Add the State to drive value

Similar Questions

• Add the second hard drive to HPE-400Z

  I am trying to add a secondary hard drive to expand the storage space that I only have 10% of free space on the current.

  "Will buy one online" Seagate Desktop drive HARD 2 to 7200 tr / MIN SATA 6 Gb/s 64 MB Cache 3.5 "-drive retail Kit internal (STBD2000101)" enters the cage OK? Existing drive is Seagate 1 TB guess so, but do not get it and discover it doesn't work.

  This disc has new SATA data and power cables.

  It is clear that there is a free connection of motherboard "SATA2" for data, I can see it. Sounds easy.

  What I can't understand is where and how the POWER cable is connected to... or what might be able to be used which already exists for power connectors in the office. There is a certain and they all have beautiful marking... "P3,"P8",...".

  I found instructions on installing hard drive on HP site... everything is clear for me except for this problem of power cable.

  Did he help me with that?

  GWRootjr, welcome to the forum.

  This is an adapter 'Y' which should solve your problem:

  http://www.Walmart.com/msharbor/IP/24359037?wmlspartner=wlpa&adid=22222222227017782207&wl0=&WL1=g&WL2=t&WL3=40881390152&WL4=&wl5=PLA&wl6=78811224272&Veh=SEM

  You can connect a SATA power cable to do two on one.  This will allow you to connect the second HDD.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How to add the DVD RW drive in the Menu "send to" in Windows Vista Home Premium

  "I can't copy a document or an image on a DVD or CD because the ' send to ' ' menu does not have any CD or DVD drive.

  No guarantee... but the following article may be worth a visit:

  The CD drive or the DVD drive is missing from the shortcut menu "send to".
  and in the tab property by car after you erase a disc on
  a computer that is running Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/974913/en-us

  FWIW... it may be worth trying to add a shortcut to DVD - RW drive
  in your folder "send to."

  See the following link:

  Customize the Windows 7 or Vista send to Menu
  http://www.howtogeek.com/HOWTO/Windows-Vista/customize-the-Windows-Vista-send-to-menu/

  To create the shortcut... go to... Start / computer... right click
  the drive letter of your DVD - RW drive, and then in the menu
  Choose "create shortcut". The shortcut will probably
  sent to your desktop. By dragging the shortcut to your ' send
  To ' file should add the disc menu.

  Good luck...

• Add the second hard drive to a desktop Pc HP Pavilion P6-2100

  I want to add a second hard drive to a HP Pavilion A1700n Pc desktop to a new HP Pavilion P6-2100 Desktop Pc, so I can transfer files.

  milehisb,

  Welcome on the user forums.  Section manuals PDF from HP did not offer a guide to upgrade and Service.

  There are several options, depending on your needs and your expertise with the internal components of a computer.

  If you goal is to simply get the data off the drive, then put it back in the A1700n, I would use #1.

  (1) use this external adapter for occasional use:http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002

  (2) first search to find if you have a spare Sata power plug. Or you will need an adapter (molex 4pin to Sata).

  http://www.playtool.com/pages/psuconnectors/connectors.html

  http://en.Wikipedia.org/wiki/Serial_ATA

  As the player in question is VIsta, it does not start correctly and could delay the start of WIN7.

• Add the secondary hard drive to dv7-3130eo

  Anyone know if it is possible to use the secondary hard drive Bay on the above model.

  I searched and could not know whether or not it is supported. If it supports this what should I use to add an sdd drive

  Yes, it can be used. You just need the hard drive caddy and the connector like the one that is in the hard drive Bay. They are available online or on eBay for maybe $45.

  example of

  Yes, the hard drive can be an ssd. SSD drives have the same physical dimensions and connections such as a SATA drive. You need the money because I just don't see prices of SSDS come down to where I think it makes sense to invest in one. I ran an ssd in my last laptop... paid about $400 for a concert 128 2 years ago and I don't think they are much cheaper now, although they are better I guess. It was all that (fast, quiet, cool), but it was nagging little glitches on writing on the disc and occasionally she just sat there for a few seconds and think about doing something. I changed a standard 7200 RPM drive.

• cannot add the new hard drive more than 2 TB on vsphere upgrade 5

  can someone give me a clue? I can't add new greater than 2 TB drive to my vm on my upgraded vsphere 5.0. My data store is 6 TB and already read by vsphere... I create new virtual machine and add the new drive, but it limits again just 2 TB when I change 4 TB, the error message will appear. I recently added my datastore LUN with VMFS5 version. is there a any mistake I made? Please help me this problem is so frustrating me... i need to create new disk 6 TB to my new file server

  Hello.

