type of the PS4000 and what size/TPM in the PS6100 I can offer you some general tips.
The Administrator's guide has information about the management of members and pools, there is also a report of tech Storage Tiering
en.Community.Dell.com/.../19974554.aspx
Kind regards
Tags: Dell Tech
Similar Questions
-
Add the new SCSI controller and new drive - powershell SDK
Hi all
I'm trying to add the new disc of paravirtual to my VMs. There are two types of virtual machines in the environment; a Paravirtual controller attached and others are without controller; so my task is to set the new drive of paravitual using powershell SDK.
So far I am successful with my code if the controller is already present but the script fails when I try to attach the controller. with the error.
RecommendDatastores: The method call failed because [System.Object []] contains a method named "RecommendDatastores".
C:\NodeDeployment\Inprogress\Add_newPVScsiDisk.ps1:111 tank: 44
+ $generatedkey = $SRM. RecommendDatastores < < < < ($storageSpec)
+ CategoryInfo: InvalidOperation: (RecommendDatastores:String)], RuntimeException
+ FullyQualifiedErrorId: MethodNotFound
I know that this script is not good enough to post here because it is an initial draft, but in the script attached please help me with the present part-
The Script requires a csv with VMname entry; Disksize to be attached and store cluster data
else { Write-Host "Paravirtualized SCSI Controller Not Found in $vmname.. Trying to add new scsi controller and additional Hard-disk..." $NewSCSIDevice = New-Object VMware.Vim.VirtualDeviceConfigSpec $NewSCSIDevice.operation = "add" $NewSCSIDevice.device = New-Object VMware.Vim.ParaVirtualSCSIController $NewSCSIDevice.device.key = -222 $NewSCSIDevice.device.busNumber = ($allScSiController.BusNumber.Count) $NewSCSIDevice.device.sharedBus = "noSharing" $NewDiskDevice.device.controllerKey = -222 $NewDiskDevice.device.unitNumber = 0 $NewDiskDevice.device.capacityInKB = ($diskSize * (1024 * 1024)) $storageSpec.configSpec.deviceChange += $NewDiskDevice $storageSpec.configSpec.deviceChange += $NewSCSIDevice $generatedkey = $SRM.RecommendDatastores($storageSpec) $key = $generatedkey.Recommendations[0].Key $SRM.ApplyStorageDrsRecommendation_Task($key) }
OK I have it myself; I guess busnumber was the problem. He converted to INT working like charm...
Now, I have to work with storage Drs IE. with the ReconfigureVM_task method. hoping that will work also...
else {}
[int] $busnumber = $allScSiController.Count
Write-Host "paravirtualized SCSI Controller not found in $vmname... Try to add the new controller scsi and extra hard drives... »
$NewSCSIDevice = new-Object VMware.Vim.VirtualDeviceConfigSpec
$NewSCSIDevice.operation = 'Add '.
$NewSCSIDevice.device = new-Object VMware.Vim.ParaVirtualSCSIController
$NewSCSIDevice.device.key = - 222
$NewSCSIDevice.device.busNumber = $busnumber
$NewSCSIDevice.device.sharedBus = "noSharing".
$NewDiskDevice.device.controllerKey = - 222
$NewDiskDevice.device.unitNumber = 0
$NewDiskDevice.device.capacityInKB = ($diskSize * (1024 * 1024))
$storageSpec.configSpec.deviceChange += $NewDiskDevice
$storageSpec.configSpec.deviceChange += $NewSCSIDevice
$generatedkey = $SRM. RecommendDatastores ($storageSpec)
$key = $generatedkey. Recommendations [0]. Key
$SRM. ApplyStorageDrsRecommendation_Task ($key)
}
---
Concerning
Sanshis -
Add the new hard drive into the data store in ESXi 4.1
Hi all
I got ESX 4.1 installed on the Dell server, and I have 3 virtual machines on a data store.
I added a new 500 GB scsi hard drive to the server,
and I need to add it to the datasore or create a new...
How can I see this new hard drive? and add it to the data store?
Waiting for your help.
concerning
Abrams
Oracle system engineer
Abrams,
That's all I can help you. These instructions are based on the Perc 5 / i controller, which I think you have on our system. You have not specified the server so I just assumed that this is so.
1. unscrew the hot spare that you just made. Follow this link from Dell.
http://support.Dell.com/support/eDOCS/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp10613432 follow the link for the installation of virtual disks - http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1069357
This link has three steps to void, skip the step on "spare parts of designate hot."
a. create the virtual disks and select virtual disk options. -Online steps to create another disk group and add the new disk to the disk group.
(b) designate the drives hot spares (optional). =>, YOU CAN SKIP THIS STEP
c. initialize virtual disks. -online must do. just do not initialize the incorrect disk.After the step #2 c, you should be able to access the drive in ESXi or command-line (list of nmp esxcli devices).
And no, you cannot add this manaully until do you step #2 above which is to define the disk group, creating virtual disks and initialize the virtual disk.
Good luck.
-
IRC: Add the new application staus update
We need to add the new status of applicant except seeded. How add us new status to an applicant.