  You will need to use a RDM in physical Compatibility Mode to achieve. As weinstein5 said, a VMDK cannot be greater than 2-to-512bytes. You can use the OS to spread over several 2 TB-512bytes VMDK, if that's what you really want.

  Good luck!

• Add the new hard drive into the data store in ESXi 4.1

  Hi all

  I got ESX 4.1 installed on the Dell server, and I have 3 virtual machines on a data store.

  I added a new 500 GB scsi hard drive to the server,

  and I need to add it to the datasore or create a new...

  How can I see this new hard drive? and add it to the data store?

  Waiting for your help.

  concerning

  Abrams

  Oracle system engineer

  Abrams,

  That's all I can help you.  These instructions are based on the Perc 5 / i controller, which I think you have on our system.  You have not specified the server so I just assumed that this is so.

  1. unscrew the hot spare that you just made.  Follow this link from Dell.
  http://support.Dell.com/support/eDOCS/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1061343

  2 follow the link for the installation of virtual disks - http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1069357

  This link has three steps to void, skip the step on "spare parts of designate hot."
  a. create the virtual disks and select virtual disk options.   -Online steps to create another disk group and add the new disk to the disk group.
  (b) designate the drives hot spares (optional). =>, YOU CAN SKIP THIS STEP
  c. initialize virtual disks. -online must do.  just do not initialize the incorrect disk.

  After the step #2 c, you should be able to access the drive in ESXi or command-line (list of nmp esxcli devices).

  And no, you cannot add this manaully until do you step #2 above which is to define the disk group, creating virtual disks and initialize the virtual disk.

  Good luck.

• How to keep the State page apex value after connection page

  Does anyone know to keep the State in a page of the apex, when I go to another page and come back? He keeps all the values entered into the fields, it seems that the gaps?
  
  I have 5 regions and each region have elements: text fields, selectors of dates, popup lov, field numbers, text box and view point only. When I go to the next page with redirect and return I see popup lovs values and values of one or two display items only. The values of the other text fields, dates selectors and the display just empty.
  
  Thank you everyone can help. Thank you.
  
  Kind regards
  Dragan

  Hello

  This element only display recording session state?
  Checks the attributes of the element.

  Kind regards
  Jari

  -----
  My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Cannot add the SCSi tape drive

  Hi all

  Im trying to add my HP tape drive to a virtual CentOS computer.

  When I add in the properties of the VM I get the following error:

  Cannot open SCSI device ' devices/vmfs/genscsi / vmhba3:5:0:0 '(scsi3:0): the file is not found. Cannot configure scsi3

  I found this article which seems to be my answer, but I do not have a .vmx file to edit in ESX 3.5.

  http://communities.vmware.com/thread/199408

  VMware Infrastructure Client

  1. "Configuration" - & gt; 'Storage' - & gt; Select target storage

  2. Please download * target VM *.vmx

  Edit the vmx file

  1. Edit *.vmx (wordpad, etc...)
     (Front)
     scsi0:1.present = 'true '.
     scsi0:1.DeviceType = "scsi-passthru.
     scsi0:1.filename = ' / vmfs/devices/genscsi / vmhba3:5:0:0. "
     scsi0:1.allowGuestConnectionControl = "false".
     (After)
     scsi0:1.present = 'true '.
     scsi0:1.DeviceType = "scsi-passthru.
     scsi0:1.filename = ' / vmfs/devices/genscsi / vmhba3:5:0.
     scsi0:1.allowGuestConnectionControl = "false".

  2. Download * *.vmx

  VMware Infrastructure Client

  ' Power On ' target VM

  One got the job?

  Thank you

  G

  but I do not have a .vmx file to edit in ESX 3.5.

  You must have a file for each virtual computer vmx.

  See: / vmfs/volumes/DatastoreName/VMname.

  André

• Add the second hard drive

  I replaced a faulty computer with a second hand replacement. Both are programmed with XP and the same browser. I installed the HDD in the position of the Tower slave, plugged the cable and Ribbon secondary and put power cord.  The computer does not recognize the additional hardware. Y at - it an easy way to simple transfer of data to the new hard drive, or is there a way to access the second hard disk drive so I can use the computer program?

  I replaced a faulty computer with a second hand replacement. Both are programmed with XP and the same browser. I installed the HDD in the position of the Tower slave, plugged the cable and Ribbon secondary and put power cord.  The computer does not recognize the additional hardware. Y at - it an easy way to simple transfer of data to the new hard drive, or is there a way to access the second hard disk drive so I can use the computer program?

  You have misused terminology in this issue, so it's a little difficult to determine what your problem may be caused.

  What do you mean by "the computer does not recognize the additional hardware?  Only shows drive in disk management (start > run > diskmgmt.msc > OK)?  If the player appears in disk management, but not in my computer, you may need to use disk management to assign a drive letter.

  It seems that if you want to take the faulty computer hard drive (in condition, of course, was not the hard drive itself which was defective) and put it in another computer.

  There is no such thing as a "slave of the Tower position."  Likely, you just put the old drive into an available drive Bay.

  Generally, the 'secondary' water is used for optical drives - not a second hard drive.  Usually, if there is only one hard drive, it is connected to the connector at the end of the water and the second hard drive is connected via the connector in the middle of the cable.  The cable connected to the primary IDE connector on the motherboard should be a 80 wire cable, while the other may be a 40 wire cable:http://www.mikeshardware.com/howtos/howto_connect_ide_hd.html

  When you have 2 drives connected on the same cable 80 wire, one is the 'master' (the one linked at the end of the cable) and the other is the "slave".  You specify the drive to this topic, what you are doing by correctly setting the jumper on the pins at the rear of the car.  You set the jumper on a 'master' and the other as 'slave' or two disks can be set for "Cable Select" If both support this and you have the special cable Select "Cable".

  However you connect, you must make sure that the drive of the old computer is defined as the slave drive, because you do NOT want to start from this installation of Windows.

  The foregoing assumes that both drives are the older IDE type of walk.  If one or both are SATA drives, it is quite something different.

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to add the new hard drive RAID 5 on

  I have Dell Powerdege 2900 server and I need to merge the new hard drive in a RAID 5

  Hi Sabry75

  If you have open Manage Server Administrator installed, you can do the merge from there. It's rebuild.

  You can refer to the guide to using OMSA below, look under the virtual disks of re-engineering/migration: -.

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Let us know how it goes.

• Add the second hard drive in the Dell Optiplex 780 SFF

  Hello

  I have dell Optiplex 780 SFF (Small Form Factor) PC. It has 3 options of SATA. I want to add 2nd hard drive in it, but I see no power for 2 hard drive cable.

  At the present time, I have a SATA Hard Drive and a SATA Super Combo. But the power cable from the SATA Super combo is very unique, I can not able to give the power of this cable to my 2nd hard drive.

  Is it possible to add 2 hard disk in the PC case?

  Best regards

  Dani

  Hi Dani,

  The SFF is using a drive slim lens that does not have a standard SATA power connection. You will need to buy an adapter or a SATA power cable splitter to power a second hard drive.

• Add the second hard drive to m8307c

  attempt to add a hard drive to a model of pc pavilion media 8307c.  the specs say there are 2 bays with a busy. so, without any verification, I ordered a second drive as the current becomes noisy and who knows what next.  Long story short, I don't see a second Bay for another drive.  Am I missing something? or was it a typing mistake?

  Second drive attaches to the bottom of the case. ... Not really a Bay point home.

  This should help:

  http://support.HP.com/us-en/document/c00639696

  Looks like you have bigger problems, if the drive gets noisy. Make sure that you back up your software and have a set of recovery disks. You can only connect your new drive as the master of Priomary and the recovery disks to set everything back to the factory.

• HP compaq 8200 elite sff: Add the second hard drive to 8200 elite sff

  I installed a second hard drive, but the system does not reqagnize it.  I connected the blue sata port.  Any help?

  Well shit, now I have to retype my response... I typed in Notepad, but it seems that I can't copy and paste into this box.

  I agree with DFBonnett, the second disc will only work on the BLACK, not BLUE light connector.

  The way I Win-10 to see the second drive was to go to the management of the computer, and then under storage, click Disk Management: the drive is presented as a disc 1 but not show the program explores until I received a letter from the disk drive... MAGIC, the player will now display as the letter assigned to the I gave him 'E' with a backup label.

  I tried what erico posted but has not worked, but I thank all of you who have tried to help.

  I give credit to Umbutu, he saw the drive without having to do anything myself.

  Hey Microsoft, look at what Linux can do... lol