In the mass update page by selecting the update status we can update the status of candidate for the 'details and change year reason Applicant status '.
How to add new values to the fall entered any possibility to reach.
Thank you
SivaThese are only statues of the assignment, then go to responsibility HRMS and open the form "set the articles of surrender." All the statues of assignment is not in iRec, only the articles with the type of system (offer, the first interview, second interview, Application Active, request to terminate, etc...)
-
I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device
It is impossible to tell from this information. Choose about this Mac from the Apple menu, click more information and search the model identifier.
If it's MacBook1, 1, 10.6.8.
If it is MacBook2, 1-MacBook4, 1, 10.7.5.
If it's MacBook5, 1 or MacBook5, 2, 10.11.6.
If it's MacBook6, 1 or greater, 10.12.
(144865)
-
I have upgraded to the new operating system, El Capitan 10.11.4, and now my MacBook Pro is in trouble. Should I uninstall the new system and if so how?
Restore the backup that you did when you replaced the old system
-
Add the new entry name of folder of bookmarks does not
(There's a reason I'm fool the previous thread on this subject, as well as my response to this: I couldn't find a way to add FireFox 10.0.2 to the tags of the thread.) If the thread tags may be edited/added, I wouldn't highlight problems with FireFox 10.0.2 by launching this new thread.)
RE add new bookmarks folder, can not enter the name of the new folder:I am now having this problem with FireFox 10.0.2, 11/03/2012
When I click on add a folder, a new folder appears in the tree view and the folder name field is highlighted for the entry. But when I start to type characters in the field, I can only type 1 or 2 characters at the most seized stops accept input. I then go to the bookmarks menu, locate the new folder, right-click it, click Properties and complete the registration of the name of the folder.
At worst, the folder name field will cease to accept entry as soon as I type the first tank, in which case the name of the folder will remain as "new folder." I find the new folder in the bookmarks menu to change the name, as described above.
It is very annoying because it adds a number of additional steps just to add a new folder in the bookmarks menu. Add the new folder through the "Show all bookmarks" and navigate through the folder hierarchy are an alternative workaround, but that records all the steps.
Any ideas or solutions?
Hi John99,
It has worked well in Mode without failure. Thanks for the suggestion!I'm going offline a bit to understand what add-on, plugin, etc., could be causing it. In the meantime, I have marked your suggestion to use Mode safe as useful so that anyone else coming here could get the clue.
I should probably drop another line in the thread for the guy who in (or has been) using FireFox 7...
I'll post my results if I can understand it.
UPDATE:
I went after any add-on which had nothing to do with bookmarks.
It was the first add-on I tried, SortPlaces 1.9.1 that automatically sorts bookmarks in various ways according to the parameters. When I disabled it, the problem disappeared.
I re-enabled it and checked the options to see if I could understand why she was stop to add the new folder. In the 'Options' tab, there is a time limit for how long interval SortPlaces will wait before you sort a bookmark changed or added. It was set to 3 seconds.
It is not long enough for old men by typing the new name of folder. I put it in 10 seconds. Then, I created a new folder of bookmarks and start typing a name long nonsense, while I looked at the clock. After that 10 seconds it stopped accepting the entrance, right on the mark. What this hidden for me earlier, it was that when he stops to accept input, you don't see the new folder to place in the position of sorting on the menu add a folder. You will see that if you expand the folder later. It's probably why I didn't connect the two.
Anyway, problem solved. I'm leaving the delay to 10 seconds. If I ever need to be longer, I'll just increase it.
Thanks again for the suggestion of Mode safe and enjoy the next season of mud.
Alan Mintaka
-
I got the new tab next to open tabs button, but with a recent update of Firefox, the tab button disappeared. Went through all the help points, but how do I add the new Help tab is not listed. The only way to open a new tab is manually using the buttons on windows/t or opening the file and choosing the new tab.
Hello
It could be that he is hidden behind another icon. Please try this: right click on the empty space after the last tab and Customize.... With the mini window open, you can move the other toolbars and icons to check if the new tab button is hidden. You can also check inside the mini window customize the icon named new tab or click Restore Default Set that will be hopefully restore back. Please note that if nothing is uninstalled or disabled when you click on restore by default, you will have to redo all changes to manual/personal toolbar.
-
can I use time machine to restore everything, only the data, not the operating system
Why would you go back to a previous operating system when you just got a new hard drive with the new operating system on it?
-
What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image
Your question it will be better answered in forum Windows 7 installation and deployment on TechNet:
-
Battery blackBerry 10 draining with the new operating system
Hello... has anyone else experienced battery drain with the new OS? I downloaded 10.2 yesterday night and plugged my Z10 into a wall outlet. She enrolled in the 33% autonomy this morning after an hour 5 responsible... anyone else have this problem?
Nice day
Welcome to the BB forums
I'm not having any problem, have you added all the emails, applications?
Its normal to let your Z10 adjust to the new operating system.
-
Info on the device
T-Mobile 9700
V5.0.0.586
So as others waited until what tmobile had an official release for the new OS, I used before the stock 5.0 OS. I did not read about the new operating system and mines unwisely update. My problem is that the left upper button convience asks for a password when I lock it, from what I read the only way to block it and password prompt on unlock is ALT + ENTER.
I was wondering if someone had resolutions, I love my 9700 and this problem upsets me just, I just don't see me lock the phone with alt + enter. I have even try and downgrade the OS, if someone could tell me how.
Thank you guys.
Everything I read is that blackberry has released the password locking and his return do not, if you open the Desktop Manager and have the phone hung, if you press the button update, in that you having the option it downgrade to the old operating system that you are running, at least I did on mine
-
Driver is not compatible with the new op system. You or Belkin have download free fix or pilot?
www.Belkin.com
-
How to add the new column in existing table to our desired location?
How to add the new column in existing table to our desired location?
For example, I have to add the new column 'course' before the salary column in the emp table.
I think the best way is to add the column at the end of the table and create a new view with the order of the columns...
Another option...
places the data into a temporary table and recreate the table with the correct order of the columns, and then insert data to the table from the temporary table
Refer
Add column (from table) in the desired position
Example:
CREATE TABLE temp_my_user LIKE)
SELECT * FROM password);
DROP TABLE password;
(Password) CREATE TABLE
userID NUMBER
, first name VARCAHR2 (25)
, middleInitial VARCHAR2 (1)
(, name VARCHAR2 (25));
INSERT INTO password (userID, firstName, lastName)
(SELECT username
first name
lastName
OF temp_my_user);
DROP TABLE temp_user;
-
Dear,
Could someone explain in details the steps to create the new group of payment like cash on delivery?
Please don't tell me to refer to the documentation because I did not understand what
the implementation is not clear
Any help is appreciated... Thanks in advnace
Create a payment CashOnDeliveryPaymentGroup extension of PaymentGroupImpl with its group properties
create the interface and implementation classes - CashOnDeliveryProcessor with the following methods
Public CashOnDeliveryStatus permits (CashOnDeliveryInfo, cashOnDeliveryInfo, CashOnDeliveryPaymentGroup cashonDeliveryGroup);
public CashOnDeliveryStatus flow (CashOnDeliveryInfo cashOnDeliveryInfo, CashOnDeliveryStatus cashOnDeliveryStatus, CashOnDeliveryPaymentGroup cashonDeliveryGroup);
public credit of CashOnDeliveryStatus (CashOnDeliveryInfo cashOnDeliveryInfo, CashOnDeliveryStatus cashOnDeliveryStatus, CashOnDeliveryPaymentGroup cashonDeliveryGroup);
Create CashOnDeliveryProcessorImpl application CashOnDeliveryProcessor processor pipeline
Create CashOnDeliveryStatus PaymentStatusImpl extension
create ProcProcessCashOnDelivery payment processor that extends ProcProcessPaymentGroup and replace authorizePaymentGroup, creditPaymentGroup and debitPaymentGroup methods to return the CashOnDeliveryStatus object
Create a bean object of CashOnDeliveryInfo containing all the data required by the methods of CashOnDeliveryProcessorImpl
Create ProcCreateCashOnDelivery pipeline processor, which should create CashOnDeliveryInfo and add it to the object PaymentManagerPipelineArgsDictionary
Add the pipelinechain in paymentpipeline.xml for an example
Add the new entry in PaymentManager.paymentGroupToChainNameMap
& paymentGroupToChainNameMap =.
xyz.payment.CashOnDeliveryPaymentGroup = cashOnDeliveryProcessorChain
Add the new class to the paymentTypeClassMap and add the new class of real estate beanNameToItemDescriptorMap to OrderTools and
& paymentTypeClassMap =.
cashOnDelivery = xyz.payment.CashOnDeliveryPaymentGroup
& beanNameToItemDescriptorMap =.
xyz.payment.CashOnDeliveryPaymentGroup=cashOnDelivery,\
xyz.payment.CashOnDeliveryStatus = cashOnDeliveryStatus
In OrderRepository.xml
Add to the point-descriptor paymentGroup
create descriptor of the item with the properties and create the db as a result table
Regardless of the required properties
Regardless of the required properties
It could be useful, Wow I spent 20 minutes on this
Maybe you are looking for
-
Customization of the devices in iTunes
I use iTunes to back up my devices (on pc). Is there a way to customize each device so that only certain apps, music, etc. are on a particular device? For example, I want everything on my main iPhone. However, I want to only a couple of movies and z
-
Hello!I bought my first HP yesterday. Today I plugged into my computer to update the firmware, but when I press the option to upgrade the firmware, the connectivity kit announces that he's not any upgrade available for my calculator, even if 5106 (20
-
I'm trying to load a vi that was written in version 8.6 with version 9.0. I received the following error message "Labview 45 error code: an error occurred while updating the fonts of the VI ' and terminate loading. Please advice. Concerning
-
I can't get my Age of Empires 2: Age of Kings drive on my computer. It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw. What exactly is DirectDraw. and how can
-
How to recover a updated version previous to a Wordpad file that I replaced with an old
Hi, I wrote a document in WordPad and I recorded it when I'm done. After closing the file, I accidentally replaced the updated with the old file which I kept in another folder. So now I can see the two files in two different places, with the old date